Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Technician to General: how should I split study time across Element 3, and what do I need to know about HF sub-bands?

ci_cover.jpg

I'm a Technician planning to upgrade to General. I know Element 3 is 35 questions drawn from the public question pool, and I understand I need 26 correct to pass. What I don't have is a plan for where to spend my time.

Several things look like they could eat a lot of study hours:

1. HF band edges and sub-bands. Do I need to memorize every frequency segment, or are there shortcuts?
2. Propagation (MUF, D layer, gray line, solar indices) and antenna basics (dipole length, SWR, feed lines).
3. The electrical principles questions: Ohm's law, power, dB, resonance.
4. Digital modes and operating practices, including what is legal and what the exam expects.
5. Vanity call signs, and whether any of that is on the test.

How would you order these, and is it better to study by topic or just drill practice exams? Corrections to anything I've got wrong are welcome.

  • Replies 2
  • Views 30
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

A note on the numbers first: with 35 questions and 26 needed, you can miss 9. You don't have to master everything, but you do need to avoid a weak area dragging you down. The pool is organized into subelements, and each exam draws a fixed number of questions from each, so a topic you skip can't be offset elsewhere. Look at the current question pool's subelement breakdown, because the pool is revised on a multi-year cycle and the numbers can change.

A study order that tends to work for Technicians:

Start with the material that builds on what you already know. Operating practices, rules, and safety (RF exposure, grounding) are mostly vocabulary and rule recognition. Since you passed Technician, much of this will feel familiar. Use these to build momentum.

Do electrical principles in short, repeated sessions. The calculation questions use a small set of formulas. Ohm's law is E = I × R, power is P = E × I, and P = E²/R is easy to forget. For decibels, 3 dB is roughly double the power and 10 dB is ten times. If you can do these with the exam calculator, it's a quick-win section. Resonance and filter questions are more conceptual: know what happens to impedance and current in a series versus parallel resonant circuit.

Treat propagation as a story, not a list. The D layer absorbs lower HF during the day and mostly disappears at night, which is why 160 and 80 meters open up after dark. Higher bands like 15 and 10 meters depend on the F layer and enough ionization, which follows the solar cycle. Know the MUF (maximum usable frequency), the skip zone, and what solar flux and the K and A indices tell you. Once you have the cause-and-effect, the questions get much easier than if you memorize each answer.

For antennas, learn a few anchor facts. A half-wave dipole is about 468 divided by the frequency in MHz, in feet, so around 33 feet for 14.2 MHz. A quarter-wave vertical needs a good radial or ground system. SWR measures mismatch, and coax loss rises with frequency. Don't memorize the exact answers; understand why they are what they are.

Vanity call signs are barely tested, if at all. They're worth knowing about after you upgrade, but they shouldn't take study time now.

Method-wise, I'd alternate: read or watch a short topic explanation, then do practice questions on that topic, and only later do full 35-question simulated exams. Aim for a consistent score comfortably above the pass line before you schedule the session.

  • Administrators

On the HF sub-bands: you don't need to memorize every edge in the whole regulation, but you should know the pattern, because the exam asks in ways that reward it.

The big idea is that General gets access to all the HF amateur bands, with segments reserved for Amateur Extra near some band edges. Compared with Technician, which only has CW on small parts of 80, 40 and 15 meters and limited 10 meter privileges, General is a large step up. Rather than learn raw numbers, build a mental picture for each band: where the CW/data portion is, where phone begins, and which bands are narrow special cases.

Special cases worth tagging: 60 meters uses specific channels rather than a continuous band, with its own power and mode restrictions. 30 meters is CW and data only, with a lower power limit than the other bands. 17 and 12 meters are small bands, and you can operate phone there as well as CW and data. Check the FCC Part 97 privilege chart or the ARRL band chart for exact frequencies before the exam, and use the same chart when you're actually on the air. Band plans and the legal limits aren't the same thing, so don't assume a gentleman's agreement is a rule, or vice versa.

For digital modes, the exam leans on rules and concepts. Know that data emissions on HF are limited to specific segments, and that there are symbol-rate limits: below 28 MHz the limit is 300 baud, and the limit goes up on higher bands. Understand the difference between modes at a conceptual level: FT8 and similar weak-signal modes use timed transmissions and need accurate computer time, PSK31 is a narrow keyboard mode, and RTTY is the classic FSK mode. Know that the sound card interface and audio level matter, since overdriving causes splatter. Also be ready to explain why you wouldn't run high power on a narrowband digital mode. Common watering-hole frequencies like 14.074 MHz for FT8 are conventions, not regulations.

For vanity calls: once you upgrade, you can keep your current call sign or apply for a different one. Which call sign groups you can pick from depends on your license class, and General gives you more options than Technician does. It isn't something to study for the test. After the upgrade, read the FCC's vanity call sign information and check availability in the database before applying. Fees and processing details change, so don't rely on a forum post for those.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.