ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Technician to General: how would you split study time across the 35 Element 3 questions?
I'm planning to upgrade from Technician to General and trying to build a study plan before I start working through practice exams. Element 3 is 35 questions drawn from the General pool, and as I understand it you need 26 correct to pass. The pool is organized into subelements covering the privileges and band plan, propagation, antennas and feed lines, electrical principles, digital modes, operating practices, and rules.
Here's where I'm stuck:
1. The HF sub-band edges (CW/data vs. phone segments on 80, 40, 20, 15 and 10 meters) look like pure memorization. Is there a better way to learn them than flash cards?
2. Propagation and antenna questions seem to ask about concepts like MUF, D-layer absorption, gray line, and velocity factor. How deep do I need to go on the math?
3. Electrical principles worries me most. Ohm's law and power I can handle, but reactance, resonance, RMS vs. PEP and decibels are less comfortable.
4. Does it make sense to think about a vanity call sign while studying, or is that a separate step after the upgrade?
If you were laying out three or four weeks, what order would you study in, and what would you put the most time into?
I'm planning to upgrade from Technician to General and trying to build a study plan before I start working through practice exams. Element 3 is 35 questions drawn from the General pool, and as I understand it you need 26 correct to pass. The pool is organized into subelements covering the privileges and band plan, propagation, antennas and feed lines, electrical principles, digital modes, operating practices, and rules.
Here's where I'm stuck:
1. The HF sub-band edges (CW/data vs. phone segments on 80, 40, 20, 15 and 10 meters) look like pure memorization. Is there a better way to learn them than flash cards?
2. Propagation and antenna questions seem to ask about concepts like MUF, D-layer absorption, gray line, and velocity factor. How deep do I need to go on the math?
3. Electrical principles worries me most. Ohm's law and power I can handle, but reactance, resonance, RMS vs. PEP and decibels are less comfortable.
4. Does it make sense to think about a vanity call sign while studying, or is that a separate step after the upgrade?
If you were laying out three or four weeks, what order would you study in, and what would you put the most time into?
Link to comment
https://www.hamradiobase.com/forums/topic/11598-technician-to-general-how-would-you-split-study-time-across-the-35-element-3-questions/Share on other sites