Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Getting past the 15 WPM plateau: paddles, filters, Farnsworth and what to practice

ci_cover.jpg

This thread is for CW operators at any level. The aim is to collect practical ideas on sending, receiving, and the gear that helps or gets in the way. Many operators stall somewhere between 12 and 20 WPM. Copy stops being letter-by-letter and has not yet become word-by-word, and sending can get sloppy because the hands are ahead of the ears.

Here are some starting points. Add your own, or disagree.

Receiving. Farnsworth timing is a common way to learn. Characters are sent at a faster speed, such as 18 to 20 WPM, with extra space between characters and words so the overall speed is lower. The point is that you learn each character as a single sound, not a count of dits and dahs. The risk is staying on stretched spacing so long that normal-speed QSOs feel rushed. Many people reduce the extra spacing gradually until character speed and overall speed match.

Another trap is writing every letter. At some point you need to copy a little behind the signal and let words form in your head. Exchanges like RST, name, QTH and 73 are predictable, so they make good practice for head copy.

Sending. Timing matters more than speed. The usual standard is a dah of three dit lengths, one dit of space within a character, three between characters, and seven between words. Many sloppy-sounding stations are not slow. They run characters together or leave odd gaps, so what comes out is "AND" when the sender meant "ANN". Record yourself and listen back, or send to a decoder and see where it stumbles.

Keys. A straight key is simple and teaches rhythm. An iambic paddle with a keyer is faster and easier on the wrist. Iambic mode A and mode B differ in what happens when you release a squeeze: mode B adds one extra opposite element. Neither is wrong, but if your keyer's behavior surprises you, check which mode it is set to. A bug, such as a Vibroplex, makes dits automatically with a pendulum and leaves dahs to the operator. It has a distinctive swing that takes practice, and it is not a shortcut to speed. Paddles from makers such as N3ZN are popular partly because the spring tension and contact spacing are adjustable. Whatever you use, tune the adjustments to your hand instead of living with the factory settings.

Filters and QSK. A narrow CW filter helps on a crowded band, but too narrow a filter can produce ringing that smears characters, especially with DSP filters at very low bandwidths. A bandwidth of a few hundred hertz is a common starting point. Full break-in (QSK) lets you hear the other station between your elements and is useful in contests and when someone is trying to break you. Semi break-in with a hang time is easier on relays and on some amplifiers. Check that your amplifier and antenna switching can handle QSK before enabling it.

Skimmers and decoders. CW Skimmer can decode many signals at once, which is useful for finding stations and for working out who is spotting whom. Decoders do poorly on QSB, fading, noise and irregular hand-sending. They are a useful cross-check but a poor substitute for learning to copy. Software that gives you perfect text will not train your ear.

Prosigns and abbreviations. Common ones include AR (end of message), SK (end of contact), BT (pause or break), KN (go ahead, only the named station), and AS (wait). Abbreviations such as TU, AGN, PSE, QRS, QRL?, QRM and QSB save time. In contests you will also see cut numbers, such as N for 9 and T for 0, and 5NN for 599. Pick up the exchange habits in the contest you are working and do not over-abbreviate in ordinary rag-chews.

So, a few questions for the thread. What changed your copy speed the most? Do you prefer a keyer or a bug, and why? And how do you set your filter and QSK for contest conditions as opposed to casual operating?

  • Replies 2
  • Views 33
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On the plateau, a lot of people find the problem is training method, not ability. Short daily sessions of 10 to 20 minutes tend to beat one long weekend session. Character-by-character methods like Koch start at full character speed and add letters one at a time. That avoids counting dits and dahs entirely.

For the transition to real on-air copy, try listening to slow CW QSOs or practice files with the pencil down. Write only callsigns and numbers, then try words, then try nothing. If you miss a character, let it go and keep listening. Trying to work out what you just missed makes you miss the next three characters.

On filters, the right bandwidth depends on the band and your receiver's DSP. Try a wider setting on a quiet band, so you can hear nearby stations and tune accurately, and tighten it when the band is busy. Also set your sidetone pitch to something comfortable, since a harsh pitch is tiring over a long session.

  • Moderators

On the gear side, one thing to check with paddles is whether your keyer's dit/dah memory and iambic mode match how you squeeze. If you often get an extra dit or dah at the end of a character, try switching between mode A and mode B before blaming your hands. Also look at the paddle itself: contact gap and tension that are too tight cause accidental double elements, and gaps that are too wide cause fatigue.

For contests, the decoder and skimmer angle is worth a thought. In a contest, a skimmer-fed spot list can speed up finding multipliers, but the exchange itself still has to be copied correctly. Learn the contest's exchange format ahead of time, set up your function keys for CQ, exchange, TU and a repeat request, and keep the speed at what you can copy reliably, not what looks impressive. If a station asks for repeats, slowing down slightly often saves more time than sending the whole exchange again at full speed.

One safety note on QSK: if your radio has a QSK delay or an external amplifier, test it on a dummy load first and make sure the transmit/receive switching is clean before using it on the air.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.