Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

How do you combine SFI, K-index, WSPR and beacons to decide whether a band is worth trying?

ci_cover.jpg

Propagation tools can disagree. The SFI looks healthy, the K-index is quiet, and VOACAP says 15 m should be open to a given region, yet the band sounds empty. Or the numbers look mediocre and a path opens anyway. I'd like to compare how people turn the data into a decision about where to operate, so here is a rough framework to pick apart.

Slow indicators (planning). The 10.7 cm solar flux index (SFI) is a proxy for the ionizing radiation that builds the F layer. Higher SFI generally means a higher MUF on F2 paths, so the upper HF bands (15, 12, 10 m) are more likely to support long-distance paths. The sunspot cycle sets the long-term backdrop, and VOACAP-style predictions use a smoothed sunspot number to give monthly median results. That makes them good for asking when a path is usually possible, and weak for asking whether it is open right now.

Fast indicators (is something wrong today). The K-index is a 3-hour measure of geomagnetic disturbance, and the A index is a daily summary. Elevated values, especially on high-latitude paths, often mean degraded or flutter-affected signals, and a major storm can wipe out polar routes. Solar flares can also cause sudden D-layer absorption on the sunlit side of the Earth. This is why the low bands and lower HF can drop out in the middle of the day while the numbers elsewhere look fine.

Real-time evidence. This is where I'd like to hear how others weight things. The NCDXF/IARU beacons on 14.100, 18.110, 21.150, 24.930 and 28.200 MHz share a repeating 3-minute schedule, and each beacon steps down in power from 100 W to 10 W, 1 W and 0.1 W. Hearing the lower power steps tells you about margin, not just whether the band is open. WSPR spots on wsprnet and the Reverse Beacon Network and PSK Reporter maps show actual paths, but each only shows what that station, antenna, mode and receiver combination could do. A WSPR spot at a very low SNR does not mean SSB is workable.

For local and regional work, the same logic applies at a different scale. NVIS depends on the critical frequency (foF2). You want to stay below it so signals return at a steep angle, which often means 40 or 60 m by day and 80 m at night or when solar activity is low. VHF has its own set of triggers: sporadic E (seasonal, and not strongly tied to SFI) and tropospheric ducting (weather-driven, tied to inversions and high pressure).

Question for the thread: what is your checklist before you call CQ or start a scheduled run? Do you trust SFI/K first, or go straight to beacons and spots?

  • Replies 2
  • Views 24
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For HF I'd flip the order and check observations first, then use the indices to explain what you see. A quick pass could be: listen to the NCDXF beacons on 20 and 15 m and note which ones are audible and at which power steps. Then look at WSPR or PSK Reporter for your own area to see which paths are active. Only then check K and the flare/radio blackout reports if something looks odd.

The reason is that SFI is a single global number, while propagation depends on your path: the latitude it crosses, whether it is in daylight or darkness, and the geometry of the gray line. A decent SFI says nothing about whether the D layer is absorbing at your end this minute.

One caution on WSPR: it is a great band-opening detector, but remember it runs at very low power and decodes at a very low SNR. If your station is hearing spots at -25 dB, that does not give you the margin for a casual SSB QSO. I'd treat it as a yes/no for the path, and the beacon power steps as a better guide to the margin you have.

  • Moderators

On the VHF side, the numbers matter less. Sporadic E is mostly a seasonal pattern in the northern hemisphere, with a main peak around early summer and a smaller one in midwinter. It does not track SFI in any simple way. The practical approach is to watch 10 m and 6 m for the first signs of an opening: a few scattered, fast-fading signals on 10 m often means 6 m may follow. Beacons in the 28 MHz and 50 MHz segments are useful for that, as are spot maps for 6 m.

Tropo ducting is a different animal. It comes from weather: temperature inversions, stable high pressure, and paths over water or flat terrain. The signs are steady, long-lasting signals from stations that are normally out of range, rather than the fast QSB of Es. Forecast maps based on refractivity can help, but the quick test is listening to distant repeaters and beacons on 144 and 432 MHz and noticing when they stay up.

For NVIS, the point to add is that low solar activity can push foF2 down enough that 40 m goes long in the daytime. The practical fix is often to drop to 80 m, or 60 m where it's available. If the plan is a regional net, I'd run a VOACAP point-to-point for planning and then check actual conditions with a few test contacts at different times.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.