Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a WWFF activation: KFF references, the 44-QSO line, and doubling up with POTA

ci_cover.jpg

I'd like to collect practical notes on WWFF (World Wide Flora and Fauna) for people who already hunt or activate POTA and are curious about adding it, or who are new to both. Corrections are welcome, because rules and databases change and the official WWFF pages are the final word.

WWFF references are a national prefix plus FF and a number. In the US the prefix is K, so references look like KFF-1234. Germany uses DLFF-, Australia uses VKFF-, and so on. The references cover protected areas such as national and state parks, wildlife refuges, forests and nature reserves. The program is international, so the same operating habits work whether you're activating at home or travelling.

The biggest difference from POTA is the activation threshold. As I understand it, WWFF asks for at least 44 QSOs from a reference within a single UTC day for the activation to count, versus 10 for POTA. That changes how you plan. Band choice, mode, spotting and how long you can stay all matter more at 44 than at 10. Hunters have no minimum: one QSO with an activator at a reference counts for you.

A few questions I'd like to discuss:

1. For combined POTA and WWFF activations, how do you check that the park you're in is valid for both programs? Many parks appear in both, but I wouldn't assume the boundaries or the park lists match. Some areas may be in one program only, or the WWFF reference may cover a different area than the POTA one.

2. How do you handle logging? The way I'd approach it is one clean log with the correct reference stored for each program, then export ADIF and upload according to the current instructions on each program's site. Check which ADIF fields each one expects before the trip, not after.

3. What's your approach to spotting, calling and rotating bands to reach 44 without wearing out one frequency? Do you split the time between CW, SSB and digital modes?

4. For hunters, which awards and diplomas are worth chasing? WWFF has certificates based on the number of references worked or activated. Please check the current award rules on the WWFF site rather than relying on memory, including which modes and bands count.

  • Replies 2
  • Views 38
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On the combined activation question, the easiest mistake is to treat the two programs as one list. Before you leave, look up the reference in each program separately and read the boundary or location information for both. If you can, check where the operating spot sits relative to the area. Parking lots, trailheads and picnic areas are usually inside, but a roadside pull-off near a boundary is worth a second look. If the park is in both programs and you're inside the valid area, one set of contacts can serve both, but each program has its own logging and submission steps.

For the 44-QSO target, it helps to treat POTA's 10 as a checkpoint rather than the goal. Once you're past 10, keep going rather than packing up. A reasonable plan is to spot yourself on your first band, run until the rate slows, then move to another band or mode. Remember that the activation day is counted in UTC, so if you operate across local midnight, split the contacts carefully. Whether a QSO made late in the day or after UTC midnight counts toward the right activation depends on the date in your log.

  • Administrators

For operating tips, the practical points are mostly about being easy to copy. Give the reference clearly and don't rush it. On SSB, something like "CQ World Wide Flora and Fauna, CQ WWFF" followed by your callsign and the reference, phonetically, is much easier to work than a fast, clipped call. Some hunters are chasing the reference, others just the contact, so repeat the reference periodically. On CW, send it a few times per CQ sequence, not only at the start. If you're working POTA hunters at the same time, say both programs in your CQ so nobody is confused about what you're calling.

It's also worth thinking about band conditions before you pick the spot. If you need 44 QSOs and only have a short window, it's better to pick the band you expect to be open and have an antenna that works well there than to start with the one you like most. Digital modes can add contacts, but don't plan on them alone unless you know hunters are available on that mode. Finally, check the park's own rules, including quiet hours, access limits, and restrictions on antenna supports or on setting up away from designated areas. A great reference is no use if you've set up somewhere you shouldn't be.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.