Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Building a Layered Go-Kit: Ham, GMRS, MURS, FRS and the Plan That Ties Them Together

ci_cover.jpg

Many go-kit discussions turn into a gear list, but the radios are only one piece. The kit has to be portable, powered, usable by the people who might need it, and tied to a plan everyone knows. Here is one way to think about it in layers, with questions at the end I'd like to hear other people's takes on.

Layer 1: the grab-and-go bag (minutes to deploy). This is the bag you can pick up on the way out the door. A typical contents list: a dual-band HT with a spare battery or an AA/AAA battery case, a better antenna than the stock rubber duck (a roll-up J-pole or a telescoping whip with a BNC or SMA adapter, depending on your radio), a short coax jumper, a printed card of local repeaters, simplex frequencies and net times, a pen and a waterproof notepad, a weather radio, a headlamp, and a small power bank. Keep the radio programming simple. A numbered channel list that you can find without a menu dive is worth more than 200 memories you can't navigate while stressed.

Layer 2: the vehicle or mobile kit. A 25 to 50 W mobile rig gives you more reach than an HT, but it also draws real current. A 50 W FM transmitter at full power can pull roughly 10 to 12 A at 13.8 V, so wire gauge, fusing and a clean power connection matter. Anderson Powerpoles are a common standard in ham emergency circles because kits and batteries can be swapped quickly with matching polarity. Keep a magnetic-mount or NMO antenna with the kit, and a short length of coax if you want to place an antenna away from the vehicle.

Layer 3: the home or shelter station. This is where a battery bank and solar come in. The basic math is watt-hours: volts times amp-hours. A 12 V, 50 Ah battery holds about 600 Wh nominal, but you won't use all of it, and receive-only time is very different from transmit time. Work out your own duty cycle. Most operators spend far more time listening than transmitting. If you add solar, use a proper charge controller matched to the battery chemistry. Don't connect a panel straight to a lithium battery and hope for the best. Also check the manufacturer's cold-charging limits for lithium batteries, because charging below freezing can damage some cells.

Antenna kit. The best radio is limited by its antenna. A small bag with a dipole or end-fed wire, a few lengths of paracord, a light throw weight, a coax choke, an SWR meter or antenna analyzer, and adapters (PL-259 to BNC, SMA, and so on) covers a lot of situations. For VHF/UHF, getting the antenna higher and clear of buildings usually helps more than adding power.

The non-ham services. FRS, GMRS and MURS are useful for family and neighborhood coordination because not everyone holds a ham license. In the US, FRS needs no license. GMRS requires an individual license, which covers the licensee's family members, but no exam. MURS needs no license and has five VHF channels around 151 and 154 MHz. None of these are private, and none are guaranteed to be monitored by anyone in an emergency. Treat them as short-range tools, not a lifeline.

The plan. Decide ahead of time who calls whom, on what channel, and when. Include an out-of-area contact, because it can be easier to relay through someone outside a disrupted region. Pick rally points, and write the plan down on a card, not just in your head.

First aid and supplies. Keep a real first aid kit alongside the radios: bleeding control supplies, gloves, dressings, tape, any personal medications, and written notes about allergies or conditions. Take a hands-on first aid class so the kit is something you can actually use. Add water, food, spare clothing, a copy of important documents and cash in small bills.

What does your layer 1 bag hold, and what would you remove if you had to cut weight? And do you test the whole setup on batteries only, rather than from the wall, before you trust it?

  • Replies 2
  • Views 12
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

One thing I'd add on the power side: test your kit under load, not just on the bench. Put the radio on the battery you plan to use, key it at the power level you expect to run, and watch the voltage. Some small batteries sag enough under transmit that the radio drops to low power or resets. Anything that runs on a USB power bank also needs checking, because some banks shut off when the draw is too low and others when the draw is too high.

For solar, a modest panel is fine for topping off a radio battery or a small power bank, but be realistic about the numbers. A panel's rated wattage assumes ideal sun, and in practice you'll see much less with clouds, bad angles or winter days. So size it as a way to extend runtime, not as a guarantee of unlimited operation. It also helps to have a plain voltmeter in the kit, since many battery problems show up as a voltage sag before the radio gives any other warning.

Fuse close to the battery, label the polarity on both ends, and carry a few spare fuses. That is cheap and saves a lot of trouble later.

  • Moderators

On the family side, I'd keep the plan boring. Everyone should know three things: where to meet, what channel to try first, and what time to check in. If you set up a GMRS or FRS channel for the family, remember that those radios are line-of-sight tools that may do well across a neighborhood but not across town. Do a range test with actual buildings and terrain in the way, not just across a field, and write down where it fails.

It also helps to keep the plan usable by people who aren't radio hobbyists. A laminated card that says "Press and hold to talk, say who you are, say who you're calling, then release" does more than a feature-rich radio no one can operate. Cut the settings down to a minimum: set the channel, lock the keypad if the radio has that option, and put a label on the radio listing the channel, the family name and any codes.

For the ham side, find out what your local emergency communications group expects before you need it. Many ARES or similar groups have net procedures, check-in formats and training that make it easier to be useful on the day. A kit with the right frequencies and the right habits beats a bigger kit with neither. Also, don't forget weather radio. A NOAA Weather Radio with SAME programming for your county, a battery backup and a hand-crank or solar option is a good low-cost warning layer, and you can test it without ever transmitting.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.