Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Building a 5 W portable QRP setup: rig choice, antenna, and battery trade-offs

ci_cover.jpg

I'm planning a light portable QRP kit for park and summit-style operating and want to compare notes on the choices. These are the questions I'm trying to settle.

Rig. The options seem to fall into three groups. The first is full-featured portables like the Elecraft KX2 and KX3, which cover CW, SSB and digital modes and have built-in keyers and optional ATUs. The second is minimalist CW-only transceivers like the Mountain Topper series and the Penntek TR-35, which are small and light and draw little current. The third is kit-and-build territory: Hendricks-style QRP kits, and the Pixie, a very simple CW transceiver that is cheap and educational but has a wide-open receiver. If the goal is mainly working people rather than building, where does each group make sense? If SSB matters, is the extra weight and current of a KX-class rig worth it, given that 10 W PEP on SSB is the usual QRP limit?

Antenna. A common line is that the antenna matters more than the rig at 5 W. Going from 5 W to 100 W is roughly 13 dB, so a good antenna recovers a lot of what low power gives up. For a no-tuner setup, I'm weighing a resonant wire dipole or inverted-V against an end-fed half-wave with a 49:1 transformer. Are there tips for keeping feedline loss and common-mode current under control with the end-fed?

Power. LiFePO4 looks attractive because of its flat discharge curve and light weight. A 4-cell pack is about 12.8 V nominal and about 14.4 to 14.6 V fully charged. Before connecting one, check that your rig's maximum input voltage and low-voltage cutoff behavior suit that range.

Operating. Where do you usually hang out? Common QRP CW watering holes are around 7.030, 10.106, 14.060, 21.060 and 28.060 MHz. SSB QRP activity is often found around 7.285, 14.285 and 21.385 MHz. I'd check your local band plan before relying on those. Does QRP-ARCI activity or contest participation help much for finding contacts, or is spotting and calling CQ better?

  • Replies 2
  • Views 18
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'd decide CW versus SSB first, because it determines almost everything else. If you're comfortable with CW, a small CW-only rig makes a lot of sense: very low receive current, easy to pack, and a 5 W CW signal is much more readable than a 5 W SSB signal in the same noise. The Mountain Topper and TR-35 class of rigs are built around that idea. If you want SSB, a KX2 or KX3 is more flexible, but expect a bigger bag and a bigger power budget.

On the kit side, a Pixie is better treated as a learning project than as a main field rig. The very wide receive passband means you hear everything in the neighborhood at once, so it's hard to copy anything on a busy band. A better-filtered kit gives more satisfaction for the same build time.

On the antenna, a resonant dipole or inverted-V on one band is hard to beat for simplicity. Cut it a little long and trim it, and you won't need a tuner at all, which saves weight and loss. An end-fed is more convenient for one-person setup, but the transformer, counterpoise and feedline length all affect performance, so expect to experiment a bit.

  • Moderators

On batteries: LiFePO4 is a good match for 12 V portable gear, but check the voltage range against your rig's specs. A 4-cell pack runs a bit above 13 V under normal use and higher when freshly charged, which is fine for many 12-14 V rigs but not for something with a narrow input window. Know what the pack's built-in protection does when it hits the low-voltage cutoff, because some cut off abruptly in mid-QSO. A small inline fuse and a clearly marked connector polarity are cheap insurance.

For capacity, don't oversize. A 5 W CW session at modest duty cycle draws well under what an SSB rig at 10 W PEP does, so a small pack goes a long way. The KX-series internal battery options are convenient but give you fewer hours than an external pack.

On finding contacts: calling frequencies are a starting point, not a guarantee. Self-spotting through the usual spotting networks for park and summit activations, and answering other QRP stations, tend to work better than sitting on 14.060 and hoping. QRP-ARCI also runs operating events and has information on awards, which can give you a reason for people to be on the air. Check their current rules and calendar directly before planning around any specific event.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.