Newly licensed? Share your first QSO, your first radio, and what you'd tell the next new ham
- Replies 2
- Views 19
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Dan 1 post
-
Mod_Chrissy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
New hams show up here all the time, and the same questions keep coming up: What should I buy first? How do I get on a repeater without freezing up? Is HF realistic with a Technician license? Do I really need to go to a club meeting? This thread is a place to collect those answers in one spot.
If you're new, introduce yourself. A few things that help people give useful advice:
If you've been licensed a while, tell us about your first repeater contact, your first HF QSO, or your first contest. Mistakes are welcome too, since those are often the most useful part. Also tell us who your Elmer was, or what you wish someone had told you in the first month.
To get things started, here are a few common first-steps topics that tend to come up:
First radio. A handheld (HT) is the usual starting point because it's cheap and works on local repeaters right away. Budget HTs can work fine for learning, but they can be fussy about programming and receiver quality. Check whether your club or a nearby ham already uses a particular model, because that makes it much easier to get programming help. Software like CHIRP and a database like RepeaterBook can save a lot of typing, but verify the frequency, offset, and CTCSS/PL tone against the repeater owner's or club's information.
First repeater contact. Listen first. Learn whether the repeater needs a tone, what its offset is, and whether there's a net or a regular group that uses it. A simple, normal way to join in is to say your callsign and that you're listening, or to call someone you've heard by their callsign. You don't need to say "CQ" on a repeater. If you're nervous, say so. Most operators are glad to help a new licensee.
First HF. HF has more variables: band conditions, antenna, power, time of day, and the operating habits of each mode. A well-placed simple antenna often matters more than a bigger radio. Before transmitting, know your privileges and band edges, and use a dummy load or an antenna analyzer to check things on the bench instead of trial and error on the air.
First contest. You don't have to be competitive. Many contests are a good way to practice copying callsigns and exchanges at speed. Club Field Day events are a friendly entry point because there are usually experienced operators around to show you how things work.
So what's your story? What was your first radio, what did you wish you'd bought differently, and what's the best advice you were given?
Link to comment
https://www.hamradiobase.com/forums/topic/11663-newly-licensed-share-your-first-qso-your-first-radio-and-what-youd-tell-the-next-new-ham/Share on other sites