POTA basics for new activators and hunters: park references, the 10-QSO rule, spotting, and logging
- Replies 2
- Views 33
- Created
- Last Reply
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
A lot of people get interested in Parks on the Air because it needs very little gear. This thread is a starting point for the practical questions that come up before a first activation or a first hunting session. Corrections and local knowledge are welcome.
Park references. Every POTA entity has a reference made of a prefix and a number. In the US it looks like K-0001, with a four-digit number. Other countries use their own prefixes. When you spot, log, or call CQ, use the exact reference from the POTA park listing. Similar park names are easy to confuse, and a wrong digit sends the credit to the wrong park.
Activator vs. hunter. The activator is the person operating from the park. The hunter is anyone who contacts activators, from home, a car, or another park. To count as a valid activation, the activator needs at least 10 QSOs within a single UTC day. Hunters only need to be in the activator's log. Check the current POTA rules for how band and mode changes affect what counts as a separate QSO.
Spotting. Spots on the POTA website and app are how most hunters find you. A useful spot has the activator's callsign, park reference, frequency, mode, and a short comment such as 'QRP, 5 W, loop on a pole'. Your own spot is usually the biggest factor in whether you get a pileup or sit calling CQ. Spots can come from you, from hunters, or, for CW and some digital modes, from automated skimmer networks. Update the spot if you QSY, and send a quick note when you close down.
Logging. Activators upload an ADIF file to the POTA site. Hunters generally do not upload anything, because their credit is built from activator logs. Many logging programs and phone apps have POTA fields, and the ADIF should carry the park reference in the proper MY_SIG / MY_SIG_INFO fields. Keep one log per park per UTC day, and watch for a UTC rollover in the middle of a session.
Two-fers and roving. Some parks overlap, such as a state park inside a national trail corridor, so one location has more than one reference. That is a two-fer (or three-fer). The same QSOs can be logged for each reference you are physically in, but confirm you are actually within each boundary. Roving means activating several parks in a day, and each park needs its own 10 QSOs. Plan travel time around the UTC day, because a rove that crosses 0000 UTC can split your contacts.
Rules, antennas, and power. Each park manager sets the rules, and those matter more than POTA's general guidance. Look for restrictions on staking, tying antennas to trees, running wire across trails, using generators, or setting up in certain areas. QRP is popular because of portability, but there is no required power level. A simple vertical or end-fed wire with a short support often works well enough. A 100 W signal is easier to copy than a 5 W one, but a good antenna and a well-chosen band can make up much of the difference.
Awards. POTA has recognition for both activators and hunters, based on things like the number of parks, QSOs, and endorsements. The details change, so check the awards pages on the site rather than relying on memory.
Questions to get started: what is your preferred first-activation setup, how do you handle a slow start when you are stuck below 10 QSOs, and what logging software do you find least painful in the field?
Link to comment
https://www.hamradiobase.com/forums/topic/11116-pota-basics-for-new-activators-and-hunters-park-references-the-10-qso-rule-spotting-and-logging/Share on other sites