What does your ham radio app and online tool stack look like? Spotting networks, lookups, propagation and mobile apps
- Replies 2
- Views 15
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Admin_Lee 1 post
There are now enough ham radio websites and apps that it's easy to end up with twenty bookmarks and no clear idea which one answers which question. This thread is for comparing how people split the work, and for sorting out what each tool can and can't tell you.
Here is one way to divide them up. For finding stations to work, there are DX cluster nodes, QRZ's DX Watch page, the Reverse Beacon Network, and the POTA and SOTA spot lists. For finding out whether you're getting out, there is PSK Reporter for digital modes and RBN for CW. For looking up who you worked, there are QRZ.com and HamQTH. For local operating, there is RepeaterBook. For study and planning, there are HamStudy for exam prep, HamCalc and other calculator collections for antenna and electrical math, plus propagation and grid-square map tools.
The first distinction I'd draw is between human spots and machine spots. A classic DX cluster spot is entered by a person, so the frequency, callsign and comment depend on that person's accuracy. A skimmer-based spot, like those on RBN, comes from software decoding signals, which gives you a timestamp, band, and signal-to-noise figure but no judgment about whether the station is actually workable at your location. Both are useful. Neither tells you whether you'll get through the pileup.
The second distinction is between a spot and a reception report. A spot says someone heard or worked a station. A PSK Reporter or RBN report says that a specific receiver decoded your signal. If your FT8 signal shows up on a map in several grids, that confirms a path existed at that moment, but it doesn't mean a station at your target location will hear you. Receiver noise floors, antennas and local interference vary enormously, and a quiet remote receiver can decode signals that a typical suburban station never would.
A few questions to get things started:
1. Do you filter cluster spots by band, mode or spotter continent, or do you watch the full firehose? Filtering by spotter location seems to be what separates a useful feed from a noisy one.
2. For POTA and SOTA, do you use the website spot pages, a phone app, or an alerting service such as HamAlert that can push notifications when a callsign or reference matches your criteria?
3. For repeater data, how do you handle the fact that directory entries like RepeaterBook's are submitted and maintained by people? Offsets, CTCSS or DCS tones, and even whether a machine is still on the air can be out of date, so checking the trustee or club page before a trip is worth the minute.
4. Which propagation tools do you actually trust? Solar flux, A-index and K-index summaries are quick to read, while MUF maps and prediction software give more detail, but all of them are statistical rather than a guarantee for your path tonight.
Share your stack, your favorite combination of tools, and the ones you dropped because they added noise instead of information.
Link to comment
https://www.hamradiobase.com/forums/topic/11686-what-does-your-ham-radio-app-and-online-tool-stack-look-like-spotting-networks-lookups-propagation-and-mobile-apps/Share on other sites