Getting from 5 to 20 WPM: plateaus, head copy, callsign drills and when to go on the air
- Replies 2
- Views 14
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Mike 1 post
-
Mod_Chrissy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Opening a thread on the 5-to-20 WPM climb, because the advice on it often contradicts itself. The trouble is that the skill changes along the way. What works at 5 WPM (learning the sounds) is not what works at 15 (copying words and phrases), and it stops working just when you need something new.
Here is a rough framework to argue with.
Sound, not dots and dashes. Start with characters sent at 18-20 WPM or faster, with extra space between them (Farnsworth spacing), or use a Koch-style trainer that adds characters one at a time at full speed. Counting dits and dahs builds a habit you will have to unlearn later. At 20 WPM a dit is 60 ms long (1200 ÷ WPM, in milliseconds), and nobody can count at that rate. You have to hear "di-dah" as a single sound, the way you hear a word.
The plateaus. Many learners stall somewhere in the low-to-mid teens. At that speed you can no longer process each letter separately, and you haven't yet learned to hear common words and letter groups as units. The usual fix is to stop pushing the speed and change what you practice: common words (THE, AND, YOU, FOR, WITH), common prefixes and endings (-ING, -ED, -TION), and callsign patterns. Another approach is to practice a little above your comfortable speed, where you miss characters and are forced to move on, then drop back to a speed where you get nearly everything.
Head copy. Writing every letter is a good way to learn, but it limits your speed because the pencil becomes the bottleneck. Try the switch when you can copy about 90% at a given speed on paper. Start with short, predictable material like callsigns, RST reports and names, then widen the material. Expect your accuracy to drop at first. Most people let the sound run a few characters ahead of the part they are actively thinking about, and stay relaxed when they miss a letter instead of dwelling on it.
Drills that target specific weaknesses. Random five-character groups are fine for learning characters. For on-air use, callsign drills (RufzXP is popular for this) and a contest simulator like Morse Runner train the exact things that matter: picking a call out of noise, handling numbers and portable/slash designators, and sending quickly in response. Practice the numerals as well, since they get less attention than letters and show up in every exchange.
Sending. A straight key is fine at the start, but past about 15 WPM many people move to paddles. Common settings to compare are iambic mode A vs. B (which affects whether you get an extra element when you release the paddles), a dah-to-dit weight near the default 3:1, and paddle contact spacing and tension that you can adjust until it feels easy. The usual rule is to set the keyer speed to what you can send cleanly, not what you can copy. Poor spacing between letters and words sounds worse on the air than a slightly slower speed.
Schedule. Short, frequent sessions generally beat long, rare ones. Twenty to thirty minutes a day is a typical target, split between a structured drill (new characters or callsigns) and something closer to real operating (listening to actual QSOs, a practice file, or a net). A fixed time of day makes it easier to keep up.
Software vs. ear. Decoders like fldigi and CW Skimmer are very useful for checking what you thought you heard, and for finding stations on a busy band. On a good, clean signal sent by a machine they do well. On a noisy band, with QSB or a hand-sent fist with uneven spacing, they often make errors a person would not. The risk is relying on the screen and never developing your own copy, so many people use software to confirm after trying to copy by ear first.
Questions for the thread: at what point did you move from a trainer to live QSOs, and how much did it help? Do slow CW nets work for building speed, or do they add pressure before you are ready? And if you are in the teens and stuck, what changed your plateau, whether that was a different drill, a different tool, or just time?
Link to comment
https://www.hamradiobase.com/forums/topic/11726-getting-from-5-to-20-wpm-plateaus-head-copy-callsign-drills-and-when-to-go-on-the-air/Share on other sites