Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Getting started with SOTA: summit references, activator vs. chaser points, and a sensible first kit

ci_cover.jpg

I'd like to collect some practical thinking in one thread for people who are curious about Summits on the Air but haven't committed to a first activation or a first chase. SOTA is easy to describe and has plenty of small details that trip people up, so let's go through them.

Start with summit references. A reference like W7W/KG-001 has three parts: the association (W7W, the Washington association), the region within it (KG), and the number of the summit in that region. Your log, your spot and the contact you make with a chaser all hang on that string, so it pays to copy it straight from the SOTA database and not retype it from memory. The database lists each summit's points value, coordinates, elevation and activation zone. The activation zone is the area within 25 vertical metres of the summit, and you have to operate from inside it for the contacts to count.

On points: summits are worth 1 to 10 points depending on height. Some associations also run a winter bonus for activations during that association's defined winter season, and it applies to activators, not chasers. To qualify a summit as an activation you need at least four contacts. Activators can claim a given summit once per calendar year. Chasers also collect the summit's points, once per summit per year, for working an activator. Summit-to-summit contacts (S2S) count for both stations, which is why some people watch for other activators and not just home stations.

The awards follow from that. Mountain Goat is for activators and is built on accumulated activator points, with 1000 as the target. Shack Sloth is the chaser equivalent, also 1000 points, earned without leaving the shack. Neither one is a race, and plenty of people work toward both over years.

On the operating side, SOTAwatch is where alerts and spots live. An alert says when and roughly where you plan to be on the air, including band and mode. A spot goes up when you are actually on frequency, and that is what most chasers react to. Self-spotting is normal and accepted, and many chasers tune around the posted frequency before they ever hear you call.

For first kits, the usual split is VHF FM versus HF. A handheld with a better antenna than the stock rubber duck, such as a roll-up J-pole or a small Yagi, can get you the four contacts on a popular summit if local activity is decent. HF with CW or SSB opens a far wider chaser pool but means more gear: a compact rig, a battery, an end-fed half-wave or a linked dipole, and a lightweight mast. Keep things simple at first and put the saved weight into water, clothing and food.

Logging is where people lose points. Record UTC date and time, frequency, mode, the other station's callsign, your summit reference, and the chaser's or other activator's summit reference where applicable. Paper in a pocket is fine as a backup, but have a plan to enter everything into a log file you can upload to the SOTA database later.

Safety deserves its own line in any SOTA discussion. Check the forecast and the land manager's rules, tell someone your route and your turnaround time, carry layers and a light, and leave the summit early if there is lightning in the area or conditions change. A contact is never worth the risk, and the points will still be there next time.

Questions to kick things off: what would you put in a first-time VHF kit, how do you decide between HF and VHF for a given summit, and what logging method keeps your post-hike data entry painless?

  • Replies 2
  • Views 25
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first VHF kit, I'd keep it to a handheld, a decent antenna, a spare battery and a printed copy of your alert details. The antenna matters more than the radio. A rubber duck on a ridgeline often works, but a small directional antenna or a roll-up J-pole held up high makes the difference between calling into silence and getting answers. On a typical FM setup, announce yourself on the national simplex calling frequency or whatever frequency you listed in your alert, then move off it once someone answers so you don't tie it up.

For the four-contact rule, send a clear alert and a spot, and keep calls short. Something like 'CQ SOTA, this is [call] on [summit reference]' is enough. The reference matters because chasers searching spots and logs need it exactly right. Also check the SOTAwatch alert page before you go for other activators nearby; S2S contacts on VHF are possible when two summits have line of sight.

  • Moderators

The HF versus VHF decision mostly comes down to terrain and how much weight you want to carry. VHF FM is quick to set up and fine when you know there is local chaser activity. HF gives you reach, and CW in particular is efficient on QRP power for a small battery. A common lightweight HF approach is a compact transceiver, a linked or multiband end-fed wire, and a short pole to hold the center or far end up. The usual bands are 40, 30 and 20 metres, and which is best depends on time of day and distance to your chasers.

On logging, one habit that saves time is writing down the chaser's callsign and any summit reference at the moment of contact, not trying to reconstruct it afterward. Then, back home, put the whole activation into a CSV that matches the SOTA database upload format and check it before submitting. Typos in a call or summit reference are the usual reason a contact doesn't match. And for chasers: log the activator's reference with every contact, because points and your Shack Sloth progress depend on getting that right.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.