ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
One field kit for SOTA, POTA and Field Day: where do you split the weight and complexity?
Lots of us end up with two or three separate field setups: an ultralight summit kit, a bigger park-from-the-car kit, and something heavier for Field Day. It's worth asking how much of it can be shared, because every duplicated piece of gear is something you can forget or leave uncharged.
Here's a framework to poke holes in. Treat the kit as four layers: antenna, support, power, and logging. Each layer has a lightweight and a comfortable version, and the trick is picking which layers get the weight on a given day.
Antenna. An end-fed half wave (EFHW) is the usual first choice because it's one wire, one matching unit, and no center support. The matching transformer is typically around 49:1 (some builders use 64:1), and the wire is resonant on its fundamental band plus harmonics. A 40 m version is roughly 20 m (about 66 ft) of wire and covers 40/20/15/10. The trade-off is that the matching unit and the feedline's behavior matter a lot: a coax run with no choke can radiate and give you odd SWR readings that change when you touch the cable. A linked dipole is more fiddly to set up (you're moving links or jumpers for each band), but it's a balanced, center-fed antenna with predictable behavior and no transformer losses to worry about. It also pairs well with a choke at the feedpoint.
Support. A 10 m (33 ft) telescopic fiberglass pole is the common workhorse. It's cheap, collapses small, and is enough for an inverted-L or a sloper-style EFHW. Keep an eye on the joints: lower sections tend to slip under load, so some operators use a hose clamp or tape at the collapsed joints. Guy the pole with at least one or two lines if there's any wind, and don't use a carbon pole near a wire antenna without thinking, because carbon fiber conducts and can detune or short things. Whatever the pole is made of, stay well clear of power lines when raising and lowering it.
Power. LiFePO4 is popular because it's light and holds near-constant voltage through most of the discharge. A 4S pack is about 12.8 V nominal and around 14.4 to 14.6 V fully charged, which sits inside what most 12 V rigs tolerate, but check your radio's rated input range. Two practical notes: a battery management system (BMS) may cut off abruptly under a big current draw at low state of charge, which looks like your rig dying mid-QSO, and most LiFePO4 cells shouldn't be charged below freezing unless the pack has low-temperature protection or heating. If you add a solar panel, run it through a proper charge controller rather than straight to the battery or the radio.
Logging. Whatever app you use on a phone, a paper backup in pencil on waterproof paper is cheap insurance against a dead screen or a cold-soaked battery. Log in UTC to avoid confusion about the date, and record the reference (summit or park) in a field you can export later. For POTA, a valid activation needs 10 contacts within a UTC day; for SOTA, it's 4 contacts to earn points. Both programs have specific rules about operating location, so read the current rules for the reference you're using.
Where I'd like opinions: if you could only carry one antenna to cover both a ridge and a park picnic table, which would it be, and what do you do about the feedline choke? And for people running a go-kit from one LiFePO4 pack, how big is big enough for a few hours of SSB at 20 to 50 W?
Lots of us end up with two or three separate field setups: an ultralight summit kit, a bigger park-from-the-car kit, and something heavier for Field Day. It's worth asking how much of it can be shared, because every duplicated piece of gear is something you can forget or leave uncharged.
Here's a framework to poke holes in. Treat the kit as four layers: antenna, support, power, and logging. Each layer has a lightweight and a comfortable version, and the trick is picking which layers get the weight on a given day.
Antenna. An end-fed half wave (EFHW) is the usual first choice because it's one wire, one matching unit, and no center support. The matching transformer is typically around 49:1 (some builders use 64:1), and the wire is resonant on its fundamental band plus harmonics. A 40 m version is roughly 20 m (about 66 ft) of wire and covers 40/20/15/10. The trade-off is that the matching unit and the feedline's behavior matter a lot: a coax run with no choke can radiate and give you odd SWR readings that change when you touch the cable. A linked dipole is more fiddly to set up (you're moving links or jumpers for each band), but it's a balanced, center-fed antenna with predictable behavior and no transformer losses to worry about. It also pairs well with a choke at the feedpoint.
Support. A 10 m (33 ft) telescopic fiberglass pole is the common workhorse. It's cheap, collapses small, and is enough for an inverted-L or a sloper-style EFHW. Keep an eye on the joints: lower sections tend to slip under load, so some operators use a hose clamp or tape at the collapsed joints. Guy the pole with at least one or two lines if there's any wind, and don't use a carbon pole near a wire antenna without thinking, because carbon fiber conducts and can detune or short things. Whatever the pole is made of, stay well clear of power lines when raising and lowering it.
Power. LiFePO4 is popular because it's light and holds near-constant voltage through most of the discharge. A 4S pack is about 12.8 V nominal and around 14.4 to 14.6 V fully charged, which sits inside what most 12 V rigs tolerate, but check your radio's rated input range. Two practical notes: a battery management system (BMS) may cut off abruptly under a big current draw at low state of charge, which looks like your rig dying mid-QSO, and most LiFePO4 cells shouldn't be charged below freezing unless the pack has low-temperature protection or heating. If you add a solar panel, run it through a proper charge controller rather than straight to the battery or the radio.
Logging. Whatever app you use on a phone, a paper backup in pencil on waterproof paper is cheap insurance against a dead screen or a cold-soaked battery. Log in UTC to avoid confusion about the date, and record the reference (summit or park) in a field you can export later. For POTA, a valid activation needs 10 contacts within a UTC day; for SOTA, it's 4 contacts to earn points. Both programs have specific rules about operating location, so read the current rules for the reference you're using.
Where I'd like opinions: if you could only carry one antenna to cover both a ridge and a park picnic table, which would it be, and what do you do about the feedline choke? And for people running a go-kit from one LiFePO4 pack, how big is big enough for a few hours of SSB at 20 to 50 W?
Link to comment
https://www.hamradiobase.com/forums/topic/11728-one-field-kit-for-sota-pota-and-field-day-where-do-you-split-the-weight-and-complexity/Share on other sites