Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Studying for the Technician (Element 2) exam: how to use the question pool without just memorizing letters

ci_cover.jpg

I'm planning to take the Technician exam and want a study plan that builds understanding instead of just memorizing answer positions. Here is what I think I know so far, so correct me where I'm wrong.

Element 2 is 35 multiple-choice questions drawn from a published pool, and as I understand it you need 26 correct to pass. The pool is split into subelements covering things like FCC rules, operating procedures, radio wave propagation, antennas and feedlines, electrical principles, safety, and RF exposure. The exam seems to draw about one question from each group of related questions, so it's hard to skip a whole topic and still pass.

Here is how I'm thinking of attacking it:

1. Confirm which pool version my exam session will use, since pools are replaced on a schedule. I'd check the NCVEC site or ask the volunteer examiner team before buying a book.

2. Read one subelement at a time, then take a short practice quiz on just that section.

3. Keep a list of the questions I miss and work out why the right answer is right, not just what it is.

4. Take a few full 35-question practice tests near the end, with a timer, and aim comfortably above the passing score.

The topics I'm least sure of are the math-flavored ones: Ohm's law, power calculations, and the wavelength-to-frequency relationship. I'm also fuzzy on what a Technician can actually do on the HF bands versus VHF/UHF, and on how repeater offsets and tones work in practice.

For people who have helped others prepare: what should I focus on first, which topics trip people up, and are there tips for the rules and numbers that show up repeatedly?

  • Replies 2
  • Views 10
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Your plan is sound. The main thing I'd add is to treat the pool as a map of ideas. If you only memorize answer letters, a practice test feels great right up until the exam reorders the choices.

For the math, there are only a few relationships, and they come up again and again. Ohm's law is E = I × R, and power is P = I × E. Rearrange them so you can find any one value from the other two. The wavelength shortcut is roughly 300 divided by the frequency in MHz, which gives the wavelength in meters. That is why 146 MHz is called the 2 meter band, and it also explains why a quarter-wave antenna gets shorter as frequency goes up. For decibels, remember that +3 dB is about double the power, -3 dB is about half, and +10 dB is ten times the power.

On privileges, the key point is that a Technician has all amateur privileges on frequencies above 30 MHz, which covers the popular 2 meter (144-148 MHz) and 70 centimeter (420-450 MHz) bands. On HF a Technician gets only limited segments, including some CW privileges and a portion of 10 meters that allows voice. The exam asks about this, so learn the specific band edges and modes from the current pool and a current band chart rather than from memory of older rules.

For license terms, know that an amateur license is issued for ten years, that there is a grace period after expiration for renewing without retesting, and that you can't transmit during that grace period. Also know that you need to keep your mailing address current in the FCC database.

  • Moderators

On repeaters and operating practices, picture how it works on the air and the questions get easier. A repeater listens on one frequency (its input) and retransmits on another (its output). Your radio needs the right offset: commonly 600 kHz on 2 meters and 5 MHz on 70 cm. Many repeaters also require a CTCSS (PL) tone on your transmitted signal before they will open up. If you can hear a repeater but it won't respond to you, the first things to check are the offset direction and the tone setting. Simplex means talking directly radio to radio with no repeater, and 146.52 MHz is the national FM simplex calling frequency.

Know the identification rules cold: give your call sign at the end of a communication and at intervals during a longer one, not just once when you start. The pool also covers courtesy and procedure, like listening before you transmit, keeping transmissions short on busy repeaters, and what to do when you hear a distress call.

Don't skip the safety and RF exposure sections, even though they feel like common sense. The questions are specific. RF exposure limits depend on frequency, power, the antenna, how long you transmit, and how far people are from the antenna. For electrical safety, think of fusing the hot lead, grounding, keeping antennas and masts well away from power lines, and not working on antennas during a thunderstorm. These are some of the easiest points on the test if you've read the explanations.

For practice tests, do them by subelement first so you can find weak spots, then do full timed runs. Reread the explanation for every question you miss. Many study guides and practice sites provide those explanations, and they're what makes the logic stick.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.