Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.5
Wind 385.0 km/s
Aurora 1
Updated 13:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Choosing a handheld: Baofeng/FT-65R vs. D-STAR and DMR HTs, plus antennas, batteries, CHIRP and emergency use

ci_cover.jpg

I'd like to sort out how people choose a handheld these days, since the range now runs from very cheap analog dual-banders to radios with GPS, Bluetooth and digital voice. Here are the categories as I understand them. Corrections are welcome.

Basic analog dual-band. The Baofeng UV-5R family and the Yaesu FT-65R belong here. Both are VHF/UHF FM radios with roughly 5 W output and no digital modes. The cost difference is real, but so is the difference in receiver quality, filtering and transmit cleanliness. The FT-65R is generally regarded as having a more robust receiver than the cheapest imports, which matters near strong pagers, commercial transmitters or other hams on the same tower.

D-STAR handhelds. The Icom ID-52A and the Kenwood TH-D75 both handle D-STAR as well as analog FM, and both include GPS. The TH-D75 adds 220 MHz in North American versions and built-in APRS. The IC-705 is often mentioned in the same breath, but it is a portable HF/VHF/UHF base-style transceiver, not a handie-talkie. It is great for portable HF, but you wouldn't clip it to a belt. D-STAR is only useful where there are active repeaters or hotspots, so check your local coverage first.

DMR handhelds. DMR radios usually come from other makers. They need a registered DMR ID, a color code, a time slot and talkgroups that match the repeater. Programming is much more involved than analog, and the codeplug is half the battle.

A few questions for the group:

  1. If someone wants one HT for local repeaters, simplex and emergency communications, is an analog dual-bander enough, or does digital make it worth the extra cost?
  2. What's the best way to handle batteries? Spare Li-ion packs, an AA-cell case, or a USB charging option?
  3. Which antenna upgrades make the biggest difference: a better whip, a roll-up J-pole or a magnetic-mount antenna on a vehicle?
  4. What are the common repeater-offset and tone pitfalls when you program from CHIRP?

Please keep advice to the legal side. Many cheap radios can transmit outside amateur bands, and only your license and local rules decide where you can transmit.

  • Replies 2
  • Views 13
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

For most people starting out I'd lean toward the analog dual-bander first. Repeaters, simplex and most local nets are still FM, and a dual-bander covers all of that. Digital modes are fun, but they add programming overhead and depend on infrastructure that varies a lot from place to place. Look at what your local repeaters actually carry before paying for D-STAR or DMR.

On the antenna question, the stock rubber duck is usually the weakest link in the system. A tuned replacement such as a Nagoya-style whip, or a roll-up J-pole hung from a tree or window frame, often helps more than another radio. For vehicle use, a magnetic-mount quarter-wave on the roof is a big step up from holding the HT inside the cab. Whatever you buy, check the connector: many HTs use SMA-female on the radio, but some use SMA-male, so don't assume the antenna will fit.

For batteries, carry a spare charged pack and know the radio's real runtime. Transmit time, screen backlight, GPS and Bluetooth all draw current. An AA-cell tray, where the model offers one, is a reasonable fallback if you lose power for days, but it's usually lower-powered and more awkward than a proper Li-ion pack.

  • Moderators

CHIRP is the practical answer for programming, but check the supported-models list for your exact radio and firmware before buying a cable. Cheap cables with poor chipsets and driver problems cause a lot of failed reads, so use a recommended cable. The main habit to get into is to download the current configuration from the radio first and save it as a backup before you write anything.

For offsets, don't trust a generic memory. In the US the usual 2 m offset is 600 kHz and the usual 70 cm offset is 5 MHz, but the sign (+ or -) varies by region and by band plan, and other countries use different values. A repeater listing, such as a local coordinating body's database, will usually give you the input and output frequencies and the CTCSS tone required. If the repeater needs a tone to access it, enter it as the transmit tone, and keep tone squelch off unless you actually want it.

For emergency use, build a short, well-organized channel list rather than a huge one: local repeaters, a few simplex frequencies, the weather channels, and any agreed net frequencies for your group. Practice simplex before you need it, because repeaters can go down when power or links fail. Knowing your radio's menu without looking at the manual is worth more than any extra feature.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.