ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Getting started with EME: what each band really demands, and where new stations get stuck
Moonbounce looks like a station-size problem, but it is mostly a link-budget problem. Once you know what the path costs and which losses you can recover, the equipment choices on each band make more sense. This thread is for comparing approaches on 2 m, 70 cm, 23 cm and the microwave bands, and for the operating details that decide whether a sked works.
Round-trip path loss is roughly 250 dB or more on 144 MHz. It rises by about 20 log of the frequency ratio, so expect roughly 9 to 10 dB more on 432 MHz and another 9 to 10 dB on 1296 MHz. The moon's distance changes the loss too. Perigee versus apogee is worth about 2 dB, which is a real difference when you are working at the decode threshold. The round-trip delay is about 2.5 seconds, which is why you can hear your own echo and why a quick echo test is the first sanity check.
On 2 m, the usual entry point for digital EME is an array of several long-boom Yagis. Four is a commonly discussed minimum, with more for a comfortable margin, plus a mast-mounted low-noise preamp and a legal-limit-class amplifier. Exact results depend on your local noise, feedline loss and who you are working. Big stations can work smaller ones on JT65 or Q65, but a small station will not hear its own echo and has to rely on the other end's ears. 70 cm needs less physical size for the same gain, but you need more elements or more antennas, tighter mechanical accuracy and a very good feedline. On 23 cm, a dish of roughly 3 m is a common starting point. With about 55% efficiency that gives around 30 dBi and a beamwidth near 5 degrees. At 10 GHz the same 3 m dish gives roughly 47 dBi, but the beamwidth drops to about 0.7 degrees, so tracking accuracy becomes the main challenge. The moon itself is only about half a degree across.
Receive performance matters as much as transmit power. A low-noise preamp close to the feed point, sequenced T/R switching and as little loss as possible ahead of the first stage are the basics. Sky temperature is a big factor on 2 m, where galactic noise can dominate when the moon sits in a hot part of the sky. Measuring sun noise or moon noise gives you a useful check on whether your system is as good as you think.
For modes, JT65 was the long-time standard for weak-signal EME. Q65 in WSJT-X is the newer option, and its submodes let you match tone spacing to the Doppler spread you expect on a band. Spread is mostly caused by libration, the moon's slight rocking, and it scales with frequency. It is modest on 2 m, much more obvious on 23 cm, and large on 10 GHz. Pick the submode for the band and for what the other station is using. Check the WSJT-X documentation for current recommendations instead of relying on old rules of thumb.
Polarization is where many first schedules go wrong. On 2 m and to a lesser extent 70 cm, Faraday rotation in the ionosphere can swing the received polarization significantly, so signals fade in and out even when everything else is fine. Spatial polarization offset also exists because the two stations see the moon from different places. Cross-polarized Yagi arrays with switching or phasing help here. On 23 cm and above, Faraday rotation shrinks and fixed linear or circular feeds are more practical. If you use circular polarization, remember that reflection reverses the sense, so agree a convention with your partner.
For planning, you want a mutual moon window, a reasonable moon declination, favorable sky noise and a Doppler offset you can manage. Tools such as MoonSked and VK3UM's EME calculator help with windows and expected performance. The hardware that follows the moon is the rotor, or the az/el mount with its controller and software. It needs to be accurate enough for the beamwidth you have, with a backlash and calibration routine you actually trust.
Questions for the thread: what is the smallest 2 m array you consider worth building today for Q65? And what is your preferred way to check pointing and system noise before a sked?
Moonbounce looks like a station-size problem, but it is mostly a link-budget problem. Once you know what the path costs and which losses you can recover, the equipment choices on each band make more sense. This thread is for comparing approaches on 2 m, 70 cm, 23 cm and the microwave bands, and for the operating details that decide whether a sked works.
Round-trip path loss is roughly 250 dB or more on 144 MHz. It rises by about 20 log of the frequency ratio, so expect roughly 9 to 10 dB more on 432 MHz and another 9 to 10 dB on 1296 MHz. The moon's distance changes the loss too. Perigee versus apogee is worth about 2 dB, which is a real difference when you are working at the decode threshold. The round-trip delay is about 2.5 seconds, which is why you can hear your own echo and why a quick echo test is the first sanity check.
On 2 m, the usual entry point for digital EME is an array of several long-boom Yagis. Four is a commonly discussed minimum, with more for a comfortable margin, plus a mast-mounted low-noise preamp and a legal-limit-class amplifier. Exact results depend on your local noise, feedline loss and who you are working. Big stations can work smaller ones on JT65 or Q65, but a small station will not hear its own echo and has to rely on the other end's ears. 70 cm needs less physical size for the same gain, but you need more elements or more antennas, tighter mechanical accuracy and a very good feedline. On 23 cm, a dish of roughly 3 m is a common starting point. With about 55% efficiency that gives around 30 dBi and a beamwidth near 5 degrees. At 10 GHz the same 3 m dish gives roughly 47 dBi, but the beamwidth drops to about 0.7 degrees, so tracking accuracy becomes the main challenge. The moon itself is only about half a degree across.
Receive performance matters as much as transmit power. A low-noise preamp close to the feed point, sequenced T/R switching and as little loss as possible ahead of the first stage are the basics. Sky temperature is a big factor on 2 m, where galactic noise can dominate when the moon sits in a hot part of the sky. Measuring sun noise or moon noise gives you a useful check on whether your system is as good as you think.
For modes, JT65 was the long-time standard for weak-signal EME. Q65 in WSJT-X is the newer option, and its submodes let you match tone spacing to the Doppler spread you expect on a band. Spread is mostly caused by libration, the moon's slight rocking, and it scales with frequency. It is modest on 2 m, much more obvious on 23 cm, and large on 10 GHz. Pick the submode for the band and for what the other station is using. Check the WSJT-X documentation for current recommendations instead of relying on old rules of thumb.
Polarization is where many first schedules go wrong. On 2 m and to a lesser extent 70 cm, Faraday rotation in the ionosphere can swing the received polarization significantly, so signals fade in and out even when everything else is fine. Spatial polarization offset also exists because the two stations see the moon from different places. Cross-polarized Yagi arrays with switching or phasing help here. On 23 cm and above, Faraday rotation shrinks and fixed linear or circular feeds are more practical. If you use circular polarization, remember that reflection reverses the sense, so agree a convention with your partner.
For planning, you want a mutual moon window, a reasonable moon declination, favorable sky noise and a Doppler offset you can manage. Tools such as MoonSked and VK3UM's EME calculator help with windows and expected performance. The hardware that follows the moon is the rotor, or the az/el mount with its controller and software. It needs to be accurate enough for the beamwidth you have, with a backlash and calibration routine you actually trust.
Questions for the thread: what is the smallest 2 m array you consider worth building today for Q65? And what is your preferred way to check pointing and system noise before a sked?
Link to comment
https://www.hamradiobase.com/forums/topic/10879-getting-started-with-eme-what-each-band-really-demands-and-where-new-stations-get-stuck/Share on other sites