Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Choosing a handheld: FT-65R vs. D-STAR/DMR HTs, plus batteries, antennas, CHIRP and repeater offsets

ci_cover.jpg

I want to collect some practical advice on picking a handheld, since the same questions come up constantly. The range runs from a cheap Baofeng to a Yaesu FT-65R to the digital-capable Icom ID-52A and Kenwood TH-D75, and the Icom IC-705 gets lumped in too even though it isn't a handheld in the usual sense.

Rough categories

  • Budget analog dual-banders (Baofeng UV-5R family and similar): 2 m/70 cm FM, around 5 W, supported by CHIRP, and cheap enough to keep a spare in a go-bag. The usual trade-offs are a wide-open receiver front end that overloads near strong transmitters, weaker spurious suppression, and menus that take some learning.
  • Name-brand analog dual-banders (Yaesu FT-65R): still FM-only with no GPS or digital modes, but generally a more predictable receiver and a simpler interface. A reasonable choice for a first radio you plan to use on repeaters and simplex.
  • D-STAR handhelds (Icom ID-52A, Kenwood TH-D75): both do analog FM and D-STAR digital voice and include GPS. The TH-D75 adds 220 MHz (1.25 m) and built-in APRS features. Both are far more capable than a basic HT and have a steeper learning curve and a higher price. D-STAR is only useful if there are D-STAR repeaters or reflectors you can reach.
  • DMR handhelds: a separate ecosystem. You need a DMR ID, a codeplug with the right color codes, time slots and talkgroups, and a nearby DMR repeater or hotspot. Check local DMR activity before buying.
  • Icom IC-705: a portable HF/VHF/UHF all-mode transceiver with D-STAR. It's great for portable HF and SOTA/POTA-style operation, but it's larger and more expensive than an HT and not a pocket radio. Don't compare it directly to an FT-65R.

Batteries. Most HTs use proprietary Li-ion packs, so a spare charged pack is the most useful accessory. Think about how you'll recharge during a long outage: a 12 V DC cable or battery eliminator, a USB-charging option if your model supports it, or a small solar or power-bank setup. Check the pack's voltage and connector before buying third-party chargers.

Antennas. The stock rubber duck is a compromise. A longer replacement like the Nagoya NA-771 style whips often helps, and a roll-up J-pole or a 1/4-wave on a ground plane helps more for the same radio. Check the connector gender first (SMA-female vs. SMA-male, or BNC on some radios), because a surprising number of antennas get ordered in the wrong gender. An antenna analyzer or SWR meter is worth having to check your gear.

Programming. CHIRP handles many analog radios and saves a lot of keypad work, but always confirm your exact model on the current CHIRP supported-radio list. For DMR and some D-STAR features you will typically use the manufacturer's software (for example Icom's CS-series programs or Kenwood's tools) instead. Download the radio's current image before editing anything, and save a backup.

Repeater offsets. In the US the common conventions are 2 m: ±600 kHz, 70 cm: ±5 MHz, and 1.25 m: −1.6 MHz. Regions differ, so use a current repeater directory and your local band plan. For each repeater you will also need the CTCSS/PL tone, and often only the transmit tone is required. Use the reverse (REV) function to listen on the repeater input and see whether you can hear a station directly. If you can, simplex is an option.

Emergency use. You need a license for amateur bands, and a radio is only part of a plan. Program local repeaters, simplex frequencies and any ARES/RACES or club net frequencies ahead of time, and practice with them in regular nets. Don't transmit on public safety or other frequencies you're not authorized to use. Keep a printed copy of your channel list in case the radio fails.

What would you recommend for a first handheld, and what features are worth paying more for?

  • Replies 2
  • Views 35
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first radio I'd lean toward an analog dual-bander over something digital. FM on 2 m and 70 cm covers the most ground for the money: repeaters, simplex, nets and most emergency groups. Digital modes are fun, but they add a code-plug, IDs and network dependencies before you've learned basic repeater operation.

One thing I'd add to the budget-radio discussion is the receiver. Baofeng-type radios are very popular and CHIRP-friendly, but they can overload in strong RF environments, such as near a repeater site or a high-power transmitter. If you plan to use it in a city, or at a club event with several radios around, an FT-65R or similar may be less frustrating. If money is tight, buy two cheap radios and a decent antenna, which is often a better use of funds than one expensive radio.

On programming, CHIRP is a great starting point because you can see everything on one screen. Just make sure the cable is good, since a poor USB cable is a common cause of failed uploads. Keep your CSV of channels so you can move to a new radio later.

  • Moderators

For the digital side, the decision mostly depends on what's active in your area. D-STAR helps if there are local D-STAR repeaters or you regularly use reflectors. DMR may be better if your area has a lot of DMR repeaters or a club hotspot. Look up the repeaters on a directory first, because a feature-rich radio that you can't use locally is an expensive paperweight.

The ID-52A and TH-D75 are strong radios if you want the extras, such as GPS and Bluetooth, and APRS on the Kenwood, but they involve more setup than an FT-65R. Expect to spend time learning menus, callsign routing, and how your repeater handles DV traffic. For simple local calling, the analog FM modes on those radios work like any other HT.

I'd also keep the IC-705 separate from the HT conversation. It's a different tool for portable HF. If you want a go-bag for emergencies, an HT with an upgraded antenna and a spare battery is where most people should start. If you want to work HF from a park or a hilltop, then the IC-705 makes sense, together with the antenna and power source that HF needs.

And practice: set up a few memories for local repeaters and simplex, turn off the radio for a day, then see if you can still operate it from the manual and your own notes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.