Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Reading the ARRL band plan vs. FCC rules: where to operate, band edges, 60 m channels, and VHF/UHF calling frequencies

ci_cover.jpg

I'm trying to get a clear mental model of how all the "where do I operate" information fits together. There seem to be several layers: the FCC rules, the ARRL band plan, ITU regions, and then the habits of whoever is on the air. A few specific questions:

1. Which of those layers is legally binding, and which is just convention? For example, is staying out of the FT8 watering hole on 20 m a rule or a courtesy?

2. How do you handle band edges properly? If a General's phone privileges start at a given frequency, where do you set the dial on LSB or USB so the signal stays inside?

3. What's the deal with 60 meters being channelized instead of a continuous band?

4. On 6 m, 2 m, 70 cm and 33 cm, which simplex and calling frequencies are worth knowing, and how much of that is local?

5. What changes when you operate outside the US or talk to stations in other ITU regions?

Corrections welcome. I'd rather hear "that's regional" than have a wrong number stick in my head. Everyone should also check the current FCC Part 97 text and the current ARRL band plan, since both get revised.

  • Replies 2
  • Views 27
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Start with the legal/voluntary split. The FCC rules in Part 97 (the band and subband tables in 97.301 through 97.305, plus the special rules in 97.303 for particular bands) are binding. They set your frequency limits by license class, the allowed emission types per segment, and the power limits. The ARRL band plan is a voluntary recommendation that sits inside those limits. Nobody can cite you for parking FT8 on a frequency traditionally used for SSB, but you'll get QRM and a bad reputation. Using a mode outside the segment where the rules allow it is a different matter, and that's a violation.

Privileges by class, briefly. Technicians get all modes on 50 MHz and up, plus limited HF: CW on parts of 80, 40 and 15 m, and CW/RTTY/data on 28.000-28.300 and SSB on 28.300-28.500 at 200 W PEP. Generals get segments of every HF band, including 160 m, 30 m, 17 m and 12 m, but not the whole of 80, 40, 20 and 15 m. Amateur Extra gets everything. The mode restrictions matter too: 30 m is CW and data only, with a 200 W PEP limit, and General phone on 75 m starts at 3.800 while Extra phone starts at 3.600. Novice and Advanced licenses are no longer issued, but existing holders keep their old privileges. Use the 97.301/97.305 tables rather than memory for the exact edges. Different classes have different cutoffs on 80, 40, 20 and 15 m and it's easy to misremember them.

Band edges. The frequency on your dial is not the edge of your signal. On USB the signal extends from the dial frequency upward by roughly 2.5-3 kHz. On LSB it extends downward by the same amount. So if your phone privileges begin at 3.800 MHz and you're on LSB, a dial reading of 3.800 puts part of your signal outside the band. Keep the dial a few kHz inside, and do the same at the top edge. On 20 m with USB, the dial should be a few kHz below 14.350, not on it. Digital modes need the same care, because the whole occupied bandwidth must be inside, not just the dial frequency. Radio dials can also be off by a little, so leave margin for that too.

On HF the main segments, going by the ARRL plan, are CW and narrow digital near the bottom of each band, then wider data, then phone. A few well-known conventions: QRP CW calling frequencies (14.060, 7.030, 21.060, 28.060 and 3.560), the 14.100 IBP beacon area, and the FT8/FT4 dial frequencies like 7.074, 14.074 and 21.074 for FT8. Those digital frequencies are conventions that spread by usage, not entries in the FCC tables. On 160 m the 1.830-1.840 stretch is generally treated as a DX window.

60 m is different. In the US it's five discrete channels rather than a band, available to General and above, with a 100 W PEP effective radiated power limit referenced to a half-wave dipole. The channel dial frequencies for USB are 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz. The channel center is 1.5 kHz above each of those, so check whether your rig expects a dial or a center frequency. Phone is USB only. The rules also allow CW and certain data modes on the channels, subject to the bandwidth limits. Read the current 97.303 text before using a new mode there.

  • Administrators

On VHF/UHF, the band plan is much more about habit than HF is. Rough picture of the ones you listed:

6 m (50-54 MHz): CW-only at the bottom, 50.0-50.1. The SSB/CW calling frequency is 50.125. FT8 is usually found around 50.313. The national FM simplex calling frequency is 52.525. Beacons sit in the low part of the band. Weak-signal activity clusters low in the band and FM/repeaters sit higher.

2 m (144-148 MHz): 144.200 is the SSB calling frequency, with weak-signal and EME work at the bottom of the band. 146.52 is the national FM simplex calling frequency. 144.390 is the North American APRS frequency. FT8 is typically around 144.174. Repeater inputs and outputs are in defined blocks with standard offsets. Simplex frequencies in the ARRL plan include 146.40-146.58 (with some exceptions) and 147.42-147.57, but local coordination can differ, so check your area's frequency coordinator's list. Your local repeater coordinator is the real authority on which pairs are used and what offset applies.

70 cm (420-450 MHz in the US): 446.000 is the national FM simplex calling frequency and 432.100 is the SSB/CW weak-signal calling frequency. The common repeater offset is 5 MHz, but local coordination decides. The band is shared with other services, and 97.303 has geographic restrictions in some areas (near certain radar installations, for example), so it's worth checking if you operate near the edges of the band or in unusual locations.

33 cm (902-928 MHz): US Region 2 only, shared with a lot of unlicensed and industrial devices. Weak-signal calling is near 902.1 MHz, with 903.1 as an alternate. Activity is sparse and mostly local or in specific groups, so your equipment and local coordination matter more than a fixed list. Verify frequencies against the current band plan.

Practical tip for simplex calling frequencies: they're for making contact, not for rag-chewing. Call, then move to a clear nearby simplex frequency by agreement. Also remember that FM and SSB users are on different parts of the band.

International allocations: the world is divided into ITU Regions 1, 2 and 3, and the US is in Region 2. 40 m is 7.000-7.300 in Region 2 but 7.000-7.200 in Regions 1 and 3. 80/75 m also differs. 2 m is 144-148 in Regions 2 and 3, but 144-146 in Region 1. 70 cm is a narrower slice (commonly 430-440) in much of Region 1. 33 cm is Region 2 only. 6 m availability varies a lot by country, and 60 m allocations vary too. Within a region, each country sets its own rules. Your US license doesn't automatically grant privileges abroad, so check the host country's rules and any reciprocal operating agreement before transmitting. When you work someone in another region, check that you aren't operating where they can't legally respond, since split operation is common on DX.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.