Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a dual-band mobile install: FTM-500D vs ID-5100A vs TM-D710G, wiring, noise and cross-band questions

ci_cover.jpg

I'm planning a first proper 2 m / 70 cm mobile install and have narrowed the choice to three radios: the Yaesu FTM-500D, the Icom ID-5100A and the Kenwood TM-D710G. All three are 50 W-class dual-band FM mobiles with detachable control heads. They differ in digital modes, APRS and cross-band features.

Here is how I understand the differences so far. Please correct me where I'm wrong.

The Yaesu is the C4FM/System Fusion option, with analog FM as well. The Icom is the D-STAR radio, with a large touchscreen and dual receive. The Kenwood is the analog-FM, APRS-oriented one, with a built-in TNC and GPS. If you don't care about a particular digital mode, the choice seems to come down to local repeater activity, APRS needs, and how each radio's menus feel to use while parked.

My questions:

1. Cross-band repeat. I'd like to use a handheld from outside the vehicle and have the mobile retransmit on the other band. Which of these radios actually support it? My recollection is that the Kenwood does, but I'm not sure about the other two, and I'd rather confirm before buying.

2. Power wiring. Should I run straight to the battery with a fuse at the battery end, or tap the fuse box? I've seen both done.

3. Noise. What are the usual suspects for alternator whine or ignition hash on 2 m and 70 cm, and what is the right order of troubleshooting?

4. Mounting. Roof NMO is ideal, but I'm not sure about the head and body placement inside the cabin so that nothing gets in the way of airbags or the driver.

5. Etiquette. What are the unwritten rules for operating while driving, apart from the legal ones?

  • Replies 2
  • Views 18
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'll take the cross-band and power wiring questions, since they cause the most expensive mistakes.

On cross-band repeat, don't rely on forum memory or spec-sheet summaries. Open the current manual for the exact model and version and search for "cross-band repeater" or "repeater function". Of the three, the TM-D710G is the one commonly described as having it, but check it against the manual you'll actually own. It's a feature that disappears from marketing pages and is easy to assume wrongly. Operationally, the mobile receives on one band and retransmits on the other, so your handheld is effectively using the mobile's antenna and power. You are still the control operator, so identify as your rules require, and pick frequencies that don't land on an active repeater input or output in your area. Duty cycle matters too: a 50 W radio retransmitting for long periods in a parked car can get hot, so make sure the heat sink has airflow.

On power, the usual advice is a dedicated run from the battery, not the accessory socket. Take the positive lead straight to the battery with an inline fuse holder close to the battery terminal, within a few inches. The fuse protects the wire, so if the wire is damaged anywhere along its length, the fuse is what limits the fault current. Use the wire gauge and fuse rating given in the radio's manual, and don't substitute a bigger fuse because it keeps blowing. If it keeps blowing, something is wrong. A 50 W FM mobile can draw on the order of 10 to 12 A at full transmit, but the manual is what counts for your fuse and gauge. Use a grommet where the wire passes through the firewall so the insulation isn't chafed, and avoid running it next to ignition wiring or tight against sharp edges.

The negative lead can go to the battery negative as well, which is the cleanest reference. A bolt on a random chassis point can work, but it is a common source of both noise and voltage drop.

  • Moderators

Adding to the noise, mounting and etiquette side.

For noise, work from simplest to hardest. First determine what kind it is. Whine that rises and falls with engine RPM is usually alternator or charging-system related. A ticking that follows RPM is typically ignition. Hash that doesn't change with engine speed often comes from something added to the vehicle, such as LED lighting, USB chargers, dash cams or DC-DC converters. Test by switching accessories off one at a time and see whether the noise changes. Also check the squelch is set above the noise floor, and test with the engine off, then running, then with accessories on. On FM, a noisy received signal on 2 m or 70 cm is often something you can pin down this way. Fixes include a clean power run directly to the battery, a good ground, ferrite chokes on the offending device's cable, and replacing a poor cheap charger. Add filtering only after you've identified the source.

For mounting, a roof-center NMO mount usually gives the best antenna performance on VHF/UHF, because the metal roof acts as a ground plane. The coax goes in through a door or trunk seal with a purpose-made pass-through or flat jumper, not pinched. Tune or at least check SWR on both bands with a meter, preferably an antenna analyzer. Mount the radio body or head so nothing obstructs the airbag deployment path, so cables cannot snag the pedals, and so you can operate it without looking down for long. Keep the antenna and the radio's transmit power away from people's heads as sensible RF exposure practice.

On etiquette, the legal side varies by location. Some places restrict handheld devices or require hands-free use. Beyond that, the common-sense rules are: keep transmissions short, don't start a conversation in heavy traffic, let a passenger operate the radio if you need to change settings, and be ready to drop out of the QSO if you need to concentrate on driving. On a repeater, listen first, leave a pause between overs, and say your callsign clearly. If you want a contact, saying "mobile" with your callsign is a normal way to announce yourself. Check your local band plan before using a simplex calling frequency, and move off it once the other station answers.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.