Planning a first POTA activation: park references, getting to 10 QSOs, spotting, and logging two-fers
- Replies 2
- Views 14
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Chad 1 post
-
Mod_Chrissy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'm putting together a checklist for people who have hunted Parks on the Air contacts and want to try activating. Here is how I understand the basics. Please correct anything that's off, and add what you'd put on your own checklist.
Park references. Every park has a reference made of a program prefix, a dash, and a number, such as K-0001. The prefix identifies the entity or country, and the number identifies the park. Look up the exact reference on the POTA site or in the app before you leave. Similar park names, and parks that sit next to each other, are easy to mix up.
10 QSOs. An activation counts when you log at least 10 contacts from inside the park boundary within a single UTC day. The UTC part catches people out when they operate across local midnight. Any mode that counts as a valid QSO works, so SSB, CW and digital are all fair game, but check the current rules for anything unusual. Hunters don't submit logs for credit. They get credit when the activator uploads a log that includes their callsign.
Spotting. Posting a spot through the POTA website or app is what brings hunters to you. Include the park reference, your frequency, the mode, and a short comment. Before you spot, listen on the frequency and ask whether it's in use, because a clean frequency makes the whole operation go more smoothly. Automated spots from the Reverse Beacon Network can help on CW and some digital modes, but they don't replace a good human spot.
Power and antennas. There's no required power level, but many activators run QRP or around 5 to 20 watts with a portable antenna: a wire hung in a tree, an end-fed half-wave, or a vertical on a mast. Your park's rules come first. Some parks don't allow you to hang wire from trees or to place an antenna or a mast where it could be a hazard. Others restrict where you can park or set up.
Two-fers and roving. Some locations fall under more than one reference, for example a state park that overlaps a trail or a wildlife area. That's a two-fer, or a three-fer and so on. As I understand it, the same contacts can count toward each reference, but you need to log and upload them for each one. Roving means activating several parks in one outing or across several days, and each park is its own activation with its own 10 QSOs.
Logging. Most people log in their normal logger and export an ADIF file. The app can then validate the park references and the contact data. Check the current upload instructions before your first submission, because the required ADIF fields and formatting for multi-park logs have changed over time.
Questions for everyone: What do you wish you'd known before your first activation, and what do you do when contacts come slowly?
Link to comment
https://www.hamradiobase.com/forums/topic/11831-planning-a-first-pota-activation-park-references-getting-to-10-qsos-spotting-and-logging-two-fers/Share on other sites