Q codes and ham shorthand: what QRM, QRN, QRP, QSY, 73, K/KN, SK and RST mean, and where each is used
- Replies 2
- Views 15
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Dan 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Can we put together a plain-English reference for the shorthand heard on the bands and seen in logs? The same abbreviations show up on CW, on voice, in nets and on QSL cards, and they don't always mean exactly what newcomers expect. Here is a starting point, and please correct or add to it.
Q codes. These are three-letter codes beginning with Q, originally designed for radiotelegraph. Sent with a question mark they ask something, and sent without one they answer or state something. The ones heard most often in amateur radio:
QRM is interference from other stations, usually man-made signals on or near your frequency. QRN is natural noise such as static or lightning crashes. QRP means low power, and by common convention that is 5 watts or less on CW and 10 watts PEP or less on SSB. QRO means high power. QRT means stop sending, or in practice "I'm shutting down" or "I'm going off the air." QRZ? means "who is calling me?" and is used when you heard a partial call or a pileup answered you. QSL means "I acknowledge receipt", and it is also the name for a confirmation card. QSO is a two-way contact. QSY means change frequency. QTH is your location. QSB is fading signal strength. QRL? asks "is this frequency in use?", and sending QRL means "this frequency is busy."
A few more that come up: QRS (send slower), QRQ (send faster), QRX (stand by or wait), QRV (I'm ready), QRG (your exact frequency) and QTR (the time).
Call procedure. CQ is a general call to any station. You can add a qualifier, such as CQ DX, CQ TEST in a contest or CQ POTA in an activation. DE means "from." A typical CW call is CQ CQ CQ DE W1ABC W1ABC K. K means "over, go ahead, anyone," while KN means "go ahead, but only the station I named." SK marks the end of a contact, and it is also used in the phrase "silent key" for a ham who has died. Prosigns like AR (end of message), BK (break) and KN are sent as one run-together character.
Signing off. 73 means best regards and is the standard friendly sign-off. It's already plural in meaning, so "73s" is traditionally frowned on, though you will hear it. 88 means love and kisses, usually kept for a spouse, a close friend or a joking exchange, and it is not a general sign-off.
RST reports. R is readability (1 to 5), S is signal strength (1 to 9) and T is tone (1 to 9, CW only). So 599 is perfectly readable, very strong, with a clean tone. On phone you drop the tone and give only RS, for example "5 9." Contest operators often send 5NN, where N is a cut number for 9. Reports are frequently given generously, and many operators use them as a courtesy rather than a calibrated measurement.
Common CW shorthand. TNX or TKS (thanks), TU (thank you), FB (fine business, meaning good), OM (old man, a male operator), YL (young lady) and XYL (wife), UR (your), RIG, ANT, WX (weather), PSE (please), AGN (again), ES (and), HW? (how copy?), GM/GA/GE (good morning, afternoon, evening), HI (laughter), GL (good luck), CUL (see you later) and R (received).
Logs and nets. A basic log entry includes the date and time in UTC, the callsign, frequency or band, mode, RST sent and received, and often name and QTH. In nets, the net control station (NCS) directs traffic. Check-in is announcing your presence, a roll call is when NCS goes through a list of stations, and traffic means formal messages being passed. "Go ahead" and "standing by" are plain-language ways to pass or hold the turn, and "clear" means you are done and leaving the frequency.
Two questions to start with. Which of these Q codes are fine to say on voice, and which sound odd? And are there any that people routinely misuse?
Link to comment
https://www.hamradiobase.com/forums/topic/11752-q-codes-and-ham-shorthand-what-qrm-qrn-qrp-qsy-73-kkn-sk-and-rst-mean-and-where-each-is-used/Share on other sites