ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Getting from 5 to 20 WPM: what actually moves the needle, and where do people stall?
Starting a thread on the 5-to-20 WPM climb, because the advice on it tends to be scattered across a dozen sites and the same few questions keep coming up. Here is a rough framework, and I'd like to hear where it breaks down for people.
First, the foundation. Whatever method you use, the goal is to hear a character as a single sound, not as dits and dahs you count and translate. That is why the Koch method (characters sent at full speed, starting with just two and adding one at a time) and Farnsworth spacing (characters at 18 WPM or more with extended gaps) both work. The character speed stays high enough that counting is impossible. If you learned at a slow character speed and are now stuck around 8 to 10 WPM, the habit of counting elements is often the cause, and the cure is to go back and relearn the shapes at a higher character speed.
Second, plateaus. Many people report slowing down somewhere around 10 to 13 WPM, and again in the high teens. The usual explanation is that you are moving from recognizing letters to recognizing whole words and common patterns, and that transition feels like going backward before it clicks. Things that tend to help: short sprint sessions at a speed slightly above where you are comfortable, then a drop back to a comfortable speed so the sprint speed starts to feel easier. Another is to stop trying to copy 100 percent and accept missing a letter. If you stop to puzzle over a missed character, you lose the next three.
Third, head copy. Writing every letter is a fine way to learn, but it caps you at your pencil speed, and it often caps you well below your ear speed. A common way to transition is to stop writing letters and write only words, then only numbers and callsigns, then nothing. Common words such as THE, AND, FOR, YOU and RIG, plus prosigns and Q-signals, are good first targets because you start hearing them as units. Try to stay a character or two behind the sender instead of racing to decode each letter the instant it ends.
Fourth, drills. Callsign practice is its own skill, because callsigns are random strings with no context to help you guess. RufzXP is built for this and adapts its speed to your results. Morse Runner simulates a contest pileup, which is a good way to practice pulling a call out of noise. LCWO.net and the CWops CW Academy materials are other widely used resources. A mix of plain-text words, random groups, callsigns and real on-air recordings works better than any one of them alone.
Fifth, on the air. A standard QSO is quite formulaic: CQ, callsigns, RST, name, QTH, rig and weather, then 73 and a closing prosign. Knowing the skeleton means you only have to copy the variable parts. If the other station is too fast, QRS is the standard polite request. Slow nets and practice sessions exist for exactly this reason, so it is worth checking what is active in your region. Short weekly mini-contests and full weekend contests are good for speed because the exchange repeats constantly. You can run in search-and-pounce mode, copy a few exchanges, and ask for repeats without embarrassment.
Sixth, sending. Paddle setup matters more than people expect. Iambic mode A and mode B differ in what happens when you release the squeeze, with mode B adding one extra element, so choose one and stay with it long enough to build muscle memory. Keep weight near the default at first, set sidetone somewhere comfortable (500 to 700 Hz is typical), and adjust paddle gap and tension so you are not fighting the paddle. Try not to let your sending speed run ahead of your receiving speed, because sloppy sending trains sloppy habits and makes you harder to copy.
Finally, software decoders. They can be useful for checking your copy afterward, especially when you record a QSO, copy it by ear and then compare. As a primary tool they struggle with QSB, noise, an uneven fist and drifting speed, and watching the screen pulls your attention away from the sound. Most people who want head copy find that relying on a decoder works against them.
A few questions for the group. What speed range gave you the biggest wall, and what got you through it? Do you split your practice time between receiving and sending, or focus on one? And how long did it take you to go from writing everything down to copying in your head?
Starting a thread on the 5-to-20 WPM climb, because the advice on it tends to be scattered across a dozen sites and the same few questions keep coming up. Here is a rough framework, and I'd like to hear where it breaks down for people.
First, the foundation. Whatever method you use, the goal is to hear a character as a single sound, not as dits and dahs you count and translate. That is why the Koch method (characters sent at full speed, starting with just two and adding one at a time) and Farnsworth spacing (characters at 18 WPM or more with extended gaps) both work. The character speed stays high enough that counting is impossible. If you learned at a slow character speed and are now stuck around 8 to 10 WPM, the habit of counting elements is often the cause, and the cure is to go back and relearn the shapes at a higher character speed.
Second, plateaus. Many people report slowing down somewhere around 10 to 13 WPM, and again in the high teens. The usual explanation is that you are moving from recognizing letters to recognizing whole words and common patterns, and that transition feels like going backward before it clicks. Things that tend to help: short sprint sessions at a speed slightly above where you are comfortable, then a drop back to a comfortable speed so the sprint speed starts to feel easier. Another is to stop trying to copy 100 percent and accept missing a letter. If you stop to puzzle over a missed character, you lose the next three.
Third, head copy. Writing every letter is a fine way to learn, but it caps you at your pencil speed, and it often caps you well below your ear speed. A common way to transition is to stop writing letters and write only words, then only numbers and callsigns, then nothing. Common words such as THE, AND, FOR, YOU and RIG, plus prosigns and Q-signals, are good first targets because you start hearing them as units. Try to stay a character or two behind the sender instead of racing to decode each letter the instant it ends.
Fourth, drills. Callsign practice is its own skill, because callsigns are random strings with no context to help you guess. RufzXP is built for this and adapts its speed to your results. Morse Runner simulates a contest pileup, which is a good way to practice pulling a call out of noise. LCWO.net and the CWops CW Academy materials are other widely used resources. A mix of plain-text words, random groups, callsigns and real on-air recordings works better than any one of them alone.
Fifth, on the air. A standard QSO is quite formulaic: CQ, callsigns, RST, name, QTH, rig and weather, then 73 and a closing prosign. Knowing the skeleton means you only have to copy the variable parts. If the other station is too fast, QRS is the standard polite request. Slow nets and practice sessions exist for exactly this reason, so it is worth checking what is active in your region. Short weekly mini-contests and full weekend contests are good for speed because the exchange repeats constantly. You can run in search-and-pounce mode, copy a few exchanges, and ask for repeats without embarrassment.
Sixth, sending. Paddle setup matters more than people expect. Iambic mode A and mode B differ in what happens when you release the squeeze, with mode B adding one extra element, so choose one and stay with it long enough to build muscle memory. Keep weight near the default at first, set sidetone somewhere comfortable (500 to 700 Hz is typical), and adjust paddle gap and tension so you are not fighting the paddle. Try not to let your sending speed run ahead of your receiving speed, because sloppy sending trains sloppy habits and makes you harder to copy.
Finally, software decoders. They can be useful for checking your copy afterward, especially when you record a QSO, copy it by ear and then compare. As a primary tool they struggle with QSB, noise, an uneven fist and drifting speed, and watching the screen pulls your attention away from the sound. Most people who want head copy find that relying on a decoder works against them.
A few questions for the group. What speed range gave you the biggest wall, and what got you through it? Do you split your practice time between receiving and sending, or focus on one? And how long did it take you to go from writing everything down to copying in your head?
Link to comment
https://www.hamradiobase.com/forums/topic/11847-getting-from-5-to-20-wpm-what-actually-moves-the-needle-and-where-do-people-stall/Share on other sites