ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Run vs. search-and-pounce: how do you decide when to leave a good run for a multiplier?
This is a rate-versus-multiplier question that comes up in almost every contest, and I'd like to compare how people actually decide it. It gets harder with a skimmer feeding the bandmap and a second radio available.
The basic trade-off: running at a steady 120 Q/hr is hard to beat on raw QSO points, but the score is QSO points times multipliers. In a contest with multipliers per band, such as CQ WW zones and countries or ARRL DX entities, a new mult on a new band can be worth more than several minutes of running. In a once-per-contest multiplier contest such as Sweepstakes sections, the value of chasing drops sharply after the first few hours, because most of the mults are already in the log.
A rough way to frame it is to compare the marginal value of a minute spent running with a minute spent hunting. If you are running at 2 Q/min and each QSO is worth, say, 3 points, a minute of running is worth about 6 points times your current mult count. A mult is worth roughly your total QSO points divided by your current mult count. So the later it is, and the more points you already have banked, the more each mult is worth in absolute terms, and the less each new mult is worth relative to what you'd gain by sticking with the run. The math changes with each contest, so it's worth working out the ratio once per event instead of relying on instinct.
Some practical questions I'd like to hear opinions on:
1. Band changes. If you're single-radio, when do you move? I've seen two schools of thought: move when your 10-minute rate drops below some fraction of your 60-minute rate, or move on a schedule tied to propagation (for example, going up when the high bands open to a target area). Rate-driven moves tend to leave you on a dying band slightly too long, because a hot 10 minutes can hide a trend. Does anyone track the rate trend explicitly in N1MM, or do you just watch the rate window?
2. Skimmer and packet spots. Skimmer spots are fast and mostly accurate on CW and RTTY. They are also biased toward strong signals near the skimmer, and busted calls get through when the skimmer decodes the wrong call. Telnet cluster spots from people have a different failure mode: they're often right but late, and a pileup you didn't know about may already be 15 deep. How much do you trust a spot before you check that the station is really there? Filtering the bandmap to show only needed multipliers is a big help, but only if the log's mult tracking is configured correctly for that contest.
3. SO2R. The usual model is to run on radio 1 and use radio 2 to hunt multipliers on a different band while your CQ message plays. The gain only holds if the receive audio is manageable and the antennas and filtering keep the two radios from desensing each other. Band-pass filters, stubs, and physical antenna separation matter more than any software setting. If the second radio is clobbering the first one's receiver, you're losing QSOs on the run radio to gain mults on the other. Are people finding that SO2R switching is a net benefit at all skill levels, or does it mostly help once the operator is already fast at single-radio running?
4. Category choice. Single-op all-band versus single-band, low versus high power, assisted versus unassisted, and whether two radios are allowed in a given category all change the optimal strategy. Assisted lets you use spots from the cluster, which pushes you toward more S&P and multiplier hunting. Unassisted means self-spotting off the skimmer is usually not allowed, so check the rules about what the skimmer counts as. Rules vary by contest and sponsor, so read the current rules each time.
5. Endurance. In 24- and 48-hour contests, a fatigue-driven mistake like a wrong exchange, a dupe, or a missed mult costs more than an hour's nap. When do you schedule rest, and do you plan it around expected low-rate periods or just crash when you hit the wall?
If you have a rule of thumb for deciding when to leave a run, I'd like to see the actual numbers and what contest it applies to, because the answer for CQ WW is not the answer for a state QSO party.
This is a rate-versus-multiplier question that comes up in almost every contest, and I'd like to compare how people actually decide it. It gets harder with a skimmer feeding the bandmap and a second radio available.
The basic trade-off: running at a steady 120 Q/hr is hard to beat on raw QSO points, but the score is QSO points times multipliers. In a contest with multipliers per band, such as CQ WW zones and countries or ARRL DX entities, a new mult on a new band can be worth more than several minutes of running. In a once-per-contest multiplier contest such as Sweepstakes sections, the value of chasing drops sharply after the first few hours, because most of the mults are already in the log.
A rough way to frame it is to compare the marginal value of a minute spent running with a minute spent hunting. If you are running at 2 Q/min and each QSO is worth, say, 3 points, a minute of running is worth about 6 points times your current mult count. A mult is worth roughly your total QSO points divided by your current mult count. So the later it is, and the more points you already have banked, the more each mult is worth in absolute terms, and the less each new mult is worth relative to what you'd gain by sticking with the run. The math changes with each contest, so it's worth working out the ratio once per event instead of relying on instinct.
Some practical questions I'd like to hear opinions on:
1. Band changes. If you're single-radio, when do you move? I've seen two schools of thought: move when your 10-minute rate drops below some fraction of your 60-minute rate, or move on a schedule tied to propagation (for example, going up when the high bands open to a target area). Rate-driven moves tend to leave you on a dying band slightly too long, because a hot 10 minutes can hide a trend. Does anyone track the rate trend explicitly in N1MM, or do you just watch the rate window?
2. Skimmer and packet spots. Skimmer spots are fast and mostly accurate on CW and RTTY. They are also biased toward strong signals near the skimmer, and busted calls get through when the skimmer decodes the wrong call. Telnet cluster spots from people have a different failure mode: they're often right but late, and a pileup you didn't know about may already be 15 deep. How much do you trust a spot before you check that the station is really there? Filtering the bandmap to show only needed multipliers is a big help, but only if the log's mult tracking is configured correctly for that contest.
3. SO2R. The usual model is to run on radio 1 and use radio 2 to hunt multipliers on a different band while your CQ message plays. The gain only holds if the receive audio is manageable and the antennas and filtering keep the two radios from desensing each other. Band-pass filters, stubs, and physical antenna separation matter more than any software setting. If the second radio is clobbering the first one's receiver, you're losing QSOs on the run radio to gain mults on the other. Are people finding that SO2R switching is a net benefit at all skill levels, or does it mostly help once the operator is already fast at single-radio running?
4. Category choice. Single-op all-band versus single-band, low versus high power, assisted versus unassisted, and whether two radios are allowed in a given category all change the optimal strategy. Assisted lets you use spots from the cluster, which pushes you toward more S&P and multiplier hunting. Unassisted means self-spotting off the skimmer is usually not allowed, so check the rules about what the skimmer counts as. Rules vary by contest and sponsor, so read the current rules each time.
5. Endurance. In 24- and 48-hour contests, a fatigue-driven mistake like a wrong exchange, a dupe, or a missed mult costs more than an hour's nap. When do you schedule rest, and do you plan it around expected low-rate periods or just crash when you hit the wall?
If you have a rule of thumb for deciding when to leave a run, I'd like to see the actual numbers and what contest it applies to, because the answer for CQ WW is not the answer for a state QSO party.
Link to comment
https://www.hamradiobase.com/forums/topic/11797-run-vs-search-and-pounce-how-do-you-decide-when-to-leave-a-good-run-for-a-multiplier/Share on other sites