Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Admin_Lee

Administrators
  • Joined

  • Last visited

Everything posted by Admin_Lee

  1. I'd put filtering ahead of most internal mods, especially for expanded receive. If a handheld or mobile is opened up to a wide range and suddenly you hear birdies or the same strong station in several places, the radio is probably being overloaded rather than "improved". A bandpass or notch filter for the band you actually care about, plus a decent antenna, can clean up more than a firmware or diode change. Check one thing at a time: put the filter in, note whether the false signals disappear, then take it out and confirm they return. That shows whether the problem is overload, an image or a real signal. The same principle applies to noise. Before buying anything, try the radio on a battery and a small antenna away from the house. If the noise vanishes, the radio is fine and the cause is local, and ferrites or relocating the antenna are better places to start than touching the board.
  2. For the VARA HF versus ARDOP question, the practical answer is that you need to match the gateway. A gateway supports only the modes it advertises, so look at the channel list first and choose the best mode for the path rather than your preferred one. VARA can be significantly faster when the path is good, but its free version is speed-limited and a registration removes that limit. ARDOP is free and works on the same kind of sound card setup, and it has bandwidth settings you can choose to match the band conditions. On a weak or noisy path, a narrower bandwidth often gives a better chance of a completed session than a wider one, even though the nominal speed is lower. On the frequency mismatch, I would confirm what the list means before touching the radio. If the list is a center frequency and your software expects a dial frequency, you can end up 1500 Hz off, which is enough to cause a failed connect. Test the same gateway on the same mode from the channel selector, so the software handles the offset, and compare that to what you set by hand. If the results differ, you have found the offset problem. Also keep a note of which gateways answered, the time of day, and the mode, because that record is more reliable than any listing next time.
  3. Start by separating law from convention. The FCC rules in Part 97 (the privileges in §97.301 through §97.305 and the power limits) are legal requirements. The ARRL band plan is a voluntary agreement about how to share space. It isn't enforceable, but ignoring it is how you end up parked on top of a weak-signal net or a beacon. Check the legal edge first, then the band plan inside it. For HF in the US, the rough shape by license class is this. General and Extra share most of the plan, and Extra adds the bottom slices of several bands. Technicians get CW-only segments on 80, 40 and 15 m (about 3.525 to 3.600, 7.025 to 7.125, and 21.025 to 21.200 MHz). They also get 28.000 to 28.500 MHz on 10 m, with data and CW below 28.300 and SSB above it, all at a 200 W PEP limit on HF. General gets the following phone segments: - 80 m: about 3.800 to 4.000 MHz - 40 m: about 7.175 to 7.300 MHz - 20 m: about 14.225 to 14.350 MHz - 15 m: about 21.275 to 21.450 MHz Extra gets wider phone sections just below those, for example 3.600 to 3.800 on 80 m and 14.150 to 14.225 on 20 m. General also gets 160 m, 17 m, 12 m and 10 m in full, plus the 30 m band (10.100 to 10.150 MHz, CW and data only, 200 W PEP limit). Verify the exact numbers against the current §97.301 and §97.305 tables before you rely on my rounding. Novice and Advanced licenses are no longer issued, but existing holders keep their privileges. The band plan then subdivides the legal segments. CW and narrow digital modes sit at the bottom of each band's CW/data section, and phone sits in the phone segment. There are also customs, like the DX windows on 80 m and 40 m and a general rule that you don't call CQ on a frequency without listening first. Digital activity clusters around conventional dial frequencies. FT8 is commonly found at about 1.840, 3.573, 7.074, 10.136, 14.074, 18.100, 21.074, 24.915, 28.074 and 50.313 MHz, all USB dial frequencies. Those sit inside the CW/data segments on HF, but your signal extends a few kHz above the dial frequency, so make sure that's still legal for your class. On band edges, think about where the signal sits relative to the dial. In USB the occupied bandwidth extends upward from the dial frequency, so near an upper edge like 14.350 you need the dial well under it, with the whole signal about 3 kHz wide inside the limit. In LSB the signal extends downward, so near a lower phone edge like 3.800 for a General you need to dial above it (3.803 or more, to be safe) so the lower sideband doesn't fall outside the segment. Dial calibration errors and transmit filter skirts add to the risk, so leave margin and don't try to hit the exact edge.
  4. Good list. I'd add that reverse (or "reverse offset") is one of the most useful features for new operators. It swaps your transmit and receive frequencies so you can listen on the repeater's input. If you can hear the other station well on the input, you can probably talk simplex and free up the repeater. If you can't hear them there, a repeater is the right choice. One more tone issue: some repeaters need the access tone only on your transmit side and send no tone on their output. If you turn on tone squelch for that repeater, your radio will stay muted. In that case you set the "Tone" (encode) value, not the decode value, so check what your radio's tone mode actually does. For DMR, color code and timeslot mismatches look just like a dead repeater, because you can key up and nothing comes back. If you can't get in, check those and the talkgroup before you decide the repeater is down.
  5. For gain, the most reliable method is the same on any SDR: start low and raise gain until the noise floor in your passband rises by a few dB, then stop. Past that point you are mostly amplifying noise and stronger signals, and eating headroom. On an RTL-SDR with an R820T2-type tuner, maximum gain is rarely the best setting in a city. Something in the middle often gives a better picture, especially if you have a strong signal outside your band of interest. A quick overload check is to insert an attenuator or drop the gain by 6 to 10 dB and watch the suspect signals. A real signal drops roughly in step with the attenuation, and the noise floor changes little once you are above the receiver's own noise. Intermodulation products and images usually fall much faster than the real signal, because third-order products change about 3 dB for every 1 dB of input change. If a ghost signal disappears or shifts when you add a bandstop filter on the broadcast FM band, you have found your cause. On SDRplay, the gain control is split into RF gain reduction and IF gain reduction, and the broadcast notch options are handy for MW, FM and DAB. In SDRuno you can watch both the spectrum and the overload indicator while adjusting. Airspy hardware and SDR# work similarly, with different gain modes (linearity, sensitivity) that are really preset compromises between noise figure and intercept point. HackRF has separate RX amp, LNA and VGA stages. The usual advice is to leave the RX amp off unless you need it, because that extra 14 dB is easy to overload with. One caveat on the 8-bit devices: they are excellent value for exploration, decoding and monitoring, but their dynamic range is limited, so a good filter often does more than a better antenna. A wideband antenna plus a sensitive LNA at the receiver is exactly what makes overload worse.
  6. I'd spend on the feedline and mounting before the antenna, if the run is more than a few meters. A 6 dB antenna on lossy coax at 70 cm can easily end up behind a plain quarter-wave on a short run. Do the loss arithmetic with real figures from the cable datasheet for your band, then add roughly 0.1 to 0.3 dB per connector pair as a rule of thumb. For a fixed station, I'd lean toward a collinear or a 5/8-wave vertical for local FM, if the terrain is fairly flat or you are working a repeater at a similar elevation. If the nearby repeater is on a hill above you, extra gain flattening the pattern can disappoint, and a simpler lower-gain antenna may work as well. A yagi is the better tool if there's one specific repeater that's marginal. It cuts noise and adds gain, but it needs a rotator or a fixed heading. On connectors, a short N-to-PL-259 pigtail is a sensible way to use a mixed set of radios without putting a UHF connector out in the weather. Whatever the connector, tape or seal it properly and make a drip loop. Water in the coax is a classic cause of an SWR that creeps up over months.
  7. On testing without power: a small 12 V battery pack with an inline fuse and a few common connectors covers most cases. Keep a dummy load and a short coax jumper with you too. If a seller is fine with it, even a receive-only check on a known local repeater or a weather channel will tell you quite a bit about a handheld or mobile rig. If you can't test at all, price it as a gamble and be ready to walk away. One more tip: look at the connectors, because they show how the gear was treated. Loose or cross-threaded antenna jacks, a bent mic pin or a cracked battery latch usually say more than the seller's story does.
  8. On the FT-65R vs. a cheap Baofeng question, the radio itself matters less than what you do with it afterward. Either one is fine for learning, but I'd spend the money you saved on a decent antenna and a second battery. Programming is also a good test. If you can load a clean channel list in CHIRP, back up the original image first, and verify offsets and tones against a current repeater directory, you'll be ahead of many new operators. One thing people forget: a repeater list from the internet can be out of date. Confirm the offset and the tone with the repeater's owner or club before assuming the entry is right. Then test it by listening on the input frequency to see whether you can hear other users, which tells you if simplex is workable in your area.
  9. I'd add that Field Day, Winter Field Day, and the QSO parties are worth treating as separate skills from the big DX contests. In a QSO party, the exchange depends on where you are, so read the rules for both in-state and out-of-state stations. Some parties want county abbreviations that aren't obvious, so having the county list loaded in your logger helps a lot. In Field Day, a lot of the score and the fun come from setup, power source, and bonus points, not only from raw QSO count, so read the rules on what counts for those. For SOTA, the log you submit is not a contest Cabrillo. Activators and chasers record contacts and submit them to the SOTA database following its own rules and reference formats. If you plan a summit activation on a contest weekend, be clear about whether you're operating for the contest, for SOTA points, or both. Check the current rules to see what's allowed, especially around spotting, frequency use, and any rules about how you operate. Last practical note: with so many events, a calendar reminder for the log deadline is as useful as one for the start time. A log that is finished but never uploaded won't count for anything, and checking the sponsor's confirmation or log-receipt page afterward is a good habit.
  10. One thing I'd put near the top of the list is looking at the service manual's block diagram and the protection circuit description before touching anything. SWR protection on many rigs isn't one single sensor. It's often a forward/reflected detector, a comparator or microcontroller input, and a drive-reduction path (ALC or a bias cut), and a fault in any of those can look like a bad antenna. A useful test is to use a good dummy load and a separate wattmeter. If the rig's own meter shows high SWR but the external meter shows the load is fine, the sense circuit is lying. Then you can probe the detector diode outputs with a DMM while transmitting at low power and see whether forward and reflected voltages look reasonable and respond sensibly. A shorted or open diode, a dried-out capacitor on the sample line, or a corroded trimmer can all produce a false trip. On blown finals, the standard warning is worth repeating: don't power up a repaired PA at full voltage straight away. Use a current-limited bench supply, start with low voltage if the manual allows, confirm idle current with no drive, then apply a little drive into the dummy load and watch for rising current that doesn't track the output. Thermal runaway and oscillation both show up early if you watch the current meter. Also check the output filter and the relay path after a PA failure, because heat or a surge can damage those too.
  11. On studying, you don't have to choose between the tools. They do different jobs. The ARRL Ham Radio License Manual explains why things work: what a repeater offset is, why a longer antenna suits a lower frequency, what a dB is. That context makes the questions easier to retain. HamStudy is better for drilling. It has spaced repetition, tracks which questions you miss, and runs practice exams that mimic the real format. A reasonable approach is to read a chapter, then drill that section's questions right away. One thing to check is the question pool. The Technician pool is replaced on a fixed multi-year cycle, and the pool in use on your exam date is the one that counts. Make sure your book edition or app setting matches it. An outdated pool wastes study time. On readiness, the Technician exam has 35 questions and you need 26 correct. Don't aim for 26. Take full practice exams until you're scoring well above passing, say 85–90%, on different days and not just right after studying. If you only pass when you recognize the answer's position or wording, you've memorized the layout instead of the material. Read all four answer choices anyway. Some wrong answers are plausible variations of the right one. For your first steps after passing: Wait until your call sign shows up in ULS before you transmit. Then program a few local repeaters into a handheld (RepeaterBook is a common directory), and listen before you talk, since you'll learn the local etiquette fast. Check in on a club net, where new hams are welcome and the pace is slow. Ask the club about Elmers (experienced mentors) too. Before buying gear, find out what the local hams actually use, because repeater coverage differs a lot between areas. Technician privileges include all amateur VHF/UHF bands plus some limited HF segments, so there's plenty to try, including simplex, nets, and satellite passes.
  12. For me the dividing line is whether the radio makes me want to turn it on. Specs get a rig onto the shortlist, but the keepers are the ones where the tuning feel, the AGC behavior and the audio all work together. A receiver with a slow, smooth AGC and a good filter can be really pleasant on SSB or AM even if a newer rig beats it on a bench test. The caveat is that nostalgia can hide real problems. A boat anchor with hum, drift or a noisy front end is charming for about an evening if you're trying to use it as a daily driver. I'd say buy vintage for the experience, but be honest about what you'll actually do with it.
  13. Ham radio and CB radio both put your voice on the air, but they are different radio services with different purposes, rules and capabilities. The short answer: CB is simple, license-free, short-range communication on one narrow band. Amateur radio is a licensed service with many bands, many modes, higher power limits and the freedom to build and modify equipment. This article compares the two on licensing, power, frequencies, equipment, range, cost and typical uses, then gives a framework for choosing. This article is general information, not legal advice. Rules change, so check the current text of FCC Part 95 (CB) and Part 97 (amateur radio) before you buy or transmit. Quick Comparison at a Glance FeatureCB RadioAmateur (Ham) Radio FCC rulesPart 95, Subpart D (Citizens Band Radio Service)Part 97 (Amateur Radio Service) Exam and licenseNo exam and no individual license in the USExam required; the FCC issues a license and call sign FrequenciesOne band near 27 MHz with 40 channelsMany allocations from HF through VHF, UHF and microwave PowerTightly capped (verify current Part 95 limits)Much higher on many bands, up to the Part 97 limit EquipmentCertified, non-modifiable radios; no external RF amplifiersCommercial, used or homebuilt gear; modification and amplifiers allowed within Part 97 ModesAM and SSB voiceFM, SSB, AM, CW, digital modes, repeaters, satellites and more IdentificationNo call sign requiredCall sign identification required Typical usesTrucking, convoys, job sites, local chatHobby, experimentation, long-distance contacts, emergency communication What Is CB Radio? Citizens Band basics The Citizens Band Radio Service occupies a small slice of the spectrum around 27 MHz, divided into 40 channels. In the United States you do not take an exam or hold an individual license to operate a CB, as long as you follow the rules. US CB operation is limited to AM and single sideband (SSB) voice. Most casual users run AM, while SSB can be more efficient and is popular with enthusiasts. Common uses CB remains popular where people need quick, no-paperwork communication within a small area: Trucking: drivers use CB for road conditions, traffic and local chatter. Channel 19 is traditionally popular with truckers. Convoys and off-road groups: a vehicle-to-vehicle radio that needs no setup for passengers. Farms, ranches and job sites: short-range coordination without licensing. Local chatter and monitoring: listening to what is happening nearby. Channel 9 is conventionally used for emergency communications. That is a long-standing convention, not a guarantee that anyone is monitoring it where you are. CB rules to know Certified equipment: CB transceivers must meet FCC certification requirements. Radios sold for the service are built to those limits. Power limits: commonly cited limits are about 4 watts carrier power on AM and 12 watts peak envelope power on SSB. Confirm in current Part 95 text. No external RF amplifiers: Part 95 prohibits them on CB, and modifying a radio to exceed its certified operation is also prohibited. Content and interference: obscene language, interfering with others and other misuse are prohibited, and the rules also address business and long-distance use. Read Part 95 Subpart D for specifics. Antenna height: Part 95 has limits on how high a CB antenna may be mounted. Check the current figures and any local zoning or HOA rules. What Is Amateur (Ham) Radio? Purpose of the Amateur Radio Service Part 97 describes the Amateur Radio Service as a non-commercial service for self-training, technical experimentation, emergency communication and building a pool of skilled radio operators. That goal shapes the rules: amateurs get broad privileges in exchange for demonstrating knowledge and following a regulatory framework. Licensing in the US There are three license classes: Technician: the entry level. It offers full privileges on VHF and UHF and limited HF privileges. General: adds substantial HF privileges across many bands. Amateur Extra: the highest class, with all amateur privileges. Exams are given by Volunteer Examiners (VEs) working under Volunteer Examiner Coordinators (VECs). After you pass, the FCC issues a call sign. Exam formats, fees and session options change over time, so check the ARRL and the FCC for current details. Operating privileges and responsibilities Hams must identify with their call sign at the intervals Part 97 requires. Amateur radio is not for business communications, music broadcasting, obscene or indecent language, or messages encoded to hide their meaning. In return, hams may build and modify their own equipment and use amplifiers within the limits of Part 97. Key Differences Between Ham Radio and CB Radio Licensing and entry barrier CB needs no individual license, so you can buy a radio, install an antenna and start listening. Ham radio requires an exam. The exam is also an introduction to the basics: safe operation, rules, antennas, propagation and good practice. Many people find that knowledge is exactly what makes the hobby rewarding. Frequencies and bands CB gives you one band. Amateurs have allocations across HF, VHF, UHF and higher, and the band you choose determines what the signal does. Lower HF bands can support long-distance communication, while VHF and UHF are mostly local, line-of-sight and ideal for repeaters. That variety is why ham radio can serve so many different purposes. Your license class determines which parts of each band you may use. Power limits CB power is tightly capped. Amateur limits are far higher on many bands. Part 97 allows up to 1,500 watts PEP in general, with exceptions and lower limits in some situations. Operators are also required to use only the power needed for the communication. More power is not automatically better. A well-built antenna, a low-loss feedline and the right band at the right time usually matter more than extra watts. Equipment rules CB radios are certified, closed systems. You cannot legally add an external RF amplifier or modify the radio to exceed its approved operation. Hams may homebrew transmitters, modify radios and use amplifiers within Part 97. That is why amplifier reviews, antenna experiments and kit builds are part of ham radio culture but not CB. Modes and technology CB is mostly AM and SSB voice. Ham radio includes FM voice, SSB, CW (Morse code), digital modes such as FT8 and packet, repeaters, satellite communication, mesh networking and more. If you want to explore technology, ham radio gives you far more to explore. Identification and etiquette Hams identify with their call sign, which creates accountability and makes contacts easier to log and confirm. CB culture is more informal, with handles and local slang. Both services prohibit interference and obscene language, but the culture and enforcement differ from community to community. Range and Performance: What to Realistically Expect Why range claims vary Any claim like "this radio reaches X miles" depends on conditions. Range is determined by: Antenna type, gain and height Feedline loss and connectors Terrain and obstructions Noise level at both ends Band and mode Power, which is only one factor CB propagation At 27 MHz, CB is usually local. Ground-wave and line-of-sight coverage dominate, and vehicle-to-vehicle range depends heavily on terrain. Sometimes the ionosphere reflects 27 MHz signals, especially around solar cycle peaks, and signals "skip" over long distances. Skip is unpredictable and can cause interference. Part 95 also has provisions about long-distance communication, so read the current rule before deliberately working distant stations. Ham propagation Ham operators work a range of propagation modes: HF: ionospheric skip that can span continents depending on the band, time of day and solar conditions. VHF/UHF: mostly line-of-sight, extended by repeaters on towers and tall buildings. Special propagation: tropospheric ducting, meteor scatter, sporadic E and satellites. These let hams reach beyond what a handheld or CB could do alone, but each requires the right band, antenna and timing. Antenna considerations A tuned antenna with good SWR beats extra power on a poor antenna. CB users commonly run mobile whips, base verticals and sometimes beams. Hams use dipoles, verticals, Yagis, loops and mobile antennas matched to the band. Whichever service you choose, check height limits, mounting safety, local zoning and HOA rules before putting up anything outdoors. Equipment and Cost Considerations CB setup A basic CB station consists of a radio, antenna, coax, an SWR meter and a mounting solution. Entry cost is low, and the choice of radio and antenna is smaller than in ham radio. Prices vary by market, and used gear is common. Ham setup A ham station can be as simple as a VHF/UHF handheld or as elaborate as an HF base station with a power supply, antenna system, tuner and accessories. The price range is wide, and new and used markets differ. Many beginners start with an inexpensive handheld and a local repeater, then add HF later. You also have exam study materials and a small exam fee to consider. Budget tips and common mistakes Spend on the antenna system first: a better antenna and coax often improve performance more than a more powerful radio. Avoid cheap coax and poor connections: they waste signal and cause SWR problems. Do not skip grounding and safety: install antennas away from power lines and follow lightning and electrical safety practices. Do not ignore RF exposure: especially with higher power and antennas close to people. Match the antenna to the band: a mismatched antenna can damage the transmitter. Which Should You Choose? Choose CB if... You want simple, license-free communication with truckers, convoys or work groups. You need a quick setup in a vehicle with minimal learning curve. Your communication is local and informal. Choose ham radio if... You want flexible communication across many bands and modes. You are interested in emergency communication, with the training and equipment that requires. You want long-distance contacts, digital modes or satellites. You enjoy experimenting with antennas, building equipment or learning radio theory. Consider both Many people use a CB in a vehicle and ham gear for other purposes. They are separate services, and the radios are not interchangeable. What about FRS and GMRS? Family Radio Service (FRS) and General Mobile Radio Service (GMRS) are other short-range options. FRS has been license-free, while GMRS requires an FCC license but no exam. Rules and equipment limits vary, so check the FCC for current details before buying. Common Myths and Mistakes Myths to avoid "A ham license lets me use any frequency." No. Amateurs may transmit only on amateur allocations, within their license class privileges. "A CB amplifier is fine if I use it just a little." External RF amplifiers are not permitted on CB under Part 95. "More power always means more range." Antenna, terrain, band and conditions often matter more. "CB and ham radios are interchangeable." They are built for different services, frequencies and rules. "Ham radio is only for experts." The Technician license is designed as an entry point. Legal cautions Use ham equipment only on amateur frequencies, except where the FCC explicitly permits otherwise. Do not use ham-only gear on CB channels, and avoid illegal amplifiers or modifications. If you are unsure, read the rule text or ask the FCC or ARRL. How to Get Started with Ham Radio (If You're Coming from CB) Steps Find current Technician study material from the ARRL or another reputable source. Take practice exams until you consistently pass. Find a local club or a VE exam session. Pass the Technician exam. Receive your call sign from the FCC. Start with a handheld and a local repeater, then explore other bands. What CB experience transfers If you have used a CB, you already know the basics of antennas, SWR, microphone technique and on-air etiquette. What is new is the call sign system, band plans, repeaters, license privileges and the variety of modes. Frequently Asked Questions Do I need a license for CB radio? Under current FCC rules, CB operators in the US do not need an individual license, but they must follow Part 95 Subpart D. Verify on the FCC website before operating. Can a ham use a CB radio, and vice versa? A ham license does not change the CB rules: a ham operating a CB must use certified CB equipment and follow Part 95. A CB user without a ham license may not transmit on amateur bands. Ham radios are generally not certified for CB use, and CB radios are not designed for ham bands. Which has better range? It depends. Ham radio offers more options for extending range, such as higher power, better bands, repeaters and satellites, but a handheld in rough terrain may not outperform a good CB antenna on a truck. Setup, conditions and goals matter. Is ham radio good for emergencies? It can be, depending on your training, equipment and local networks. Hams often support emergency communication, but readiness takes practice, backup power and participation in local groups. Can I modify my CB radio? Modifications that change a certified radio's operation can violate Part 95. Do not modify a CB radio to exceed its legal limits. Check the FCC rules or consult a qualified technician. Conclusion The core trade-off is simplicity versus capability. CB gives you license-free local communication with little learning. Ham radio asks for an exam and some study, then opens up more bands, modes, equipment freedom and technical depth. If you drive trucks, run convoys or need basic local comms: CB is likely enough. If you want a hobby, emergency capability or long-distance contacts: start studying for the Technician exam. If you are undecided: a CB for the vehicle and a ham handheld are a reasonable combination. Before buying gear or transmitting, verify current FCC Part 95 and Part 97 text and check the ARRL for exam information. Good next reads are antenna basics, HF propagation and a Technician exam study guide.
  14. One thing to add is that the mode changes the etiquette. On FT8 in DXpedition mode, the expedition station is usually the Fox and the callers are Hounds. The normal practice is for the Fox to transmit in a lower audio range, and for Hounds to call above that range, typically above about 1000 Hz. The idea is to keep the Fox's frequency clear, and the software handles part of the logistics. If a Hound calls in the Fox's own range, he can disrupt the process for everyone. Read the expedition's published instructions and your software's documentation before you transmit. For choosing targets, Club Log is a useful planning aid. Its most-wanted data shows which entities are in greatest demand, and the expedition's own logs let you check whether you appear in the log after the contact, subject to upload timing. It also helps you decide which bands and modes to prioritize. If you need an entity on only one band or mode, you can focus your effort on that path instead of trying every opportunity. For planning, check whether the expedition has published its operating plan, QSL policy and OQRS arrangement, so you do not waste time on unnecessary repeat contacts. As for the rare-entity part, planning an expedition to a place such as Clipperton or Bouvet involves a lot more than radio. Landing permission, transport, weather, safety, power, antennas, and the cost of keeping a team on site all influence how much operating time is available. Operators on the receiving end can help simply by being efficient. Make the contact once on each band or mode you need, and avoid duplicate calls to the same station. Every wasted call takes time away from other people who may still need the entity.
  15. I'd add one pre-step: inspect and clean before you apply power. A lot of kit failures are solder bridges, cold joints, a transistor in backwards, or a part with the wrong value. Reading resistor color codes again with a meter takes ten minutes and can save a damaged transistor. Electrolytic capacitor polarity and diode orientation are the two I'd check twice. For direct conversion receivers specifically, I'd treat the audio chain as its own bring-up stage. Touch the audio input and listen for hum, then connect the mixer and see if you get a rushing noise that rises with signal. If you hear broadcast AM breaking through, that is a common weakness of direct conversion designs without front-end filtering, so a bandpass filter ahead of the mixer is worth adding. On the kit-versus-scratch question: with a BITX or uBITX-type board, it's tempting to modify things early. Getting it working as designed first gives you a baseline to compare against when you do start changing parts. Otherwise you can't tell whether a new problem came from your modification or was already there.
  16. Start with safety bonding, because everything else builds on it. The AC equipment grounds keep the chassis safe on a fault, and the station ground is there for lightning and static. If you add a separate ground rod for the antenna entry, it must be bonded to the service entrance grounding system. Two unconnected ground systems can put a dangerous potential between them during a strike. Check your local electrical code, or have an electrician verify it, rather than relying on forum rules of thumb. For RF inside the room, short and wide beats long and thin. A copper strap or a short bus bar that every chassis ties to is fine, but its job is mainly to keep the equipment at the same potential. It will not fix common-mode current coming down the coax. That is better handled with chokes: a ferrite choke (a type 31 mix is commonly used for HF) at the feedpoint and another where the coax enters the shack. Chokes there often fix more problems than extra ground wire. The loop worry is real but usually shows up as audio hum or USB noise, not RF. Keep AC cords and DC leads away from coax and audio cables, and cross them at right angles where you have to. If a USB audio connection hums, try an isolator or a powered hub on the same strip before blaming the ground system. On power, headroom matters more than the label. A supply rated for about 30 A for a 20 to 23 A rig stays cooler and quieter and rides out voltage sag on transmit. Whichever way you go, use heavy-gauge DC leads, keep them short, and fuse each positive lead near the source. Powerpole distribution makes adding the second rig or the amp's control supply much easier later.
  17. For net control, I'd say the biggest factor is a predictable rhythm. Open with the net's purpose, the frequency, and whether it's a directed net. Then call for check-ins in a consistent order, such as by category or by call-sign area, and read the list back at the end so people can fix errors. Slow, clear phonetics help more than speed, especially on 40 m, where band conditions and adjacent signals can eat half a call sign. For check-ins, giving your call and then listening is better than adding extra information nobody asked for. If the control stations ask for "short-time" check-ins first, keep your transmission to the minimum. If you have formal traffic, wait to be recognized and then give the precedence, the number of messages, and the destination. One note on SKYWARN-style nets: follow the activation procedures and reporting criteria for your area, and don't treat a net as a general chat channel while severe weather is moving through. A short, accurate report with location and time is much more useful than a long description.
  18. I'd push harder on the MARS/CAP section, because "the radio can do it" gets repeated as if it were permission. It isn't. Those services have their own authorization, assigned frequencies, and procedures, and an unlock procedure doesn't give a licensee any standing on them. If you're a member, your program or communications officer will usually tell you what's allowed on your equipment, and following that is simpler and safer than guessing from a forum post. For power, one thing to add is the charging side. Switching from a lead-acid supply to lithium chemistry changes the charge profile, so the charger, protection board, and low-voltage cutoff all need to suit the pack. Fusing near the battery and using heavy enough wire matters more than which chemistry you pick, since a short on an unfused lead is the dangerous failure. Also on noise: when you try ferrites, the mix matters. A bead that does nothing at HF may help at VHF, and vice versa, so match it to the band where you actually hear the problem and test one change at a time.
  19. On the efficiency side, it helps to separate two things: transmit efficiency and total system current. A rig that makes 5 W with a high-efficiency final and draws a few hundred milliamps on receive will last far longer on a small battery than one that draws more at idle, even if both are rated 5 W. If you're planning a long day, look at the receive current as well as the transmit figure, and think about how much of your time is spent listening versus calling. The Mountain Topper is designed with low drain in mind, whereas the KX2 and KX3 are more feature-rich and use more power, though still modest compared with a 100 W rig. For contests and awards, QRP-ARCI runs events and has operating awards aimed at low-power operators, and you can find details of their rules and schedules on their site. A good tactic is to call CQ near the QRP frequencies, answer other stations rather than calling for long periods, and use CW if you can, since its narrow bandwidth gives a real advantage at low power. If you do work SSB at 5 W, a compressed, clean signal and a decent antenna matter more than raw power, and 20 m and 15 m are often the places to try when conditions are good.
  20. The short version is that "ITU", "ICAO" and "NATO" phonetics all refer to essentially the same spelling alphabet. It was designed so the words are distinguishable across many native languages and bad audio. That is why the spellings are odd: "Alfa" and "Juliett" are written that way so speakers of other languages pronounce them correctly. Amateur practice usually just calls it "the standard phonetic alphabet". On requirements: I would check your own regulator's rules rather than rely on a forum summary. In general, amateur rules tend to encourage or permit phonetic identification rather than require it for every transmission. The practical reason to use the standard set is that the listener, not the rulebook, decides whether you are understood. A word that is familiar to many operators in many countries is the safest choice. Ham-style alternatives are fine in good conditions and with familiar stations, but they cost you in three ways: The listener has to decode an unexpected word and may mishear it. "Kilowatt" for K is understood by many hams, but it is not part of the standard set.Cute or invented words can be impossible to place for non-native speakers, or someone who just tuned in.Different words for the same letter ("Mexico", "Mike"; "Nancy", "November") make it harder for the listener to settle on one letter.A decent rule: use the standard alphabet when the contact matters (DX, contest exchanges, weak signal, a net, traffic). Use something lighter only when you are chatting with a regular and the audio is clean. If you do use an alternative and the other station asks for a repeat, switch to the standard word straight away.
  21. I'd add one thing on after-action reports: write them while the details are still fresh, and have each position, such as net control, relay, logger and shelter station, give a few lines of input separately before anyone discusses it as a group. That way you get what each seat actually saw instead of one consensus story. Also, a single fix with a name and a date beats a long list. A reasonable pattern is to pick two or three items, assign each to a person, and check them at the next meeting. Typical candidates are standardizing message numbering, putting a printed net script in every go-kit, or checking battery runtime under a real load. Then verify the fix in the next exercise by building an inject that tests it. If a problem doesn't show up again, you know the change worked. If it does, the fix needs another look.
  22. For access problems I'd go in this order. First, confirm the input frequency. Check the offset size and the direction (+ or −), because on a repeater with a non-standard split the radio's automatic offset can be wrong. Second, check the tone you're transmitting. Third, check whether your radio is also decoding a tone on receive. If you have TSQL on and the repeater's output has no tone or a different one, you'll hear silence even though the machine is working. If you're unsure, turn off tone squelch while you troubleshoot, so you can at least confirm you hear the repeater. Most radios also have a reverse or input-monitor function. It swaps your receive frequency to the repeater input. If you can hear the other person well on the input, you're probably in direct simplex range and could move to a simplex frequency, which frees the repeater for people who need it. It also helps to know that CTCSS is sub-audible tone signalling, normally in the range of roughly 67 to 254 Hz. It is not a privacy feature. It only controls which signals the repeater, or your receiver, will act on. Many repeaters use it to keep out interference and distant co-channel signals. Some systems use DCS instead, which is a digital code rather than a tone, so check which one the owner specifies. When in doubt, the listing from your local coordinator or the repeater owner's own page beats a generic directory.
  23. Koch and Farnsworth solve different problems, so you can combine them. Koch is about the order in which you learn characters. You start with just two characters, sent at a fairly fast character speed (commonly somewhere around 18 to 20 WPM). You copy random groups of only those two until you're getting about 90 percent right. Then you add one more character, and so on through the alphabet, numbers and punctuation. The point is that you never learn a slow, countable version of a character. You learn the sound of the whole character as a unit from day one, which avoids the plateau many people hit when they have to speed up later. Farnsworth is about timing. The characters are sent at full speed, but the gaps between characters and words are stretched. That gives you time to recognize one character before the next arrives. If you use a trainer with separate settings for character speed and effective speed, you're using Farnsworth. Many people do Koch with a somewhat slower effective speed at first, then tighten the spacing as accuracy improves until the two speeds match. The thing to avoid is sending the characters themselves slowly. At very low character speeds, each letter becomes a pattern of long and short beeps you analyze, rather than one sound you recognize. On the tools: LCWO.net is a free web trainer built around the Koch approach. You make an account, it tracks your lesson progress, and you set character speed, effective speed and tone pitch. The G4FON Koch trainer is a downloadable program that does something similar offline, with configurable settings and random groups. Pick one and stick with it for a while. Switching trainers every few days wastes effort. Check each tool's own settings and documentation for the exact lesson order, because it varies between programs and it doesn't matter much as long as you keep following one. For session length, most advice converges on short and frequent. Fifteen to thirty minutes once or twice a day beats a long weekly session. Stop when your accuracy starts falling apart from fatigue, because practicing while tired mostly teaches errors.

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.