Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Choosing a handheld for ham use: Baofeng vs FT-65R vs D-STAR/DMR HTs, and what actually matters for emergencies

ci_cover.jpg

I'd like to get a discussion going on handhelds, because the advice for newer hams is often a pile of model numbers with no context. Here are the categories as I understand them, and some questions for the group.

Budget analog dual banders. This is the Baofeng UV-5R family and the Yaesu FT-65R. Both cover 2 m and 70 cm FM at about 5 W or less and are supported by CHIRP. The Baofeng is cheaper. The FT-65R generally gets credit for a better receiver front end and more predictable behavior around strong signals, and it comes from a company with real support and documentation. If you live near high-power paging or broadcast transmitters, receiver quality matters more than the spec sheet suggests.

D-STAR and multimode. The Icom ID-52A and Kenwood TH-D75 are the usual names here. Both are D-STAR capable, with GPS and Bluetooth, and both have wideband receive. The TH-D75 adds 220 MHz in some versions and has built-in APRS features. The ID-52A is a dual-band D-STAR handheld. The IC-705 sometimes gets thrown into HT lists, but it isn't really a handheld. It's a compact portable HF/VHF/UHF transceiver with D-STAR that you can carry in a bag. It's great for portable HF and satellite work, but it's a different tool from something on your belt.

DMR. DMR handhelds are usually a separate family from the Yaesu/Icom/Kenwood models above. They need a DMR ID, a codeplug with the right color codes, time slots and talkgroups, and a network or repeater near you. Check local activity before you buy. Digital modes only pay off if there's a repeater or hotspot you can reach.

Repeater basics worth getting right before you program anything. Offsets depend on your region's band plan. In the US, 2 m is typically ±600 kHz and 70 cm is typically ±5 MHz, but the sign (+ or −) depends on where the repeater sits in the band, and many also require a CTCSS tone for transmit. Always verify against a local repeater directory or the repeater owner's information rather than trusting a generic list. Also learn simplex and your local calling frequencies, since the repeater may be down exactly when you need to talk.

Programming with CHIRP. CHIRP is free and open source and works with many analog handhelds. The habit I'd recommend is to download the image from the radio first and save it as a backup before you upload anything. Cable problems are a common failure point, especially with cheap clone cables and driver issues. For D-STAR and DMR radios, check the CHIRP supported-radio list for your exact model. Some need the manufacturer's software for digital-specific settings.

Batteries and antennas. The stock rubber duck is usually the weakest part of a budget HT. Replacing it with a better aftermarket antenna, or using an external antenna such as a roll-up J-pole or a magnetic mount, often helps more than moving to a more expensive radio. Check the connector (SMA-female versus SMA-male, or an adapter to BNC) before ordering. For batteries, carry a spare Li-ion pack and, if your model supports it, an AA battery case. Charge and rotate your packs regularly rather than leaving them forgotten in a drawer.

Emergency use. A radio is only useful if you can operate it and you know who you'd talk to. Keep a printed list of local repeaters, simplex frequencies and your net schedule. Program those channels and name them clearly. Keep a power-saving plan too: low power by default, and high power only when needed.

Questions for the thread: if you were advising someone with a budget of one radio, would you point them at a proven analog dual-bander or a digital HT? And how do you set up channel banks so a stressed person can find what they need?

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first radio I'd lean analog, mostly because it works everywhere there's a repeater and you can learn the fundamentals first: offsets, tones, squelch, simplex etiquette, and how much your antenna matters. The FT-65R is a reasonable choice if you want something simple. If you go with a Baofeng, buy a better antenna and spend a bit of time confirming the radio is programmed for legal frequencies and sane power settings. CHIRP makes that easy, but it also makes it easy to push in a bad channel list.

On the digital side, D-STAR and DMR are fun but they add layers: callsign registration for D-STAR, a DMR ID and talkgroup structure for DMR, and often a hotspot if your area has no coverage. I'd only buy a digital HT if I'd confirmed there's something local to talk to, or if I already knew I wanted APRS or GPS features. The TH-D75 and ID-52A are capable radios, but they're not the cheapest way to learn.

  • Moderators

On channel layout for emergencies, I'd keep it boring. Put the most important local repeaters in the first few memory slots with names that make sense at a glance, such as the repeater callsign or net name. Add a few simplex channels next, then everything else further back. If your radio supports memory banks or groups, use them: one for local repeaters, one for simplex, one for events or nets.

Also keep a paper sheet with the same information in the same order. Screens fail, batteries die, and someone else may need to pick up your radio. List frequency, offset direction, tone, and what the channel is used for. And test the radio on the air occasionally instead of just checking that it powers on. It's the only way to find out your tone, offset or antenna connection is wrong before you need it.

One more point on batteries: if a radio supports both a Li-ion pack and an alkaline AA case, the AA case is usually lower power, so treat it as a backup rather than a normal operating mode.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.