Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a first SOTA activation: summit refs, points, kit choices, VHF vs HF, and logging

ci_cover.jpg

I'm putting together a checklist for people who want to try Summits on the Air, either as an activator or as a chaser. I'd like the thread to cover the practical details that tend to trip up beginners, so please correct or add to anything below.

Summit references. Every SOTA summit has a reference in the form association/region-number, for example W7W/KG-001. The first part is the association (W7W is Washington state), the two-letter part is the region within it, and the number is the summit's sequence in that region. Always confirm the reference, name, height and activation zone in the SOTA database before you leave, because lists get revised and older printed or cached lists can be out of date. When you spot, announce, or log, send the reference exactly as listed.

Points and bonus. Each summit has a point value based on its height, shown in the database. Some summits also carry a winter bonus, which applies only during that association's defined winter window and only to activators. An activation generally needs at least four QSOs to qualify for points. Check the current General Rules for exact limits, such as how often a summit can score in a year and what counts as the activation zone.

SOTAwatch. This is where activators post alerts (planned time, frequency, mode) and spots (live, on the air now). Chasers watch it to find activators. Post an alert ahead of time if you can, and use a spot when you are actually on frequency. Update the frequency if you move. A stale spot wastes everyone's time.

Kit. A lightweight HF setup is usually a QRP rig, a linked end-fed or a simple dipole on a lightweight pole, a battery, a key or mic, a pencil and paper, and a small logging sheet. VHF-only is a very reasonable starting point: a handheld with a better antenna (a roll-up J-pole, or a small Yagi if you want to be ambitious) can get the four contacts on many summits, depending on local activity. HF opens up more distance and more chasers but adds weight and setup time.

Safety. Treat the radio as secondary. Check the forecast, carry layers, water, a headlamp and a navigation backup, tell someone your route and expected return, and set a turnaround time. Do not put up a pole or wire on an exposed summit in lightning risk or high wind. No SOTA point is worth getting caught out.

Awards and logging. The Mountain Goat is the long-term activator award, based on accumulated activator points, and the Shack Sloth is the equivalent for chaser points. Both reward patience over speed. For logging, record UTC time, callsign, band, mode, and the summit reference on both ends for summit-to-summit contacts. Then upload your log to the SOTA database in the format it expects.

Questions for the thread: what would you leave out of a first-time kit, how do you decide between 2 m FM and HF for a given summit, and what logging method do you actually use on the hill?

  • Replies 2
  • Views 29
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On kit, I'd say start by working out what the summit needs rather than what you own. If there is plenty of local 2 m FM activity, a handheld with a decent antenna and spare battery may be all you need, and you can keep the pack light. If you want HF, 40 m and 20 m are the usual workhorses, with CW and SSB both in use, but check what the local chasers actually monitor and any band plan conventions where you are.

Two practical points. First, put the antenna setup on a short written procedure so you aren't improvising with cold hands. Second, decide your minimum viable activation: four contacts, a spot, then stop if the weather turns. If you also carry a small paper log, you have a backup if the phone battery dies in the cold.

  • Administrators

On logging, I'd keep the field log boring and the cleanup log careful. On the summit, write down UTC time, callsign, band, mode, and any summit ref the other station gives you. Don't try to do everything in a logging app with gloves on. At home, enter it into whatever program you use and then export it for the SOTA database. Check that your own summit ref, the date, and the callsign you used are correct before submitting, as errors are easy to make and annoying to fix.

For chasers, it helps to remember that you can also log summit-to-summit contacts when you are the one on a summit. Also, a quick spot check on SOTAwatch before you call helps avoid pileup confusion, especially when an activator has moved band or mode. If someone is chasing toward the Shack Sloth, it is mostly a matter of keeping a clean record over time, and the same is true for the Mountain Goat on the activator side.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.