Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plan vs. FCC rules: how do you decide where to operate from 160 m through 33 cm?

ci_cover.jpg

I'm trying to sort out how the pieces fit together: FCC Part 97 privileges, the ARRL band plan, and the informal calling frequencies people actually use. A few specific questions:

1. Which parts of a band plan are legal requirements, and which are just convention?
2. How close to a band edge is safe on SSB, given sidebands?
3. What's the story on 60 meters and its channels?
4. Where are the usual simplex calling and weak-signal frequencies on 6 m, 2 m, 70 cm and 33 cm?
5. How much of this changes outside the US?

Corrections welcome. Please say when something is a rule and when it's only a convention, since I know the band plan isn't law.

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Start with the legal-versus-voluntary split, because it answers half your questions. Part 97 (the FCC rules) sets which frequencies amateurs may use, which license classes may use which segments, which emission types are allowed where, and the power limits. Those are enforceable. The ARRL band plan is a voluntary agreement about how to share the space within those limits. It matters because of the good-practice and cooperation rules in 97.101, which say no frequency is assigned for the exclusive use of any station and that operators should cooperate in using the spectrum efficiently. Parking an SSB QSO on a weak-signal frequency probably won't earn a citation, but it's bad practice and you'll hear about it.

On privileges, here's the rough shape, and you should verify exact edges against the current rules chart. Technicians have all privileges above 50 MHz, plus limited HF: CW on parts of 80, 40 and 15 m, and CW/data plus SSB on 10 m (28.000–28.300 CW/data, 28.300–28.500 phone), at 200 W PEP. Generals get segments of every HF band, including all of 160, 30, 17, 12 and 10 m. On 80, 40, 20 and 15 m, though, the lowest slices are Extra-only. For example, General phone on 20 m starts at 14.225 and Extra phone at 14.150. Amateur Extra has everything. Novice and Advanced licenses are no longer issued, but existing holders keep their privileges.

On HF, the FCC assigns emission types by segment. The CW/data portions at the bottom of a band and the phone portions higher up aren't interchangeable just because a mode feels like it belongs there. 30 m is CW and data only, with a 200 W PEP limit, and it's shared with other services, so keep it quiet. Common FT8 dial frequencies (USB) like 3.573, 7.074, 10.136, 14.074, 21.074 and 28.074 MHz were chosen to sit inside the data segments. The FCC has also changed the data-emission limits in recent years (a bandwidth limit replacing the old symbol-rate limit), so check the current text instead of relying on older study guides.

For band edges, think about where the signal actually is, not where the dial says. In LSB, the signal extends below the displayed carrier frequency by roughly 2.7–3 kHz. If a General's phone segment starts at 3.800 MHz, a dial reading of 3.800 isn't a safe place to talk, so stay a few kHz inside. In USB, the signal extends above the dial, so near the top edge, such as 14.350, keep the dial about 3 kHz below it. Treat that as a margin of safety. Dial calibration isn't perfect, and drift matters.

On 60 m, the US doesn't have a continuous band like the others. It has five specific channels, shared with other users, so amateurs are secondary. Privileges are General and above, with a power limit expressed as 100 W PEP ERP relative to a half-wave dipole, which accounts for antenna gain. The operating dial frequencies in USB as commonly listed are 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz. Check the current rule text for the exact wording on emission types and bandwidth, since this section has been revised before. 5357.0 is the one you'll see most often for FT8.

  • Moderators

To add VHF/UHF and the international side. Here the band plan carries more weight than the rules, because the rules give you huge blocks (Technicians can use all of it) and the band plan is how people avoid tripping over each other. Everything below is from the ARRL plan as I know it. Check the current version before relying on exact figures.

6 m (50–54 MHz): the bottom of the band is for weak-signal work. 50.0–50.1 is CW, mostly beacons around 50.06–50.08. SSB calling is at 50.125, with a DX window just below it at about 50.100–50.130. FT8 is on 50.313. The national FM simplex calling frequency is 52.525.

2 m (144–148 MHz): the bottom is weak-signal: CW at the very bottom, SSB calling at 144.200, FT8 around 144.174. The FM simplex calling frequency is 146.520, and the plan reserves a simplex segment around it. Repeaters use paired frequencies, usually with a 600 kHz offset on 2 m. 145.800–146.000 is set aside for satellite use.

70 cm (420–450 MHz in the US): SSB/CW weak-signal calling is at 432.100. The FM simplex calling frequency is 446.000. Repeaters typically use a 5 MHz offset. Satellites are around 435–438. Also note that amateurs are secondary on 70 cm, and there are geographic restrictions near some government radar installations, so look at the footnotes in Part 97 if you're near one.

33 cm (902–928 MHz): this is an underused band. The FM simplex calling frequency is 927.500, and weak-signal work happens at the bottom, near 902.100 and 903.100 per the plan, though I'd verify these. Amateurs share the band with Part 15 devices and other licensed services, so expect noise, and we're secondary here too. 33 cm exists in ITU Region 2 (the Americas), but it isn't an amateur allocation in most of the rest of the world.

On international allocations, the ITU splits the world into three regions, and IARU coordinates amateur band plans for each. Region 1 is Europe, Africa, the Middle East and northern Asia. Region 2 is the Americas. Region 3 is the rest of Asia and the Pacific. The differences matter if you travel or work DX. For instance, 40 m is 7.000–7.200 in Region 1 but 7.000–7.300 in Region 2, which is why US stations above 7.200 are often not workable by European stations. The same goes for 80 m (3.500–3.800 in Region 1 versus 3.500–4.000 in Region 2) and for 2 m (144–146 versus 144–148). Power limits, license classes and even 60 m channel arrangements vary by country. If you operate abroad, your home privileges don't carry over by default, so look up the rules of the country you're in, or check reciprocal-operating arrangements.

For day-to-day use, the practical approach is: use the FCC chart for what you may do, use the ARRL or IARU plan for where to do it, and listen for a minute or two before calling. Edges and channel lists do get updated, so confirm the current versions of both documents.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.