Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Where do I actually operate? Band plan vs. FCC privileges, band edges, 60 m channels, and VHF/UHF calling frequencies

ci_cover.jpg

Question for the group: what is the cleanest way to think about the difference between the FCC rules and the ARRL band plan? I keep seeing frequency charts that show license-class privileges, mode segments, calling frequencies and international differences all at once, and I can't tell which parts are legally binding and which are only convention.

Specific things I'd like sorted out: (1) how to pick a spot on 160 through 10 meters without wandering out of my privileges, (2) how close I can safely put my dial frequency to a band edge on SSB, (3) how 60 meters differs from the other HF bands, and (4) which simplex and weak-signal calling frequencies to know on 6 m, 2 m, 70 cm and 33 cm. Please check any numbers against the current FCC rules (Part 97) and the current ARRL band plan, since both can change.

  • Replies 2
  • Views 30
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start with the split. The FCC rules (Part 97, mainly 97.301 for which frequencies each class can use and 97.305 for which emission types are allowed where) are law. The ARRL band plan is a voluntary agreement about how to share the space inside those limits. Nobody can be cited for running SSB in a spot the band plan reserves for narrow digital, but you'll be unpopular and probably get little out of it. Run a mode where the regulations forbid it, or transmit outside your class's frequencies, and that is a violation.

The HF structure is the same on almost every band. CW and narrow data modes sit at the bottom, a mixed or wider-data region follows, and phone sits at the top. Licence classes then carve that up. Roughly, under current US rules: Technicians get CW-only privileges on parts of 80, 40 and 15 m, plus 10 m from 28.000 to 28.500 MHz, with CW/data in the lower part and SSB phone above 28.300, all at 200 W PEP on HF. Generals get all of 160, 30, 17, 12 and 10 m, and large portions of 80, 40, 20 and 15 m. Extras get everything, including the segments at the very bottom of the phone and CW sections that Generals can't use. Typical General phone starting points are 3.800 on 75 m, 7.175 on 40 m, 14.225 on 20 m, and 21.275 on 15 m. Those are worth memorizing because they are where many new Generals accidentally step out of privileges. 30 m (10.100 to 10.150) is CW/data only and limited to 200 W. 17 m and 12 m have no Extra-only sections, so they are the easiest to get right. Legacy Novice and Advanced licenses are no longer issued, but existing holders keep the privileges they had, so you will occasionally hear operators in segments that no current new license class uses.

On band edges, remember that your dial frequency is not where your signal sits. In SSB with the suppressed carrier, the signal occupies roughly 2.5 to 3 kHz beside the dial frequency. On LSB (conventional below 10 MHz), the audio extends below the dial, so if you sit at 3.800 on LSB, part of your signal is below 3.800 and out of General phone privileges. Put the dial at around 3.803 or higher to be safe. On USB (conventional above 10 MHz), the signal extends upward, so at the top edge, say 14.350, you want your dial at around 14.347 or lower. Rule of thumb: keep the whole occupied bandwidth inside the edge, not just the dial readout, and leave a bit more margin if your radio's display is not well calibrated or you use a wide filter or a processor.

A few segment hints on the HF digital side. FT8 is a convention, not a regulation, and it clusters around well-known dial frequencies (USB): about 1.840 on 160 m, 3.573 on 80 m, 7.074 on 40 m, 10.136 on 30 m, 14.074 on 20 m, 18.100 on 17 m, 21.074 on 15 m, 24.915 on 12 m and 28.074 on 10 m. These sit inside the digital portions of the band plan. Stay off 14.100 on 20 m (beacons) and look for the narrow-mode areas before running anything that stays on the air for a long time. On 160 m, CW/digital tends to be at the bottom and phone starts around 1.843 and up, but check the current band plan for the DX window details.

  • Administrators

Adding the pieces that tend to trip people up beyond the main HF bands.

60 meters is the exception to "pick any spot in a segment." In the US it is not a continuous band but five discrete channels, available to General and above, and they are shared on a secondary basis with other users. The channel dial settings (suppressed-carrier USB) are 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz. The channel centers are 1.5 kHz above those, which is why you will see two sets of numbers depending on whether the source lists the carrier frequency or the center. USB is the voice convention there, and CW and certain digital modes within the channel bandwidth are also allowed. There is also a power limit expressed as ERP relative to a half-wave dipole, rather than the usual PEP figure, so check the current rule text before you transmit, especially with an antenna that has gain or loss. Internationally, 60 m is a patchwork. A worldwide secondary allocation was added at 5351.5 to 5366.5 kHz, but individual countries implement it differently, so the US channels do not map cleanly to what operators elsewhere can use.

Which brings up the ITU regions. The US is in Region 2, and a lot of band-edge differences between countries come from that. For example, 80 m is 3.5 to 4.0 MHz in Region 2 but only 3.5 to 3.8 in Region 1. 40 m is 7.0 to 7.3 in Region 2, but only 7.0 to 7.2 in Regions 1 and 3, and above 7.2 there are international broadcast stations, which is why US phone operators near 7.2 and above sometimes hear them at night. 2 m is 144 to 148 MHz in the US but only 144 to 146 in Region 1, and 70 cm is 430 to 440 there instead of 420 to 450. 33 cm (902 to 928 MHz) is allocated only in Region 2, and in the US it is shared with Part 15 devices and other services, so amateurs have secondary status and noise is common. If you are travelling or talking to stations overseas, find out what they can legally use, and check whether you need a reciprocal permit or something like a CEPT arrangement.

For simplex calling, these are the ones to remember. On 6 m, the SSB/CW weak-signal calling frequency is 50.125 MHz, and the FM simplex calling frequency is 52.525. On 2 m, 146.52 is the national FM simplex calling frequency, 144.200 is the SSB/CW weak-signal calling frequency, and 144.390 is the North American APRS frequency. On 70 cm, 446.000 is the national FM simplex calling frequency, and 432.100 is the weak-signal calling frequency. On 33 cm, 903.100 is widely cited as the weak-signal calling frequency, and the ARRL band plan lists the other segments. On 10 m, 29.600 is the FM simplex calling frequency. Calling frequencies are for making contact and then moving off to another frequency, not for a long conversation, so QSY once you've made contact.

One last point on 2 m and 70 cm: the band plan separates repeater inputs and outputs (offsets are typically 600 kHz on 2 m and 5 MHz on 70 cm in the US) from simplex and weak-signal segments. A repeater output frequency looks identical to a simplex one on your radio's display. Check your local coordination or the repeater directory before you assume a frequency is open, and keep weak-signal and satellite sub-bands free of FM.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.