Planning a first portable QRP setup: 5 W CW/SSB, kit vs. KX2/KX3, antennas and LiFePO4 power
- Replies 2
- Views 30
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Admin_Lee 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'm putting together a plan for a lightweight portable QRP station and want to compare approaches before spending money. The goal is parks, summits and backyard operation, mostly CW with the option of some SSB, and a pack that stays small and light. These are the questions I'm trying to sort out.
1. Rig choice. The options seem to fall into three groups. The first is a full-featured portable such as the Elecraft KX2 or KX3: multiband, CW/SSB/digital, internal ATU options, and more power available (the KX2 is rated around 10 W and the KX3 around 15 W on external power, so check the manual for the exact limits). The second is a compact CW-only monobander or small multibander like the Mountain Topper or the Penntek TR-35, which are cheap and tiny and draw very little current. The third is a build-it-yourself kit from Hendricks or a Pixie-style rig, where the point is partly the building. Is it sensible to start with a simple kit for the learning, or do you end up spending more time fixing a poor first station than making contacts?
2. Power level. The usual QRP definition is 5 W output on CW and 10 W PEP on SSB, with QRPp generally meaning 1 W or less. The difference between 5 W and 100 W is about 13 dB, roughly two S-units at the other end. That is real, but a better antenna is often worth more than extra watts. How do you decide when to stay at 5 W and when a bit more power is worth the battery drain?
3. Antennas. I'm weighing an end-fed half-wave on a 49:1 transformer, a resonant or linked dipole, and a vertical with a few radials. The EFHW is quick to deploy, but I know matching and common-mode current on the coax can be a problem. The dipole is simple but needs a support at the center. What are the trade-offs for a pack that has to cover several bands?
4. Power. LiFePO4 looks attractive because of the flat discharge curve and light weight. A 4S pack is nominally 12.8 V and can sit above 13.5 V when charged, which matters for a rig with a maximum input voltage. What should I check before connecting one directly, and what fusing and connectors make sense?
5. Operating. For finding contacts at low power, I'm aware of the commonly used QRP calling frequencies, such as around 7.030 and 14.060 MHz on CW and around 7.285 and 14.285 MHz on SSB, plus the other HF CW spots near x.060. The calling frequencies are only a convention and may differ by region and band plan, so I'll check the local rules. Is QRP-ARCI worth joining for the contests and awards, or can I get most of the benefit from spotting networks and casual calling?
If you have a rough priority order for these decisions, or a typical packing list, I'd like to hear it.
Link to comment
https://www.hamradiobase.com/forums/topic/11517-planning-a-first-portable-qrp-setup-5-w-cwssb-kit-vs-kx2kx3-antennas-and-lifepo4-power/Share on other sites