Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Building a 5 W portable station: rig, antenna and battery choices that matter

ci_cover.jpg

Starting a discussion on the practical side of QRP. The usual definition, and the one QRP-ARCI uses, is 5 W output on CW and 10 W PEP on SSB. That is about 13 dB below 100 W, or a little over two S-units if you count 6 dB per S-unit. Most of that gap can be recovered with a better antenna, a better location, and sensible operating, and none of it needs more power.

The rig choices cover a wide range. At the compact end are kits like the Mountain Topper family from LNR Precision, a CW-only multiband design built for summit activations, and the Penntek TR-35, a small CW kit. Hendricks QRP Kits also built field-oriented radios such as the PFR-3. Check what is currently available and which bands each version covers, because kit designs and band options change. At the simple end is the Pixie, a minimal crystal-controlled CW transceiver. It teaches a lot about how a transmitter and receiver work, but it has a wide-open direct-conversion receiver and little selectivity, so it is a project more than a primary station.

Elecraft's KX2 and KX3 sit in a different class. They cover SSB, CW and digital modes, include an internal ATU option, and can be run at QRP levels or turned up a little. The KX2 is rated for roughly 10 W and the KX3 for roughly 15 W with a suitable external supply. They are more flexible than a dedicated CW kit, at a higher price and with more menu depth.

For finding contacts, the commonly cited QRP calling frequencies are around 3.560, 7.030, 10.106, 14.060, 21.060 and 28.060 MHz on CW, and around 3.985, 7.285, 14.285, 21.385 and 28.385 MHz on SSB. Treat these as gathering areas rather than reserved channels, and check them against your region's band plan, since they are conventions and not rules. QRP-ARCI also runs contests and awards, which are a good way to find other low-power stations.

For power, a LiFePO4 pack is a popular choice. A 4S pack is about 12.8 V nominal and about 14.4 to 14.6 V fully charged, with a flat discharge curve. Check your rig's maximum input voltage before connecting a freshly charged pack, and fuse the positive lead close to the battery. A small pack goes a long way, because receive current often matters more than transmit current over a long outing.

Questions for the thread: what antenna do you reach for first when setup time is short, and where do you think the best trade-off between weight, band coverage and operating comfort lies?

  • Replies 2
  • Views 84
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On antennas, an end-fed half-wave with a 49:1 transformer is a common starting point. It is light, resonant on one band, and fed with coax, which keeps losses and common-mode problems manageable. Its drawback is that each band needs its own wire length or a trap or link arrangement. A resonant inverted-V dipole on a light mast usually wins on efficiency when you can find a support, because it needs no matching network or counterpoise and the feedpoint is easy to understand.

A random wire with a 9:1 unun and a counterpoise is more flexible, but the tuner has to do more work, and losses in the matching system come straight out of your 5 W. Whatever you choose, put a choke at the rig end if you see RF in the shack or strange SWR changes when you touch the equipment. Height and clear surroundings often matter more than the antenna type.

One practical tip is to take a short, measured length of coax and a small SWR or antenna analyzer reading at the site. A few minutes spent confirming resonance saves a lot of calling into a mismatched antenna.

  • Moderators

On the rig question, I would split it by how you operate. If you only want to do CW on a few bands, a Mountain Topper or TR-35 style radio is small, draws little power, and keeps the kit light. If you want SSB, digital or more bands, the KX2 or KX3 makes more sense, at the cost of more weight and a higher price. A kit also gives you a repair path, since you know what is inside.

For batteries, size the pack from your actual current draw, not from the rated watts. An estimate is average receive current multiplied by listening time, plus transmit current multiplied by the share of time spent transmitting. LiFePO4 handles cold weather better than many alternatives when discharging, but charging below freezing is not good for it, so check the cell and BMS specifications. A battery with a built-in BMS and a proper fuse is safer than loose cells.

On SSB at 10 W PEP, speech peaks are short, so a compressor or processor setting, if the rig has one, can help your average talk power, though overdoing it hurts readability. On CW, a well-timed call, patience and a clean keying note are your biggest advantages when the band is busy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.