Operating etiquette checklist: CQ calls, breaking in, nets and shared frequencies. What else would you add?
- Replies 2
- Views 26
- Created
- Last Reply
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Most operating problems on the air come from a handful of habits, not from lack of technical knowledge. This is a starting list for newer operators, and I'd like the more experienced folks to fill in the gaps. Rules and band plans differ by country, so check your own regulator's rules and the current band plan for your region.
Listen first, longer than feels necessary. Before you transmit on HF, listen on the frequency for a while. Weak stations can be hidden under a strong one, and you may only hear one side of a QSO. Then ask "Is this frequency in use?" on phone, or send "QRL?" on CW. If anyone answers, move on. Don't argue over who was there first.
CQ calls. Keep them short and repeat them a few times: "CQ CQ CQ, this is (callsign) calling CQ and listening." Then stop and listen. A three-minute CQ with no gaps is hard to answer. If you want a specific mode, band or activity, say so, such as "CQ POTA" or "CQ DX." On VHF/UHF repeaters, a long CQ is usually unnecessary. Giving your callsign and saying you're monitoring or available for a call is more normal.
Breaking in. On a repeater, give your callsign in a gap between transmissions. If you have something urgent, say so clearly. On HF, wait for a pause and give just your callsign. Don't step on a QSO to say hello. Many operators use "break" only for urgent or emergency traffic, so avoid it for casual entry.
Rag chewing. A long relaxed conversation is a legitimate use of the bands. Courtesy still applies: leave gaps so others can join, don't hold a busy repeater for an hour, and move to simplex if the two of you are within range. Use the least power and the narrowest mode that gets the job done.
Callsign ID. Identify according to your licence conditions. In the US, for example, FCC rules require ID at the end of a communication and at intervals during it, but you should check the rules that apply to you. Giving your callsign clearly, with phonetics if conditions are poor, helps the other station log you correctly and shows you're a good neighbour on the band.
Nets. Listen to a few check-in rounds before you check in, so you know the format. Net control runs the show, so wait to be called, give your callsign (phonetics if asked) and any short message or traffic, then stand by. Don't talk on the net frequency between exchanges, and don't call net control directly unless you have priority traffic. If a net needs to clear a frequency for emergency traffic, drop everything and follow net control's directions.
Interference. Deliberate jamming isn't something you can fix by replying. Don't engage, don't retaliate, and don't give the jammer attention. Log what you can, move frequency if you need to, and report it through the channels your national society or regulator recommends. If you are the one causing interference, such as overdeviation, a noisy rig or splatter, take it seriously, check your settings, and fix it.
What would you add? I'm especially curious how people handle busy pileups, shared simplex calling frequencies and nets that run long.
Link to comment
https://www.hamradiobase.com/forums/topic/11285-operating-etiquette-checklist-cq-calls-breaking-in-nets-and-shared-frequencies-what-else-would-you-add/Share on other sites