Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Go-kit layers: what belongs in the radio bag, the vehicle kit, and the home plan?

ci_cover.jpg

Most go-kit threads turn into a gear list, and gear lists make it easy to buy things without ever testing them. A more useful way to think about it is in layers, each with its own job. Which layers are you building, and where are the gaps?

Layer 1: the grab-and-go HT bag. This should work with no setup. Put in the HT, a spare battery or an AA battery tray, a charging cable, a rubber-duck antenna plus a better one (a roll-up J-pole or a telescoping whip with a BNC adapter), a printed frequency list, a pen and notepad, and a small earpiece or speaker-mic. Print your local repeaters with offsets and tones, plus simplex options such as 146.520 and 446.000 MHz. Your phone may not have a signal, or may be dead, when you need that list.

Layer 2: the mobile and vehicle kit. A 50 W-class mobile on a magnet-mount or NMO antenna beats an HT by a wide margin on both transmit and receive. Wire it with Powerpoles, a fuse close to the power source, and a short pigtail you can run to a battery bank. Keep a basic dipole or end-fed wire in the same bag if you want HF. Don't forget a common-mode choke and some paracord to hang it with.

Layer 3: the home and grid-down plan. Think about what you do on day three, not hour one. That means a way to charge batteries, a plan for the household, and a plan for when you can't reach anyone. The test is whether someone who isn't a ham could use the written plan.

A few questions to start with: Do you run your kit off a single battery type, or a mix of AA, 18650 and LiFePO4? How are you handling the license-free services (FRS, MURS and GMRS) for family members who don't hold a ham ticket? And has anyone actually timed how long it takes to deploy their antenna in the dark?

  • Replies 2
  • Views 29
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On power, do the watt-hour math before buying anything, because the numbers settle a lot of arguments. A 12 V 20 Ah LiFePO4 battery is roughly 256 Wh. An HF rig that draws about 1.5 to 2 A on receive will run for many hours of listening. At 100 W on transmit it can pull 20 A or more, so that same battery drains quickly if you transmit often. SSB and CW have low duty cycles, which helps, and dropping to 20 to 50 W often costs you very little in practice. Digital modes with long transmit periods are harder on a battery.

For solar, a panel's rated watts are a best case. Angle, haze, temperature and wiring losses mean you should plan for well under the rating. A 100 W folding panel will not give you 100 W for most of the day. A charge controller matters too, and MPPT types usually harvest more than cheap PWM ones, especially when the panel voltage is well above the battery voltage. Check that the panel's open-circuit voltage stays inside the controller's limit, particularly on a cold day.

Test the whole chain at home: panel, controller, battery, fuse, rig. Cables, polarity and connector mismatches are the things that fail first. Label everything. Also check the airline and shipping rules for lithium packs if you ever fly with a kit, since they restrict capacity per battery.

For antennas, simple wins. A resonant dipole at a decent height and a good feedline will usually beat a clever compromise antenna. Write the cut lengths for your target bands on the bag itself.

  • Moderators

On the family side, the radio plan is only half of it. Set up an out-of-area contact everyone can reach, because during a regional outage it can be easier to send a text or call to someone far away than to reach someone across town. Agree on meeting points (home, neighborhood, and out of town), and on check-in times. Put it all on a wallet card with phone numbers, a frequency and channel plan, and a fallback if the first one fails.

For license-free radios, remember what each service is. FRS radios are simple and need no license, but they have limited range. GMRS needs an FCC license, and as I understand it, one license covers the licensee's immediate family. It allows more power and repeater use. MURS has five VHF channels, runs at low power, and is also license-free. Use whatever your actual family members will carry and operate. A radio nobody understands is just weight. If you assign a channel, write it down, and don't count on privacy codes: they only filter what you hear and don't keep anyone from listening.

A NOAA weather radio with SAME alerting and a battery backup is cheap and doesn't rely on cell service. Program in your county code and check it periodically. Many of them also run off AA cells, so they fit your battery plan. Many hams also carry a scanner or an HT that can listen to the weather channels.

For first aid, a store-bought kit is a starting point. Add a tourniquet and gloves if you have trained on them, personal medications, copies of prescriptions, water purification tablets or a filter, and a few days of food and water. If you plan to support a served agency or net, find out whether they have their own requirements for ID, training and check-in before you show up with your kit.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.