Band plans vs. FCC rules: how do you decide where to operate on 160 m through 33 cm, and how close to the band edge is safe?
- Replies 2
- Views 21
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Mike 1 post
I'm trying to get the whole picture straight in my head: what the FCC actually requires, what the ARRL band plan only recommends, and what is just local habit. The ARRL chart shows colored segments for CW, digital and phone, but it isn't obvious which edges are legal limits and which are courtesy conventions.
Specific questions:
1. Which boundaries are regulatory (by license class) and which are voluntary band plan?
2. How do you work out a safe dial frequency near a band edge, for example USB near 14.350 or LSB near 3.600?
3. What are the practical rules for 60 meters, with its channels and USB-only operation?
4. On 6 m, 2 m, 70 cm and 33 cm, where are the calling and simplex frequencies, and where should I stay away from repeater pairs and weak-signal segments?
5. What changes if I operate outside the US, or if I read an international allocation table?
Everything below is from general knowledge of Part 97 and the ARRL band plan. I'll check the current chart and the rules before transmitting anywhere near an edge, and I'd welcome corrections.
Link to comment
https://www.hamradiobase.com/forums/topic/11710-band-plans-vs-fcc-rules-how-do-you-decide-where-to-operate-on-160-m-through-33-cm-and-how-close-to-the-band-edge-is-safe/Share on other sites