Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a dual-band mobile install: FTM-500D vs ID-5100A vs TM-D710G, plus wiring, noise and cross-band questions

ci_cover.jpg

I'm putting together a plan for a 2 m / 70 cm mobile install and want to sort out the radio choice and the install details before I drill or cut anything. The three radios I keep comparing are the Yaesu FTM-500D, the Icom ID-5100A and the Kenwood TM-D710G. All three are dual-band FM mobiles with a separable head, and I'm treating the main differences as follows.

The FTM-500D and ID-5100A are digital-focused: C4FM on the Yaesu, D-STAR on the Icom. That only matters if there's local digital activity you'd actually use. The TM-D710G is more of an APRS and analog radio, with a built-in TNC and GPS. Please correct me if I've got any of that wrong.

Here are the things I'd like input on:

1. Power wiring. Is going direct to the battery with an inline fuse on the positive lead the right approach, and how close should the fuse be to the battery? Is it ever acceptable to use a fused accessory circuit for a 50 W radio?

2. Mounting. Under-dash bracket, seat-base mount, or a remote-mounted body with just the head on the dash? I want to be able to reach the controls without taking my eyes off the road for long.

3. Noise. What are the usual sources of alternator whine and ignition hash on 2 m and 70 cm, and what's the sensible order for troubleshooting them?

4. Cross-band repeat. I'd like to use an HT on the 70 cm side while away from the vehicle, with the mobile retransmitting on 2 m. Which of these radios support it, and what should I watch for with ID and legality?

5. Etiquette. What are the unwritten rules of mobile operating on repeaters and simplex?

  • Replies 2
  • Views 36
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Starting with power, since that's where most install problems begin. Run the supplied power cable (or heavier wire if you have to extend it) straight to the battery, with the fuse in the positive lead as close to the battery terminal as practical, usually within several inches. The fuse protects the wire, so it has to sit at the source end. Use the fuse rating and wire gauge in your radio's manual. A 50 W VHF/UHF mobile draws a significant current on transmit, so a cigarette lighter socket or a random accessory circuit is a poor choice. Voltage drop on thin or shared wiring can cause low output, resets, or a radio that works fine on receive and misbehaves when you key up.

Use a rubber grommet where the cable passes through the firewall so the insulation doesn't chafe. Keep the cable away from sharp edges and heat, and make the connections properly: crimp and solder where appropriate, or use quality terminals. For the negative lead, battery negative is the traditional choice. Some newer vehicles have a battery monitoring sensor on the negative post, so check the vehicle manual or a service source before attaching anything there. If the manufacturer specifies a ground point or sensor arrangement, follow that.

On the radios themselves, I'd decide based on what you'll really operate. If you won't touch digital voice, the extra digital features on the FTM-500D and ID-5100A are just things you paid for. If APRS appeals to you, the TM-D710G is built around it. Before buying, read each manual's section on cross-band repeat, because feature sets differ between models and generations. I wouldn't assume all three do it.

  • Moderators

Some notes on the other parts of your list.

Noise: before blaming the radio, look at the antenna and coax. A roof-center NMO mount with a properly sized quarter-wave or similar antenna gives a good ground plane and keeps the antenna away from most vehicle electronics. Check SWR on both bands, since a poor mount or a bad coax connection can hurt performance and make noise problems worse. If you hear a whine that rises and falls with engine RPM, suspect the alternator or power wiring. Whining that changes with RPM often calls for better power and ground connections, a ferrite choke on the power leads, or a noise filter designed for the purpose. Hash that's constant regardless of RPM often comes from something else: LED headlights or interior lights, a DC-DC converter, a USB charger, or a dash camera. Turn accessories off one at a time and watch the S-meter, which is a simple way to isolate the source. Keep the power cable and coax from running parallel to other wiring bundles where you can.

Cross-band repeat: use it only if you've confirmed your radio supports it and you understand the rules for your license class and country. You're responsible for identifying properly, and for making sure the retransmit frequencies are legal and not in use. Keep power reasonable, and don't point it at a busy repeater input. If the HT and mobile are on bands close enough to interfere, the mobile receiver can be desensitized by its own transmitter, so some separation helps.

Etiquette: listen before keying, since you might be stepping on a conversation or a net. On a repeater, short calls such as your callsign are enough. You don't need to announce that you're "mobile" unless it's relevant, and you can leave it out if you're parked. Safe driving comes first: if you're in traffic or an intersection, don't fiddle with the radio or hold a long conversation. Set up memory channels before you drive so you don't have to tune while moving. On simplex, use the established calling frequencies (146.520 MHz and 446.000 MHz are the national simplex calling frequencies in the US), then move to another frequency once you've made contact so you aren't tying up the channel. Keep your transmissions brief and let others in.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.