Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Building a first field kit: EFHW or linked dipole, which pole, and how much battery do you really need?

ci_cover.jpg

Thinking about a basic field kit that works for both a drive-up park activation and a short hike to a summit. The goal is to cover most situations without a pack that weighs as much as a small child. The gear seems to fall into five decisions, and I'd like to see how people weigh them.

Antenna: an end-fed half wave (EFHW) with a 49:1 transformer is quick to deploy and needs only one support point. A linked dipole is a bit more fiddly because you walk out to the links when changing bands, but it is center-fed, so it tends to be less sensitive to the coax and counterpoise situation. For a typical 40/20/15/10 setup, which one earns its place in the pack? Does it change if you're mostly on SSB and want to hop bands, versus sitting on one band running CW?

Support: a 7 to 10 m telescopic fiberglass pole is the usual choice. An inverted V off the top works for a dipole, and an EFHW can run as a sloper or inverted L. What do you use to guy it? How do you keep the lower sections from creeping down in the wind or when wet? Is a few meters of extra height worth the weight, or is a shorter pole and a tree branch the better compromise?

Power: a small LiFePO4 pack (nominal 12.8 V) is popular because it holds voltage better than lead-acid and is lighter. For a QRP rig the capacity needed is small. A 100 W rig is a different story, since transmit current is high, and the BMS cutoff and voltage sag start to matter. Does anyone bother with solar for a one-day outing, or is it only worth it for multi-day camping or Field Day?

Logging: paper plus pencil as backup, digital as the main log? What do you record at the time, and what do you fix up afterwards? UTC, reference numbers, signal reports, and a note on band and mode make ADIF export much less painful later.

Safety: weather turns fast on exposed high ground. What are your hard stop rules for lightning, wind and heat, and how much of the plan do you leave with someone back home?

Let's share setups and what you'd change. Weight-saving tricks and "wish I'd packed that" items are especially welcome.

  • Replies 2
  • Views 27
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a single-band-at-a-time style, the EFHW is hard to beat on setup time. Wire out, transformer on, a few meters of coax, done. The thing people tend to forget is that an EFHW has no true ground or counterpoise unless you provide one. The coax shield often ends up doing that job, which means common-mode current on the feedline. A common-mode choke at the radio end and a short counterpoise wire (a few meters, or about 0.05 wavelength on the lowest band) at the transformer often make the SWR more stable and the RF less likely to bite you or get into the rig. Reading SWR across the band before you fully commit to the layout saves a lot of fiddling.

The linked dipole is nicer in one respect: you know what you have. Each band is a proper resonant dipole with a link in the right place, and it tolerates different heights and surroundings better. The cost is walking to the links, or lowering the pole, every time you change bands. If you plan to work one band for the whole outing, that cost vanishes. If you want to QSY quickly to chase contacts, a multiband EFHW or a tuner can be more practical.

On the pole, whatever you use, guy it at the top section at least, even with light line. Fiberglass poles flex, and wind plus a wire load can pull the top sections out of alignment. A bit of tape or a hose clamp at the joints, if the pole design allows it, keeps the sections from slipping.

  • Moderators

On batteries, do the math before buying. A QRP rig at 5 W on SSB averages well under an amp when you factor in receive time, so a small LiFePO4 pack of a few amp-hours covers several hours of operating. A 100 W rig can pull 20 A or more on transmit peaks, and the duty cycle on SSB is lower than people assume, but you still need a pack and a fuse rated for the load. Put an inline fuse close to the battery, use Powerpoles or similar for the connectors, and check what the pack's BMS does at its current limit. Some cut out suddenly, and that looks like the radio dying mid-QSO.

Solar is nice for longer stays, but it adds the charge controller to the equation. Some MPPT controllers generate noticeable hash on HF, so test with the receiver on before you rely on it. And don't connect a panel straight to the rig. Run it through a controller with a LiFePO4-appropriate charge profile.

For logging, paper is still the fallback that never runs out of battery. A pencil works in drizzle where a pen doesn't. For the digital side, a phone or tablet in airplane mode with offline software keeps the battery from draining searching for signal. Write the date, time (UTC), call, band, mode, and reports, then clean up and export the log afterwards when you're warm and dry.

On safety, set your turnaround rules before you leave. Building cumulus, thunder, or rising wind means the antenna comes down and you leave the exposed spot. A fiberglass pole is not lightning protection. Carry water, layers, a basic first-aid kit and a way to call for help, and make sure someone knows where you are and when to expect you back. For Field Day style setups the same ideas scale up: separate power from the generator where possible, keep antennas well apart, use band-pass filters if stations share a site, and plan for the weather your tent will actually face.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.