ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Repeater basics that trip people up: offsets, tones, time-out timers, linking and etiquette
This thread is meant as a working reference for anyone new to repeaters, and as a place for regulars to correct or add to it. Most repeater problems come from a small set of mistakes: wrong offset, wrong tone setting, not knowing the system is linked, or treating a shared machine like a private simplex channel.
Offsets and splits. A repeater receives on one frequency (its input) and transmits on another (its output). Your radio listens on the output and transmits on the input, so it needs the right shift. In the US the common conventions are 600 kHz on 2 m, 5 MHz on 70 cm and 1.6 MHz on 1.25 m. The direction (plus or minus) depends on where in the band the output sits. IARU Region 1 uses different conventions, such as 600 kHz on 2 m and 7.6 MHz on 70 cm. Many radios have an auto-repeater-shift feature, but it only follows a general band plan. It is not guaranteed to match any given machine, so check the listing and the display.
Tones. CTCSS (often called PL, which is a Motorola trade name) is a sub-audible tone between roughly 67 and 254 Hz that your radio sends along with your voice. Many repeaters ignore any signal without the correct tone, which keeps them from opening on noise and unrelated users on the same channel. The menu wording on radios is confusing. "Tone" usually means your radio encodes the tone on transmit only. "Tone squelch" or "TSQL" means it also requires the tone on received audio before opening the speaker. DCS does the same job with a digital code (three-digit octal numbers like 023) instead of a continuous tone. Some repeaters use different tones for input and output, and some radios let you set them separately ("cross tone" or similar).
Time-out timers. Nearly every repeater has a time-out timer (TOT) that drops the transmitter if one signal holds it too long. The limit is set by the owner and is often between one and three minutes. The courtesy tone is commonly tied to that reset, so wait for it before you talk again. Letting a second or two of dead air pass between transmissions also gives others a chance to break in, which matters for emergency traffic.
Linking. Many repeaters are connected to other repeaters or to the internet, and the systems differ:
EchoLink is a VoIP system for licensed amateurs. Nodes are validated and have node numbers, and a repeater or simplex node can be linked to the network.
IRLP is another VoIP system that uses node numbers and DTMF commands to connect nodes.
AllStarLink is built on Asterisk and runs nodes and hubs that can be connected by DTMF or other control methods.
Wires-X is Yaesu's system for Fusion (C4FM) radios, using nodes and rooms.
DMR is TDMA with two timeslots per channel, color codes, talkgroups and a DMR ID on the radio. A repeater's talkgroup and timeslot choices decide who hears you.
D-STAR uses callsign routing and reflectors, with fields in the radio such as URCALL, RPT1 and RPT2 that must match how the repeater is configured.
Which of these a repeater uses, and when the link is up, varies by system. Look in the listing or the club's site rather than guessing.
Open and closed, and coordination. An open repeater can be used by any properly licensed operator within the rules and the owner's posted guidelines. A closed repeater limits access, often to members or by a required tone or code. Coordination is the process where a recognized regional body helps assign frequencies and pairs to reduce interference. How this works and what legal weight it carries depends on your country and region, so ask your local coordinator or club.
Etiquette. Listen first, and pause between transmissions. Don't kerchunk (key up without speaking) just to see if the repeater works. If you want to check your signal, say your callsign and ask for a signal report. You don't need to say "CQ" on a repeater, because "monitoring" or a short callsign announcement works better. Keep conversations short enough to leave room for others. Follow the club's rules on nets, linking and commercial or political talk. On a linked system, remember that your audio may reach a lot of people you can't hear.
Directories. Directories such as RepeaterBook and club or coordinator lists are useful but can be out of date. Treat a listing as a lead and confirm the offset, tone and access rules by listening or contacting the owner. If a repeater is useful to you, consider joining the club that maintains it. Many repeaters depend on member dues and donations.
What have I missed? Specifically, what menu terminology confuses people on your radio, and what's the best way to confirm a repeater's settings before programming it?
This thread is meant as a working reference for anyone new to repeaters, and as a place for regulars to correct or add to it. Most repeater problems come from a small set of mistakes: wrong offset, wrong tone setting, not knowing the system is linked, or treating a shared machine like a private simplex channel.
Offsets and splits. A repeater receives on one frequency (its input) and transmits on another (its output). Your radio listens on the output and transmits on the input, so it needs the right shift. In the US the common conventions are 600 kHz on 2 m, 5 MHz on 70 cm and 1.6 MHz on 1.25 m. The direction (plus or minus) depends on where in the band the output sits. IARU Region 1 uses different conventions, such as 600 kHz on 2 m and 7.6 MHz on 70 cm. Many radios have an auto-repeater-shift feature, but it only follows a general band plan. It is not guaranteed to match any given machine, so check the listing and the display.
Tones. CTCSS (often called PL, which is a Motorola trade name) is a sub-audible tone between roughly 67 and 254 Hz that your radio sends along with your voice. Many repeaters ignore any signal without the correct tone, which keeps them from opening on noise and unrelated users on the same channel. The menu wording on radios is confusing. "Tone" usually means your radio encodes the tone on transmit only. "Tone squelch" or "TSQL" means it also requires the tone on received audio before opening the speaker. DCS does the same job with a digital code (three-digit octal numbers like 023) instead of a continuous tone. Some repeaters use different tones for input and output, and some radios let you set them separately ("cross tone" or similar).
Time-out timers. Nearly every repeater has a time-out timer (TOT) that drops the transmitter if one signal holds it too long. The limit is set by the owner and is often between one and three minutes. The courtesy tone is commonly tied to that reset, so wait for it before you talk again. Letting a second or two of dead air pass between transmissions also gives others a chance to break in, which matters for emergency traffic.
Linking. Many repeaters are connected to other repeaters or to the internet, and the systems differ:
Which of these a repeater uses, and when the link is up, varies by system. Look in the listing or the club's site rather than guessing.
Open and closed, and coordination. An open repeater can be used by any properly licensed operator within the rules and the owner's posted guidelines. A closed repeater limits access, often to members or by a required tone or code. Coordination is the process where a recognized regional body helps assign frequencies and pairs to reduce interference. How this works and what legal weight it carries depends on your country and region, so ask your local coordinator or club.
Etiquette. Listen first, and pause between transmissions. Don't kerchunk (key up without speaking) just to see if the repeater works. If you want to check your signal, say your callsign and ask for a signal report. You don't need to say "CQ" on a repeater, because "monitoring" or a short callsign announcement works better. Keep conversations short enough to leave room for others. Follow the club's rules on nets, linking and commercial or political talk. On a linked system, remember that your audio may reach a lot of people you can't hear.
Directories. Directories such as RepeaterBook and club or coordinator lists are useful but can be out of date. Treat a listing as a lead and confirm the offset, tone and access rules by listening or contacting the owner. If a repeater is useful to you, consider joining the club that maintains it. Many repeaters depend on member dues and donations.
What have I missed? Specifically, what menu terminology confuses people on your radio, and what's the best way to confirm a repeater's settings before programming it?
Link to comment
https://www.hamradiobase.com/forums/topic/11542-repeater-basics-that-trip-people-up-offsets-tones-time-out-timers-linking-and-etiquette/Share on other sites