Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a dual-band mobile install: FTM-500D vs ID-5100A vs TM-D710G, plus power wiring, noise and cross-band repeat

ci_cover.jpg

I'm starting a thread for anyone planning a 2 meter / 70 centimeter mobile install, or fixing one that isn't behaving. The three rigs that come up most for this kind of build are the Yaesu FTM-500D, the Icom ID-5100A and the Kenwood TM-D710G. All three are dual-band mobiles in the 50 watt class, but they differ in what they emphasize.

The FTM-500D is built around Yaesu's C4FM digital mode and WIRES-X access, alongside regular analog FM. The ID-5100A is the D-STAR option, with a touchscreen interface. The TM-D710G is the one to look at if APRS is the priority, since it has a built-in TNC and GPS. Before buying, check which digital mode your local repeaters actually use. A rig with a mode nobody nearby runs is just an analog radio with a premium price.

Here are some questions to get the discussion going:

1. Mounting: where does the radio body go, and where does the control head go? Under-seat, center console and dash mounts each have tradeoffs for airflow, reach and airbag clearance. Whatever you pick, the radio shouldn't become a projectile in a hard stop.

2. Power: do you run directly to the battery with a fuse near the battery terminal, or tap a fuse block? Whichever you choose, what wire gauge and fuse rating does the radio's manual call for, and how long is your run?

3. Noise: has anyone traced alternator whine, ignition noise or hash from LED lighting or a DC-DC converter, and what actually fixed it?

4. Cross-band repeat: which of these radios support it, how do you set it up, and what are the identification and licensing considerations? Please check the manual for your exact model and firmware rather than assuming. The feature isn't universal, and it's easy to buy a radio expecting it and then not find it in the menu.

5. Etiquette: what are your rules for operating while driving, and how do you handle a busy local repeater?

Please include your radio, antenna type and mount location when you reply, so the advice can be specific.

  • Replies 2
  • Views 31
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On power wiring, most of the mistakes come from a handful of shortcuts. A 50 watt mobile can pull a double-digit current draw on high power transmit, so a cigarette lighter socket is the wrong source. Those circuits are usually thin and shared with other loads, and the plug contacts add resistance that causes voltage drop. Run the positive lead to the battery or a properly rated distribution point, with the fuse as close to the source as practical. The fuse protects the wire, not the radio. If the wire were shorted between the battery and the first fuse, nothing would limit the current, which is why that distance should be as short as you can make it.

Use the fuse rating and wire gauge the radio's manual specifies, and don't swap in a bigger fuse because it keeps blowing. A blowing fuse means something is wrong: a short, a bad connector, or a polarity problem. Keep the fuses in both the positive and negative legs of the supplied cable if it came with them, and check the connectors for solid crimps. For the ground, a clean connection to battery negative is the most reliable approach. A chassis ground can work, but it's a common source of noise if the bolt has paint or corrosion under it.

For routing, keep the DC leads away from ignition and alternator wiring where you can, and use grommets wherever the cable passes through the firewall so the insulation doesn't chafe. Poor routing and poor grounding also tend to cause the noise problems people ask about later.

  • Moderators

On noise, the first thing to separate is whether it follows engine RPM or not. If the whine rises and falls with the engine, suspect the alternator or the power path. Check your ground and your power connections first, and consider an inline noise filter rated for the radio's current draw. If it's a steady buzz or hash that doesn't change with RPM, go looking for accessories: LED headlight or dash bulbs, USB chargers, dash cams and inverters can all radiate noise on VHF/UHF. Switching things off one at a time with the radio on an open channel is a simple way to find the culprit.

Don't overlook the antenna. A mag-mount on the roof or an NMO mount on a good metal surface is usually better than a poorly grounded trunk-lip mount, and a bad coax connection can cause both noise and a high SWR. Measure the SWR on both bands, since a 2 meter antenna that tests well can still be poor on 70 cm if the cable or the connector is damaged.

For cross-band repeat, treat it as a separate operating mode with its own rules. In the usual setup a handheld transmits on one band to the mobile and the mobile retransmits on the other. Keep the two frequencies on different bands so the radio isn't trying to hear itself, keep the handheld on low power when you're close to the vehicle, and make sure the ID requirements for your licence class are covered. Not every dual-band mobile offers the feature, so check the manual before relying on it. The TM-D710G is commonly associated with cross-band repeat, but confirm in the documentation for your specific rig.

As for etiquette, the safest policy is to keep calls brief, listen before transmitting, and pull over for anything that needs your attention. Many places have laws against holding a microphone while driving, so find out what yours say. A hand-mic habit that's fine in a parked car can be a ticket on the road.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.