Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Starting out in QRP: 5 W CW/SSB, kits vs. KX2/KX3, antennas and portable power

ci_cover.jpg

I'd like to get a thread going on practical QRP operating, especially for people deciding where to start. By convention, QRP means 5 watts output or less on CW and 10 watts PEP or less on SSB. That is the figure QRP-ARCI and most QRP contests use. Rigs like the Elecraft KX2 and KX3 can be set above that, so check your power setting before you call CQ in a QRP event.

The first thing to get straight is how much 5 W actually costs you. Going from 100 W to 5 W is about 13 dB, which is roughly two S-units on the other station's meter. It isn't a disaster, but it also isn't nothing. The antenna, the band choice, the time of day and your operating technique usually matter more than the power knob. A resonant antenna in the clear will often beat a compromise antenna with a lot more power behind it.

Here are some topics I'd like people to weigh in on:

  • Rig choice. The KX2 and KX3 are full-featured multimode portable rigs, so you get SSB, CW and digital modes in one box, but they cost accordingly. The Mountain Topper line and the Penntek TR-35 are compact, CW-only transceivers built around low current draw and light weight, which suits summit activations. Kits and simple designs, such as Hendricks QRP kits and Pixie-style transceivers, are more about learning and building than raw performance.
  • Calling frequencies. Commonly used CW QRP spots are around 3.560, 7.030, 10.106, 14.060, 21.060 and 28.060 MHz. For SSB, 7.285, 14.285 and 28.885 MHz are often listed. Check current band plans and your local rules, since allocations differ by region and licence class.
  • Antennas. End-fed half-wave wires with a matching transformer, simple inverted-V dipoles, linked dipoles and a wire with a tuner and counterpoise are all common choices. What are people actually deploying, and how are you getting them up?
  • Power. Small LiFePO4 packs are popular for portable use. Where do you land on LiFePO4 versus LiPo versus sealed lead-acid?

What would you tell someone buying their first QRP station, and what would you tell someone who wants to build their first one?

  • Replies 2
  • Views 26
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first station I'd split the decision by what you want to do. If you want one radio that can do SSB, CW and digital modes on several bands, a KX2 or KX3 is the straightforward answer. The caveat is that they're a lot of radio to carry into the field if all you plan to do is chase CW contacts from a hilltop. For that, a Mountain Topper style rig or a TR-35 gets you a smaller, lighter package with a lower current draw, but you give up bands, modes and features.

On the kit side, a Pixie is a very cheap way to learn how a transmitter and a direct-conversion receiver work. The thing to know going in is that selectivity is poor and the whole thing is often crystal-controlled. You'll hear a lot of the band at once and have little control over where you transmit. It's a fine learning project and a fun one, but it's a different experience from a modern CW rig with a proper filter and a VFO. I'd say build one for the sake of building it, and don't expect it to be your main portable station.

One habit worth adopting early is to call CQ on or near the QRP frequencies and to listen more than you transmit. Plenty of QRP contacts come from answering other people's CQs. A 5 W signal tends to do better when the other station is already listening for weak calls.

  • Administrators

Antenna and power setup is where I'd put most of the effort. An end-fed half-wave with a 49:1 style transformer is popular because it's quick to deploy and works on its fundamental and harmonics. The catch is that the feedline can become part of the antenna, so it's worth adding a common-mode choke and watching how the SWR changes as you move the coax. A resonant dipole or inverted-V takes slightly longer to set up but usually plays nicer with the rig, and it needs no tuner if you trim it properly. Height helps a great deal. Even getting the centre of a dipole up on a light mast or into a tree beats a low wire laid along the ground.

For batteries, 4S LiFePO4 packs are attractive because the voltage stays fairly flat during discharge, they're lighter than lead-acid, and they tolerate a lot of cycles. Fully charged, a 4S pack sits around 14.4 to 14.6 V, so check the maximum input voltage of your rig. Some portable rigs have a limit around 15 V, and others have less headroom. Because the voltage stays flat, a basic voltmeter won't warn you much before the pack cuts off, so a small battery monitor is worthwhile. A 3S LiPo works too, but it needs more care with charging and with not draining the cells too low.

If you operate on SSB at 5 to 10 W, speech processing and a good microphone gain setting can make a bigger difference than people expect. On CW, a clean, well-timed call with your callsign sent once or twice is often enough. For anyone interested in the competitive side, QRP-ARCI runs operating events and awards, including the 1000 Miles Per Watt award, which rewards efficiency over brute power.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.