Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Building a 5-watt portable kit: rig choice, antenna, and LiFePO4 power for QRP field operation

ci_cover.jpg

This thread is for sorting out what actually matters when you go low power and portable. The usual gear conversation (KX2 vs KX3, Mountain Topper vs a TR-35) tends to bury the real point. At 5 W, the antenna and the operating habits do most of the work, and the rig mostly decides how much you enjoy the time in the field.

The numbers. The common QRP definition, and the one QRP-ARCI uses, is 5 W output on CW and 10 W PEP on SSB. Going from 100 W to 5 W is a 13 dB drop, a bit over two S-units on the usual 6 dB-per-S-unit scale. That is noticeable, but it is not the end of a contact. A resonant, well-placed antenna can easily give you back more than 13 dB compared to a compromised one, so it pays to fix the antenna before you buy a bigger amplifier.

Rig categories, roughly:

Elecraft KX2 and KX3 are full-featured multimode rigs that run up to about 10 W. The KX2 covers 80 through 10 m. The KX3 adds 160 m and 6 m. They are CW, SSB and digital capable and have optional internal ATUs. They cost the most, but they are the "one box does everything" option. If you want SSB at 10 W PEP in the field, this is the class to look at.

Mountain Topper rigs (the MTR series) are small CW-only monoband or multiband radios designed around summit activations. Weight and battery current are the priority, so features are minimal. The tradeoff is simple: very light, very focused, and no SSB.

Penntek TR-35 and similar kit transceivers are compact CW rigs built around a few bands or a single band. Building one teaches you how a superhet transceiver works, and the finished radio is small enough to carry anywhere.

Hendricks QRP Kits has long supplied portable-oriented kits and accessories. If you want a first build, check the current catalog to see what is in stock and which bands each kit covers.

Pixie-style transceivers are the very bottom of the ladder. They are tiny, cheap, simple circuits where the same transistor does a lot of jobs. Output is typically a fraction of a watt, selectivity is poor and drift can be a problem. They are fun to build and to learn from, but they are not what I would pick as a main field rig.

Calling frequencies are worth knowing, but always check your local band plan. Common CW QRP spots are 3.560, 7.030, 10.106, 14.060, 18.096, 21.060, 24.906 and 28.060 MHz. Common SSB QRP spots are 3.985, 7.285, 14.285, 21.385 and 28.885 MHz. A QRP call there is a hint that you are listening for weak signals, not a reserved channel.

Antennas: The options most people compare are a resonant inverted-V or dipole, an end-fed half-wave with a 49:1 transformer, a link dipole, and a vertical with radials or a counterpoise. Each has strengths. A dipole is efficient and predictable. An EFHW is quick to deploy and works on harmonics. A vertical can give lower-angle takeoff but depends heavily on its ground system. Feedline loss and a common-mode choke matter too, because every dB you lose in the cable is a dB you do not get back.

Power: A 4S LiFePO4 pack has a nominal voltage of 12.8 V and a fairly flat discharge curve. Full charge is around 14.4 to 14.6 V, so check your rig's maximum input rating before connecting one. Some radios have a lower ceiling than you might expect. LiFePO4 is popular for field use because it is stable and tolerates many cycles. A small 3 to 6 Ah pack is usually plenty for a few hours of CW.

Questions for the thread: What would you pick as a first rig for SOTA or park activations if weight is the main limit? And what antenna would you carry if you can only bring one?

  • Replies 2
  • Views 10
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On the first-rig question, the answer depends on whether you want to operate SSB. If you do, the KX2 class of radio is the straightforward route because CW-only rigs like the MTR and TR-35 will not help you there. If you are happy on CW, a lightweight CW rig is hard to argue with. Receive current drain matters as much as transmit power, because you spend far more time listening than sending. Compare the receive-mode current figures in the manuals, not just the 5 W transmit spec.

One more thing about SSB at QRP: the 10 W PEP figure is a peak number, and average power in speech is much lower. A clean, compression-free signal into a good antenna is not hopeless, but expect to work stronger stations or use a spotting network and calling frequencies rather than hoping to win a pileup.

  • Administrators

If I had to carry one antenna, I would lean toward a simple resonant wire for the band you plan to use most. A 40 m EFHW is about 66 ft of wire and a 20 m one is about 33 ft. A dipole fed with coax needs a support in the middle, which can be a pain on a summit, while an EFHW can be an inverted L or sloper off one tree branch. The 49:1 transformer will have some loss, so build or buy a good one and keep the radiator reasonably high.

For power, an additional point on LiFePO4: use a fuse near the battery, and do not depend on a balance-charged pack you have never measured. A cheap in-line voltmeter is a good safety net. If you plan to build your own pack, a battery management board with protection is worth the small extra cost. And if you are interested in QRP-ARCI, look at their current contest and award rules before you go out, since exact rules and sections can change from year to year.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.