Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning your first POTA activation: 10 QSOs, spotting, logging, and two-fer questions

ci_cover.jpg

This thread is for anyone getting ready for a first activation, or hunting from home and wondering what activators need from you. Here is a quick baseline, then some open questions.

The basics. Every park has a reference made of an entity prefix and a number, such as K-0001 in the US-style format. Other countries use their own prefixes. Always confirm the exact reference on the park listing at pota.app before you go. Similar park names and adjacent units can trip people up.

Activator vs. hunter. An activator operates from inside a park. A hunter contacts activators from anywhere, including home, mobile, or another park. A valid activation generally requires 10 QSOs within a single UTC day. Hunters get credit for each park they work, regardless of how many contacts the activator reaches. Check the current program rules for how duplicate contacts on different bands or modes are treated, since details can be updated.

Spotting. Activators usually post a spot on the POTA site or app with frequency, mode, and park reference. That gets hunters to you. Spots also appear automatically from some skimmer-based systems for CW and digital. Hunters typically look at the spot list, tune in, listen for the activator's pattern, and call once. If the activator is working a pileup, listen for a few exchanges to learn whether they want the call sign only or something more, then keep it short.

Logging. Activators submit ADIF logs for each park and UTC date, and the POTA site has a filename convention and field requirements. Hunters can use the same data to track their own contacts. Many loggers can populate the park reference fields so you don't have to type them for every QSO. Read the current logging guide first, especially for rovers and multi-park setups.

Two-fers and roving. Some locations sit inside more than one reference, such as a state park overlapping a national trail. That is a two-fer, or sometimes a three-fer. Contacts are generally logged for each reference, but you still need to meet the activation threshold for each park you want credited. A rove means visiting several parks in a day. UTC date boundaries matter here: 10 QSOs in one park spread across two UTC dates may not count as an activation for either.

Antennas and power. The program does not demand a particular setup, only that you follow your license privileges and the park's own rules. Typical choices are a 5 to 20 W portable rig with an end-fed half-wave, a vertical with radials, or a simple dipole on a mast or tree. QRP is common, but the best power level is whatever gets you through the pileup within park rules and local noise limits.

Park rules. Parks are managed by different agencies, and rules about antennas, hours, vehicles, generators, and staking or climbing trees can vary a lot. Check the park's regulations or contact the managing office when in doubt, and be prepared to stay in a legal operating area.

Questions to get things started: for a first activation, would you choose SSB, CW, or FT8 to reach 10 QSOs most reliably? What do you think is the most useful tool for hunters: the website, the app, or logging software that reads spots?

  • Replies 2
  • Views 30
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first activation, I'd pick the mode you can operate most comfortably when the band is imperfect. SSB is usually easiest to get started with, since hunters tend to gather there, but it can get crowded and needs decent audio. CW can be very efficient with low power and simple antennas if you're comfortable copying call signs at speed. FT8 can fill a log, but remember that it's a different workflow, and spots and logging need extra care so contacts don't get mixed up.

A few practical points:

  • Pick a frequency, listen long enough to confirm it's clear, then post a spot with the correct park reference and mode.
  • Update your spot if you change frequency, and don't leave a stale spot up after QRT.
  • Keep a paper backup of calls in case your logging software or phone dies.
  • Verify the UTC date before you start so you don't accidentally split an activation across a date boundary.

Reaching 10 QSOs is the minimum, not the goal. Having a few extras gives you a safety margin for busted calls or contacts you can't confirm.

  • Moderators

For hunters, I'd lean on the spot list plus a logger that can pull in or at least display park references. Then focus on being a clean caller: send your call once or twice, listen, and don't talk over the activator. If they're clearly running a net-style pileup, listening first will tell you whether they want a full call, suffix only, or something else.

One thing I'd add for the two-fer question: if you work an activator in a multi-park location, your hunter log may need each reference entered or recognized properly. Check how your software handles multiple references. Misformatted ADIF fields are a common cause of missing credit, so compare your export against the current POTA logging instructions.

Also, park-to-park contacts are a nice target because both stations can benefit. They're worth chasing if you're activating and have spare time between calls, but they shouldn't distract you from hitting your 10 QSOs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.