Remote station control: picking between IC-7610/RS-BA1, Flex, SCU-LAN10, RigPi and receive-only SDRs, and what to do about latency, security and rules
- Replies 2
- Views 45
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Chad 1 post
This thread is for comparing approaches to remote operation, since the options get lumped together even though they solve different problems. Three categories are worth separating.
1. Receive-only remote SDRs (WebSDR, KiwiSDR). These are shared receivers you listen through in a browser. A KiwiSDR covers roughly 0-30 MHz with several simultaneous user channels and a GPS-derived time and frequency reference. WebSDR is the software originally developed at the University of Twente, and many sites run it on different hardware. Neither lets you transmit, so there are no control-operator questions for the listener. They are mainly useful for checking propagation, comparing your signal at a distance, or hearing a band your own station can't.
2. Radio-native remote control. The Icom IC-7610 has a LAN port and works with Icom's RS-BA1 software (wfview is a popular open-source alternative). FlexRadio's SmartSDR is network-based by design, and SmartLink extends it across the internet. Yaesu's SCU-LAN10 adds a network interface to supported Yaesu radios, but check Yaesu's compatibility list for your model, and note that the audio and client side often involves third-party software.
3. Station-side controllers and services. RigPi is a Raspberry Pi-based station server that sits between the radio and the network. RemoteHams.com is a service and software ecosystem for connecting and sharing remote stations. Read its current documentation for what it supports, because the details change and I don't want to state them from memory.
Discussion questions: for a first remote setup, is the manufacturer's own path (RS-BA1, SmartLink) the better starting point, or is a generic server with a VPN more flexible? And how much of the failsafe design (transmit timeout, power control, antenna state) should live on the radio side rather than in the client software?
Link to comment
https://www.hamradiobase.com/forums/topic/10781-remote-station-control-picking-between-ic-7610rs-ba1-flex-scu-lan10-rigpi-and-receive-only-sdrs-and-what-to-do-about-latency-security-and-rules/Share on other sites