Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plan vs. FCC rules: where do I actually operate, and how close to the band edge is safe?

ci_cover.jpg

I'm trying to sort out how the ARRL band plan, the FCC privileges for each license class, and the international allocations fit together. Each source seems to say something slightly different about where to operate.

Specific questions:

1. Is the ARRL band plan a rule or a courtesy? If it's only a courtesy, what actually keeps phone, CW and digital from landing on top of each other on 160 through 10 meters?

2. How do I stay legal at a band edge with SSB? A dial reading at the edge isn't the same as where the signal sits.

3. What's the deal with 60 meters? It seems to work differently from every other HF band.

4. On 6 m, 2 m, 70 cm and 33 cm, which frequencies are the usual simplex calling spots, and where do weak-signal and FM activity normally sit?

5. If I travel or work DX, do the same band edges apply everywhere?

Corrections welcome if I've got any of this wrong.

  • Replies 2
  • Views 11
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start by separating the two layers. FCC Part 97 is the law. It sets which frequency segments each license class can use, which emission types are allowed, and power limits. The ARRL band plan is a voluntary agreement about how to share the space inside those segments. Nobody is required to follow it, but ignoring it is how you end up parked on a net's frequency or an FT8 watering hole. The legal limits are always the outer boundary, and the band plan is the etiquette inside them.

On privileges by class: Extra has all amateur privileges. General has most of every HF band, but the Extra-only slices sit at the lower end of the CW/data and phone sub-bands. Technician has only limited HF: CW on parts of 80, 40 and 15 m, and CW, data and SSB on parts of 10 m (28.000-28.500 MHz), limited to 200 W PEP. Technicians also have all privileges above 50 MHz. General phone on 75/80 m starts at 3.800, on 40 m at 7.175, on 20 m at 14.225 and on 15 m at 21.275. 30 m is CW and data only. Check the current ARRL chart or Part 97.301-97.305 for exact segment edges, since I'm giving them from memory.

For band edges, think about where the signal sits, not where the dial reads. An SSB signal occupies roughly 2.4-3 kHz on one side of the suppressed carrier, and that side depends on the sideband. By convention, LSB is used below 10 MHz and USB above. On 75 m with LSB, the signal extends below the dial reading. A General dialed to 3.800 would have energy below the General phone segment, so keep the dial a few kHz higher. On 20 m with USB, the signal extends upward. At the top of the band, a dial of 14.350 would put energy outside the allocation, so stay a few kHz below it. The same applies to the bottom of a CW/data segment, where your emission needs to stay entirely inside the segment. Give yourself a margin, because rig dial calibration and filter skirts are real.

For digital, the usual HF FT8 dial frequencies are around 1.840, 3.573, 7.074, 10.136, 14.074, 18.100, 21.074, 24.915 and 28.074 MHz. These are conventions, not rules, and they sit inside the digital portions of each band. Check that your mode and bandwidth are allowed in whatever segment you choose, because the FCC has changed its data rules in recent years.

  • Moderators

On 60 meters, the US operates by channels rather than a continuous segment. There are five channels, shared with federal users, and amateurs are secondary. The commonly published USB dial frequencies are 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz. USB is the standard phone sideband there, and CW and data are also permitted. General class and above can use it, with an ERP limit of 100 W relative to a half-wave dipole. The channel centers are 1.5 kHz above those dial settings, which is why people mix them up. Verify against the current FCC rules before relying on my numbers.

On VHF and UHF, the main national FM simplex calling frequencies in the ARRL plan are 52.525 MHz on 6 m, 146.520 on 2 m and 446.000 on 70 cm. 223.500 serves the same role on 1.25 m. Call there, then move to another simplex channel to talk. Weak-signal SSB and CW use separate areas of the band. On 6 m, 50.125 is the common SSB calling frequency, and 50.313 is the usual FT8 spot. On 2 m, 144.200 is the SSB calling frequency and 144.174 is where FT8 usually lives. On 70 cm, 432.100 is the weak-signal calling frequency. Repeater inputs and outputs, satellite segments and beacon sub-bands are carved out separately, so look at the band plan for your area rather than guessing. Local frequency coordinators set repeater pairs, so regional practice varies.

33 cm (902-928 MHz) is the tricky one. It is shared with Part 15 devices and other services, so noise can be severe and amateurs are secondary. There are weak-signal and narrowband areas near the bottom of the band, but check the current band plan for specifics. For 70 cm, note that operation in some areas near military radar installations is restricted, and 420-450 MHz usage can be limited by location.

Internationally, the ITU divides the world into three regions, and allocations differ. A few examples: 40 m is 7.0-7.3 MHz in Region 2 (the Americas) but 7.0-7.2 in Regions 1 and 3. 80 m is 3.5-4.0 in Region 2 but narrower elsewhere, and 160 m starts at 1.810 in Region 1. 2 m is 144-148 in Region 2 but 144-146 in Regions 1 and 3. 70 cm is 420-450 in Region 2 but 430-440 in Region 1. 6 m isn't available everywhere. Individual countries layer their own rules on top, including mode limits and power. If you operate abroad under reciprocal privileges, such as under CEPT arrangements, follow the host country's allocations and rules, not the ones you're used to at home. Always check the specifics for the country before transmitting.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.