ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Building a first go-kit for SOTA/POTA: EFHW or linked dipole, and what else goes in the bag?
I'm putting together a basic field kit for summit and park activations and want to hear how others balance weight, setup time and reliability. This is the setup I'm weighing up, with the questions I can't settle.
Antenna. The two obvious options are an end-fed half-wave (EFHW) and a linked dipole. The EFHW's appeal is that you hang one wire, plug in a 49:1 or 64:1 matching unit and work several bands with no walking back to the pole. The usual trade-offs are that it needs some counterpoise (even a short wire or the coax shield), that it benefits from a common-mode choke at the rig end, and that the feedpoint matching unit is the part that can get hot or fail at higher power. A linked dipole is simple and usually efficient, but changing band means lowering the wire or walking out to move the links. For a summit with a short activation window, that is a real cost.
Support. A telescopic fiberglass pole is the standard answer, with a guy ring and some cord to keep it vertical. Questions for the group: do you run the wire as an inverted-L or inverted-V, and how do you keep the pole from collapsing in wind? Also keep any pole, and especially a conductive one, well clear of power lines.
Power. A small LiFePO4 pack is attractive for the weight and the flat discharge curve. A few things to check before you leave: the rig's maximum input voltage against a fully charged pack (around 14.4 to 14.6 V on charge, a bit lower resting), an inline fuse close to the battery, and whether the pack has a BMS that can cut off under a transmit current spike. For solar, I'd treat a panel as a top-up for multi-day trips rather than something to rely on during a two-hour activation. Don't charge LiFePO4 below freezing unless the pack is rated for it.
Logging. I want paper as the primary record and a digital export afterwards. A pencil, a waterproof notepad, UTC time, callsign, band, mode and the park or summit reference cover the essentials. Then it's typed into a logger or converted to ADIF at home. Check the current rules for your program for the minimum number of contacts, since they differ between SOTA and POTA and can change.
Weather and safety. A radio kit adds a tall conductive pole to an exposed place, so the decision to pack up early has to be made before you leave home. Lightning, wind, cold and the walk back in fading light matter more than a few extra contacts.
What would you add or cut from this list, and where did you find the weight savings that were actually worth it?
I'm putting together a basic field kit for summit and park activations and want to hear how others balance weight, setup time and reliability. This is the setup I'm weighing up, with the questions I can't settle.
Antenna. The two obvious options are an end-fed half-wave (EFHW) and a linked dipole. The EFHW's appeal is that you hang one wire, plug in a 49:1 or 64:1 matching unit and work several bands with no walking back to the pole. The usual trade-offs are that it needs some counterpoise (even a short wire or the coax shield), that it benefits from a common-mode choke at the rig end, and that the feedpoint matching unit is the part that can get hot or fail at higher power. A linked dipole is simple and usually efficient, but changing band means lowering the wire or walking out to move the links. For a summit with a short activation window, that is a real cost.
Support. A telescopic fiberglass pole is the standard answer, with a guy ring and some cord to keep it vertical. Questions for the group: do you run the wire as an inverted-L or inverted-V, and how do you keep the pole from collapsing in wind? Also keep any pole, and especially a conductive one, well clear of power lines.
Power. A small LiFePO4 pack is attractive for the weight and the flat discharge curve. A few things to check before you leave: the rig's maximum input voltage against a fully charged pack (around 14.4 to 14.6 V on charge, a bit lower resting), an inline fuse close to the battery, and whether the pack has a BMS that can cut off under a transmit current spike. For solar, I'd treat a panel as a top-up for multi-day trips rather than something to rely on during a two-hour activation. Don't charge LiFePO4 below freezing unless the pack is rated for it.
Logging. I want paper as the primary record and a digital export afterwards. A pencil, a waterproof notepad, UTC time, callsign, band, mode and the park or summit reference cover the essentials. Then it's typed into a logger or converted to ADIF at home. Check the current rules for your program for the minimum number of contacts, since they differ between SOTA and POTA and can change.
Weather and safety. A radio kit adds a tall conductive pole to an exposed place, so the decision to pack up early has to be made before you leave home. Lightning, wind, cold and the walk back in fading light matter more than a few extra contacts.
What would you add or cut from this list, and where did you find the weight savings that were actually worth it?
Link to comment
https://www.hamradiobase.com/forums/topic/11558-building-a-first-go-kit-for-sotapota-efhw-or-linked-dipole-and-what-else-goes-in-the-bag/Share on other sites