Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Before you key up a new repeater: offsets, tones, linking and etiquette checklist

ci_cover.jpg

This thread is meant as a working checklist for someone who has just programmed a repeater into a radio, or is about to. It also covers where people usually go wrong. Please add corrections and local variations, because repeater practice differs a lot between regions and countries.

Start with the basics. A repeater listens on one frequency (its input) and retransmits on another (its output). Your radio transmits on the input and receives on the output, so you program the output as your receive frequency, plus an offset and a direction. Common defaults in North America are 600 kHz on 2 m, 5 MHz on 70 cm, 1.6 MHz on 1.25 m and 1 MHz on 6 m. The direction (+ or -) often depends on where the output sits in the band plan. Other regions use different values; IARU Region 1 70 cm repeaters typically use 7.6 MHz, for example. Don't rely on your radio's automatic offset feature without checking it against a listing.

Next, tones. Most repeaters need a CTCSS (sub-audible) tone on your transmit signal before they will open. Motorola's brand name, PL, is still widely used for the same thing. Some systems use DCS instead, which is a digital code written as something like D023N. Two settings get confused constantly. "Tone" (encode only) sends a tone so the repeater will accept you. "Tone squelch" (decode) makes your own receiver stay muted until it hears the right tone. The tone the repeater expects from you is not always the tone it sends on its output, so check both.

Lastly, find out whether the repeater is open or closed, and whether it is linked to anything (EchoLink, IRLP, AllStar, Wires-X, a DMR talkgroup, a D-STAR reflector). That changes how you should behave on it.

Questions for the thread: what do you check first when you hit a repeater that won't open, and what do you wish new users knew about linked systems?

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

When a repeater won't respond, I'd work through these in order, because the cause is usually simple.

First, confirm you are actually hearing the output. If you can't hear anyone, you may be out of range or on the wrong frequency. Many radios have a reverse (REV) function that lets you listen on the input. If you hear a local station clearly on the input but they are weak on the output, you are probably close enough to talk simplex and don't need the repeater.

Second, check the offset direction and the tone value. A tone that is off by one entry in the CTCSS list (for example 100.0 versus 103.5) will keep the repeater closed. Remember that a repeater can use different tones for input and output. If you also turned on tone squelch with the wrong output tone, you'll hear nothing at all and may assume the repeater is dead.

Third, check access. Some repeaters are open to any licensed amateur, with the owner still setting the rules. Others are closed or limited to club members, or require a specific tone that is only given to members. A closed repeater isn't being rude; the licensee is entitled to limit access, and some are closed to cut interference or abuse. Check the club page or contact the trustee rather than hunting for the tone yourself.

On directories: RepeaterBook and club sites are handy, but entries go stale. A repeater can change its tone or go off the air without the listing being updated. In the US, repeaters are typically coordinated by a regional frequency coordinator. If two repeaters interfere, the coordinated one generally has priority in a dispute, which is one reason clubs bother with coordination. Check the date or notes on a listing and, if you can, confirm it with the owner.

  • Moderators

On linked systems, the biggest thing is that you may be talking to far more people than the local frequency suggests, and delays can be long. Here is how the main ones differ.

EchoLink connects through the internet to PC, phone and repeater nodes. Repeater nodes usually carry an -R suffix and simplex link nodes an -L, and users must be validated amateurs. IRLP is a separate VoIP system for repeater and simplex nodes, controlled with DTMF commands and node numbers. AllStar Link is based on Asterisk and links nodes by node number, and many hubs or networks are built on it. Wires-X is Yaesu's system for System Fusion (C4FM) repeaters and nodes, organized around rooms.

DMR and D-STAR work differently from analog FM linking. DMR uses two timeslots per channel, color codes, and talkgroups. The talkgroup you key decides where your audio goes, so programming the wrong talkgroup or timeslot can put you on a busy network instead of the local channel. D-STAR routes by callsign and uses RPT1, RPT2 and UR settings, plus gateways and reflectors. Many new D-STAR users get stuck on those routing fields rather than on frequency and tone.

For etiquette, a few habits help everywhere. Listen before you transmit and give your callsign clearly. Leave a longer pause between overs on linked systems so others can break in, and especially so people connected through delays or a slow link can join. Keep transmissions short and mind the time-out timer, which varies by repeater and is there to stop a stuck or long-winded transmission. Don't wait for the timer to run down before you unkey. Don't kerchunk to "test" the repeater; say your callsign instead. And don't send control commands (DTMF) on a repeater you haven't read the rules for, since the owner may restrict link commands.

Finally, if you are only a mile or two from the person you want to talk to, move to simplex. That keeps the repeater clear for people who actually need it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.