Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Technician to General: how to study for Element 3 and what actually changes on HF

ci_cover.jpg

I'm planning to upgrade from Technician to General and want to build a realistic study plan. I know Element 3 is 35 questions, but I'm unsure how to split my time across the topics. Those are HF bands and sub-bands, propagation, antennas and feed lines, electrical principles, digital modes, operating practices, and the rules.

I'd also like to know what privileges I gain beyond the Technician HF slices, and whether it makes sense to think about a vanity call right away or wait. If you've seen a study order that works well, please share it. Memorizing the pool versus understanding the material is a question I'd like opinions on, too.

  • Replies 2
  • Views 23
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Element 3 is 35 questions drawn from the General pool, and 26 correct is a pass (74%). Check the pool's effective dates before buying a book or loading an app. Pools are replaced on a multi-year cycle, and you want material that matches the one your VE session will use.

On privileges, a Technician already has limited HF: CW on 80, 40 and 15 meters, and CW plus data on 10 meters. There is also phone on a segment of 10 meters. General opens up much larger pieces of 80, 40, 20 and 15 meters for phone and digital, plus all of 160, 17, 12 and 10 meters. You also get 30 meters, which is CW and data only with a 200 W PEP limit. The 60 meter allocation has its own special rules, so read the current FCC text for it instead of trusting a table from memory.

The exam does ask about sub-band edges, so a chart on the wall helps. A useful pattern is that CW/data sections sit at the bottom of the bands and phone sits near the top. Also learn the exceptions, such as 30 meters being no-phone, and that 10 meters is wide open to General. Learn the band plan conventions separately from the legal limits. Something like where FT8 tends to sit is custom, not regulation.

For the technical sections, propagation and antennas are where the memorization-only approach breaks down. Know why the D layer absorbs lower frequencies during the day, why 80 and 40 meters open up at night, and what MUF, LUF and critical frequency mean. Know how solar flux and the K and A indices relate to conditions. For antennas, be comfortable with half-wave dipole length (about 468 divided by frequency in MHz, giving feet), quarter-wave verticals with radials, and how SWR, feed line loss and impedance matching relate. If you understand the logic, many questions become easy eliminations.

  • Moderators

Here's a study order that fits most people moving up from Technician. Start with the rules and operating practices chapters, since they overlap with what you already know and build confidence quickly. Then do band privileges and emissions. Save electrical principles and propagation for the middle, when you're warmed up. Leave digital modes and the odds and ends for last. A four to six week schedule of short daily sessions beats cramming, especially if you're also working through the math.

For the electrical section, the General pool leans on Ohm's law, power calculations, decibels, and basic filter and circuit behavior. Remember the dB anchors: 3 dB is about double the power, 10 dB is ten times, and 6 dB is a quarter-wave step in voltage terms. Anchors like these let you do the arithmetic in your head. Know the difference between PEP and average power, since power limits are written in PEP. Practice working each formula in both directions, since the exam will present the unknown in different positions.

For digital modes, learn the categories more than the software: what FT8 timing requires (accurate computer clock sync), how PSK31 and RTTY differ, what Winlink does (email over radio), and the difference between baud rate and bandwidth. Most questions are conceptual.

Take practice exams in timed mode and review every miss by reading the explanation, not just the correct letter. When you're consistently scoring in the mid-80s or better, you have a margin over the 26-correct line. Plan for the real session by bringing ID and your FRN, and expect the VE team to handle the paperwork.

On vanity calls, you keep your current call when you upgrade, and nothing forces a change. Vanity is optional and carries an application fee, so check the FCC's current rules before applying. General operators can generally pick from the sequential-format groups that Technicians can, so upgrading doesn't change much about vanity eligibility. If you want a shorter or more memorable call, you can do it any time after you hold a license. There's no need to rush it around the exam.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.