ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
EME by band: what 2 m, 70 cm, 23 cm and 10 GHz moonbounce actually demand from a station
This thread is meant to line up what each band asks of an EME station, so the trade-offs between Yagi arrays, dishes, preamps and modes are visible side by side. All numbers below are round figures for planning, not exact specs.
Start with path loss, since everything else follows from it. The round-trip loss to the Moon and back is roughly 250 dB on 144 MHz. It rises by about 9.5 dB each time the frequency triples, so it is around 260 dB on 432 MHz and around 270 dB on 1296 MHz. The Moon's distance also varies by about 2 dB in path loss between perigee and apogee. The loss gets worse with frequency, but a fixed physical aperture gains 20 log(f) in gain, so a dish or array of constant size wins back more than it loses. That is why dish stations on 23 cm and up can be much smaller physically than a serious 2 m array.
On 2 m, the common entry point is an array of several long-boom Yagis, a legal-limit amplifier, a masthead preamp and low-loss hardline. Each doubling of the aperture adds a little under 3 dB in practice. Sky noise is high here, especially when the Moon is near the galactic plane, so a very low preamp noise figure helps but does not rescue a noisy sky or a noisy local environment. JT65A or Q65-60A is the usual digital choice, and WSJT-X's Astronomical Data window shows Doppler, sky temperature and a degradation estimate that help you pick better times. 2 m is also where Faraday rotation hurts most. The polarization of the returned signal can drift through full nulls over minutes to hours. Arrays that can switch or rotate polarization, or a setup that receives two polarizations at once, make a large difference. MAP65 is designed around that kind of dual-polarization receiving.
On 70 cm the options are a bigger Yagi array (often 4 to 8 or more antennas) or a dish of a few metres. Faraday rotation falls as 1/f², so it is roughly nine times smaller than on 2 m and often slow enough to track. JT65B or a Q65-60B style submode is typical, because the wider tone spacing copes with more Doppler spread. Feedline loss and relay loss start to matter more than on 2 m, because the preamp has to sit at the antenna and every tenth of a dB ahead of it counts.
On 23 cm a dish of about 3 m is a common benchmark. With roughly 55 percent efficiency its gain works out to about 29 to 30 dBi, and the beamwidth is around 5 degrees. Faraday rotation is small enough to ignore for most purposes, but there is still a spatial polarization offset between two stations on a linear feed, because their local horizons do not line up with the Moon. Many dish stations use circular feeds. The reflection reverses handedness, so stations agree on a convention and transmit one sense while receiving the opposite. Libration fading is much more obvious here, with fast flutter that spreads the signal in Doppler and scales with frequency. That is why JT65C or wider Q65 submodes appear on this band.
On 10 GHz a 3 m dish has a gain near 47 dBi, but the beamwidth is only about 0.7 degrees, barely bigger than the 0.5-degree Moon. That makes pointing, tracking accuracy and mechanical stiffness the main project. Many stations calibrate against sun noise and Moon noise before trusting their system sensitivity. Doppler spread from libration is large, so the widest submodes are used and decoding leans heavily on good timing.
Two things apply on every band. The Moon's declination cycles through a month, and a Moon that is high in your hemisphere stays up longer, so mutual visibility with a distant partner shrinks and grows over that cycle. And low elevation adds ground noise and obstructions.
Questions for the thread: where do you draw the line between a station that can work big stations and one that can work other small stations? Which of Faraday, libration and spatial polarization do you find hardest to diagnose? And how do you plan skeds when your Moon window and your partner's barely overlap?
This thread is meant to line up what each band asks of an EME station, so the trade-offs between Yagi arrays, dishes, preamps and modes are visible side by side. All numbers below are round figures for planning, not exact specs.
Start with path loss, since everything else follows from it. The round-trip loss to the Moon and back is roughly 250 dB on 144 MHz. It rises by about 9.5 dB each time the frequency triples, so it is around 260 dB on 432 MHz and around 270 dB on 1296 MHz. The Moon's distance also varies by about 2 dB in path loss between perigee and apogee. The loss gets worse with frequency, but a fixed physical aperture gains 20 log(f) in gain, so a dish or array of constant size wins back more than it loses. That is why dish stations on 23 cm and up can be much smaller physically than a serious 2 m array.
On 2 m, the common entry point is an array of several long-boom Yagis, a legal-limit amplifier, a masthead preamp and low-loss hardline. Each doubling of the aperture adds a little under 3 dB in practice. Sky noise is high here, especially when the Moon is near the galactic plane, so a very low preamp noise figure helps but does not rescue a noisy sky or a noisy local environment. JT65A or Q65-60A is the usual digital choice, and WSJT-X's Astronomical Data window shows Doppler, sky temperature and a degradation estimate that help you pick better times. 2 m is also where Faraday rotation hurts most. The polarization of the returned signal can drift through full nulls over minutes to hours. Arrays that can switch or rotate polarization, or a setup that receives two polarizations at once, make a large difference. MAP65 is designed around that kind of dual-polarization receiving.
On 70 cm the options are a bigger Yagi array (often 4 to 8 or more antennas) or a dish of a few metres. Faraday rotation falls as 1/f², so it is roughly nine times smaller than on 2 m and often slow enough to track. JT65B or a Q65-60B style submode is typical, because the wider tone spacing copes with more Doppler spread. Feedline loss and relay loss start to matter more than on 2 m, because the preamp has to sit at the antenna and every tenth of a dB ahead of it counts.
On 23 cm a dish of about 3 m is a common benchmark. With roughly 55 percent efficiency its gain works out to about 29 to 30 dBi, and the beamwidth is around 5 degrees. Faraday rotation is small enough to ignore for most purposes, but there is still a spatial polarization offset between two stations on a linear feed, because their local horizons do not line up with the Moon. Many dish stations use circular feeds. The reflection reverses handedness, so stations agree on a convention and transmit one sense while receiving the opposite. Libration fading is much more obvious here, with fast flutter that spreads the signal in Doppler and scales with frequency. That is why JT65C or wider Q65 submodes appear on this band.
On 10 GHz a 3 m dish has a gain near 47 dBi, but the beamwidth is only about 0.7 degrees, barely bigger than the 0.5-degree Moon. That makes pointing, tracking accuracy and mechanical stiffness the main project. Many stations calibrate against sun noise and Moon noise before trusting their system sensitivity. Doppler spread from libration is large, so the widest submodes are used and decoding leans heavily on good timing.
Two things apply on every band. The Moon's declination cycles through a month, and a Moon that is high in your hemisphere stays up longer, so mutual visibility with a distant partner shrinks and grows over that cycle. And low elevation adds ground noise and obstructions.
Questions for the thread: where do you draw the line between a station that can work big stations and one that can work other small stations? Which of Faraday, libration and spatial polarization do you find hardest to diagnose? And how do you plan skeds when your Moon window and your partner's barely overlap?
Link to comment
https://www.hamradiobase.com/forums/topic/11641-eme-by-band-what-2-m-70-cm-23-cm-and-10-ghz-moonbounce-actually-demand-from-a-station/Share on other sites