Winlink over radio: choosing a mode, finding RMS gateways, and keeping message handling sane
- Replies 2
- Views 39
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Chad 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
This thread is a working checklist for getting Winlink Express talking over RF, and a place to compare notes on the setup decisions that usually cause trouble. It covers sound card versus hardware modems, gateway selection, passwords, forms, and when to use P2P instead of a gateway. Corrections are welcome, since details change between software versions.
How the pieces fit. Winlink Express is the Windows client. When you connect over radio, you reach an RMS gateway, a station with a radio, a modem and RMS software that is normally also connected to the internet. The gateway passes your traffic to the Common Message Servers (CMS), which hold your mailbox. Telnet sessions skip the radio and connect straight to the CMS over the internet. That makes Telnet the quickest way to confirm that your account, password and templates work before you blame an antenna.
Mode choice by band.
Packet (1200 or 9600 baud AX.25) is a VHF/UHF mode. You need a hardware TNC, or a software TNC such as Dire Wolf feeding Winlink Express through KISS or AGWPE-style connections. It is simple and widely used for local gateways, but slow and sensitive to collisions on busy channels.
VARA FM is a sound card modem for VHF/UHF FM. It is much faster than 1200-baud packet when the path is solid. VARA HF is the HF counterpart. Both run as separate modem programs that Winlink Express controls over local TCP ports, and the unregistered versions are speed-limited. Check the current VARA documentation for the exact limits and licensing.
ARDOP is a sound card mode with open specifications. It is usually somewhat slower than VARA HF but is a reasonable choice if you want a free, fully open option.
Pactor needs a dedicated hardware modem, and Pactor 3 or 4 requires a compatible controller. It is common on established HF gateways, so it is worth considering if you already own the hardware.
Sound card setup basics. Most failed sound card sessions come down to levels and rig settings:
Finding gateways. Winlink Express has a channel selection window for each session type. It uses a gateway list downloaded from the internet, so refresh the list while you still have connectivity. The list shows distance, and for HF it can show propagation estimates. Treat those as a guide, not a guarantee. Before connecting, listen to the frequency, because gateways do not all use the same offset convention, and check whether the frequency shown is a dial frequency or a center frequency for your rig setup. Do not use a gateway for casual testing if a Telnet or P2P test would do.
Passwords. Your Winlink account password is needed for CMS and gateway sessions. Keep it stored securely, and set up password recovery while you can still reach the internet. P2P sessions between two stations do not depend on the CMS, but you still need the other station's callsign, mode settings and a clear frequency.
Message handling. Compose to the outbox, connect, and the session sends and receives together. Keep messages short, especially on HF. Large attachments eat session time and increase the chance of dropped links. Radio-only handling matters when you want messages to stay on RF paths rather than being forwarded via the internet. Check the current Winlink documentation for how it is flagged and which recipients it supports. Messages sent to ordinary internet email addresses may be subject to filtering on the receiving side, so test important recipients ahead of time.
Forms and ICS-213. Winlink Express includes templates, including the ICS-213 General Message form. Forms are filled out in a local viewer and sent as small data attachments. Update templates while you have internet, and use the same template version as your served agency or net when possible. Agree beforehand on whether the receiver will see a rendered form or only the plain text.
Practice. Winlink Wednesday is a recurring exercise for sending test traffic. Check the current instructions from the organizers, since address and format details can change. Use it to test your whole chain: account, rig control, gateway selection, forms and a short message.
Questions for the thread: what is your preferred test order when bringing up a new station, and when do you choose P2P over a gateway?
Link to comment
https://www.hamradiobase.com/forums/topic/11276-winlink-over-radio-choosing-a-mode-finding-rms-gateways-and-keeping-message-handling-sane/Share on other sites