Which online tools do you actually stack together for spotting, propagation checks and logging?
- Replies 2
- Views 22
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Tom 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
There are a lot of ham radio web tools and apps now, and many of them overlap. Here is how the main ones differ, to start a discussion about how people combine them. Corrections and additions are welcome.
Spotting sources are not interchangeable. A traditional DX cluster (DXSpider, AR-Cluster and CC Cluster nodes are common software) shows spots that people or software have entered: frequency, DX call, spotter call, a comment and a UTC time. QRZ's DXWatch and HamQTH's cluster pages present similar spot data in a browser, so you don't need a telnet client or logging program just to see what is being reported. The Reverse Beacon Network works differently. Skimmer receivers decode CW and RTTY and automatically report stations that appear to be calling CQ, along with a signal-to-noise figure and sometimes speed. That makes RBN good for answering "is my signal getting out on this band right now?" It also means a station only shows up if it called CQ in a way a skimmer recognizes, and the SNR you see is what that particular skimmer heard, not what a station across the continent would hear.
PSK Reporter plays a similar role for digital modes. Software such as WSJT-X can send reception reports, so you can see who has heard your FT8 or FT4 signal and where. The map is a quick sanity check on an antenna change or a band opening. The limit is that it only shows where receivers were listening. Silence from a region can mean no path, or just nobody monitoring there.
POTA and SOTA have their own spotting systems. The POTA site and SOTA's spotting pages list activators by reference, frequency and mode, and activators or chasers can post spots. The reference (a park or summit ID) matters as much as the callsign, because that is how you confirm you are chasing the right activation and log it properly. Activators in poor-coverage areas often depend on someone else to spot them, so it is worth knowing the etiquette of each system.
Lookup and reference tools fill the rest of the picture. QRZ.com and HamQTH are the usual callsign databases, with logbooks and, on QRZ, XML lookup for logging programs that support it. RepeaterBook is handy for finding repeaters and exporting channel lists for radio programming, but it is a directory that depends on listings being kept current, so check offsets, tones and operating status before relying on an entry. HamStudy is a study aid for the exam question pools. HamCalc is a long-running collection of radio and electronics calculators. For propagation, people usually combine solar indices (solar flux, A and K indices) with a prediction tool such as VOACAP-based sites, plus a Maidenhead grid map to check bearings and distances.
A few specific questions for the thread:
1. When you chase a DX spot, do you trust the cluster comment, or do you verify by ear (or with an RBN/PSK Reporter check) before calling?
2. How do you handle grid squares? Is 4-character precision enough for contest and award exchanges, or do you want 6 characters whenever possible?
3. On a phone, which tools are worth installing as apps and which work better as bookmarked web pages, especially when portable with weak cell service?
Link to comment
https://www.hamradiobase.com/forums/topic/11564-which-online-tools-do-you-actually-stack-together-for-spotting-propagation-checks-and-logging/Share on other sites