Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Studying for the Amateur Extra (Element 4): what to focus on beyond memorizing the pool?

ci_cover.jpg

I'm putting together a study plan for the Amateur Extra exam, Element 4, and want to hear how others split their time. The basics as I understand them: 50 questions, 37 correct to pass, and you need Technician and General credit first. Passing gets you every amateur allocation, including the Extra-only segments at the bottom of 80, 40, 20 and 15 meters, plus eligibility for the Group A call signs.

The pool covers a wide range: Part 97 rules, operating practices, propagation, transistor and op amp circuits, filters, oscillators, modulation, digital modes, transmission lines, the Smith chart, and antenna theory. Some of it is plain recall, such as rules and definitions. Other parts need real calculation or at least a mental picture of what a circuit is doing.

Which topics are worth truly understanding, and which are fine to learn as patterns? Does anyone have a good way to make the Smith chart and the op amp questions stick? Please also say how you'd handle the FCC rules section, since that's the part the pool is most likely to change.

  • Replies 2
  • Views 21
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'd treat it in three buckets. Rules and definitions (Part 97, operating procedures, safety) are recall, so use spaced repetition on them. Calculation questions are the second bucket. They look intimidating, but they reuse a small set of formulas. The third bucket is the concepts that make many questions easy once you see the idea.

A few formulas cover a lot of ground:

Inverting op amp gain is -Rf/Rin. Non-inverting gain is 1 + Rf/Rin. With a 100 k feedback resistor and a 10 k input resistor, that's -10 or 11 respectively. Resonance is f = 1/(2π√LC). Q for a resonant circuit is center frequency divided by bandwidth, so a 7.1 MHz filter with 100 kHz bandwidth has a Q of about 71. FM modulation index is deviation divided by modulating frequency, and a rough bandwidth estimate is Carson's rule, 2 × (deviation + highest modulating frequency). A 5 kHz deviation with a 3 kHz tone gives an index of about 1.67 and roughly 16 kHz of bandwidth.

For oscillators, remember the Barkhausen idea: loop gain of at least one, with total phase shift of 0 or a multiple of 360 degrees. That one idea answers a surprising number of questions.

For the rules section, memorize from a current pool. The question pool is revised on a multi-year cycle by the volunteer examiner coordinators' committee, and Part 97 itself can be amended. Check the effective dates for whatever study material you're using, and look at the pool's own list of changes if you studied from an older book.

  • Moderators

For the Smith chart, I wouldn't try to learn it as a picture. Learn what the landmarks mean. The center is the matched condition, normalized impedance 1 + j0, which has zero reflection. The horizontal axis is pure resistance. The top half is inductive and the bottom half is capacitive. Moving toward the generator is clockwise, and one full trip around the chart is a half wavelength of line.

A worked example helps. Take a 50 Ω line with a 100 Ω resistive load. Reflection coefficient is (100 − 50)/(100 + 50) = 1/3. SWR is (1 + 1/3)/(1 − 1/3) = 2. On the chart, the normalized load is 2 + j0, sitting on the right side of the horizontal axis. The SWR circle passes through that point, and a half wavelength of line brings you back to the same impedance.

Related questions use the same logic. A quarter-wave section transforms impedance by Z = √(Z1 × Z2), so matching 50 Ω to 100 Ω takes a section of about 70.7 Ω. A quarter wave of line also inverts the load, so a short becomes an open and vice versa.

For antennas, keep the reference points straight. dBi is relative to an isotropic radiator, and dBd is relative to a dipole. The two differ by about 2.15 dB. Many of the gain and effective radiated power questions come down to getting that conversion right.

If you're allowed a calculator in the exam room, confirm that with your VE team beforehand. Rules on what's permitted can vary by team.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.