Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

New ham here or just getting started? Share your first QSO, your first radio, and what you'd tell your newly licensed self

ci_cover.jpg

Welcome to the beginner thread. Whether you passed your exam last week or got licensed a while ago and still haven't keyed up, this is a place to introduce yourself and swap getting-started notes.

Some prompts if you're not sure where to start:

Introductions: What license class do you hold (or are you studying for), what country are you in, and what pulled you toward ham radio? Emergency comms, HF DXing, satellites, building antennas, and plain curiosity are all good reasons.

First radio: What was it, and what would you buy first if you were starting over? Handhelds are the usual entry point, but plenty of people go straight to a used HF rig or a QRP kit.

First contacts: Was it a local repeater, a simplex check-in, a net, or a POTA or SOTA activator on HF? What made it easy, or nerve-wracking?

Elmers and clubs: Did a mentor or a club meeting change how you got started? What's a good question to ask at a first meeting?

Mistakes to avoid: Wrong offset, wrong CTCSS tone, a feedline you regretted, a purchase that sat in a box. Tell us so the next person doesn't repeat it.

Please include your license class and country when you give advice. Privileges and band plans differ, and what's legal for one person may not be for another.

  • Replies 2
  • Views 24
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Here's a rundown of what tends to work for a first repeater contact, since it's the step people most often overthink.

Before transmitting, program the repeater correctly. You need the output frequency, the offset direction and size, and the CTCSS (PL) tone if the repeater requires one. A repeater directory or a club's published list helps, and software like CHIRP is easier than punching channels in by hand. If you hear the repeater but it won't open up for you, the tone or offset is the usual suspect.

Then listen for a few minutes. You'll get a feel for how people check in, whether there's a net running, and how long the courtesy tone and timeout are. When you're ready, keep it simple: say your callsign and that you're listening, something like "this is (your call), monitoring." You don't need to say "any radio check" or put on a show. If someone answers, a short exchange with your name and general location is plenty.

Also check the basics: low power is usually enough for a local repeater, and the stock rubber-duck antenna is often fine near town. If reports say you're scratchy, try holding the radio vertically, stepping outside, or moving away from big metal objects before you spend money on anything.

  • Moderators

On "what to buy first," a few suggestions that fit a lot of situations, but adjust them to your goals and budget.

If you want local contacts and clubs, a decent dual-band handheld is a sensible start. Spend a little on a better antenna for it, like a roll-up J-pole or a magnetic-mount whip on a car roof, before spending on a second radio. The antenna usually makes a bigger difference than the radio.

If HF is the goal, listen first. A used HF transceiver, a power supply that can handle its current draw, and a simple wire antenna like an end-fed or dipole will get you going. Don't ignore the feedline and the ground or common-mode choke. Cheap coax and a poor match can eat a lot of your signal, and noise from nearby electronics can drown out what you're trying to hear. An inexpensive antenna analyzer or a good SWR meter is worth having so you know what the antenna is doing.

Common mistakes: transmitting into an unplugged or unmatched antenna, buying a pile of gear before knowing what you enjoy, and skipping the manual. Also get to a club meeting. Someone there can usually help you check your setup, lend a meter, or point you at a net or a Field Day station where you can watch a contest operator work before you try it yourself.

For a first HF contest, search-and-pounce is gentler than calling CQ. Listen to a few exchanges, copy the format, and answer one when you're comfortable. Most operators are patient with newcomers, especially if you say it clearly: "say again" is a perfectly good thing to say on the air.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.